Моля, използвайте този идентификатор за цитиране или линк към този публикация:
http://elartu.tntu.edu.ua/handle/lib/45618
Заглавие: | Дослідження нестаціонарних процесів врізання в методі Pover Skiving |
Други Заглавия: | Investigation of non-stationary cut-in processes in Pover Skiving method |
Автори: | Грицай, Ігор Сліпчук, Андрій Кук, Андрій Hrytsay, Ihor Slipchuk, Andrii Kuk, Andrii |
Affiliation: | Національний університет «Львівська політехніка», Україна |
Bibliographic description (Ukraine): | Грицай І. Дослідження нестаціонарних процесів врізання в методі Pover Skiving / Ігор Грицай, Андрій Сліпчук, Андрій Кук // Матеріали Ⅰ Міжнародної науково-технічної конференції „Прикладна механіка“, 6-7 червня 2024 р. — Т. : ТНТУ, 2024. — С. 26–28. — (Сучасні технології машинобудування). |
Bibliographic description (International): | Hrytsay I., Slipchuk A., Kuk A. (2024) Doslidzhennia nestatsionarnykh protsesiv vrizannia v metodi Pover Skiving [Investigation of non-stationary cut-in processes in Pover Skiving method]. Proceeding of Ⅰ-st International Conference "Applied Mechanics" (Tern., 6-7 June 2024), pp. 26-28 [in Ukrainian]. |
Is part of: | Матеріали Ⅰ Міжнародної науково-технічної конференції „Прикладна механіка“, 2024 Proceeding of Ⅰ-st International Conference "Applied Mechanics", 2024 |
Conference/Event: | Ⅰ Міжнародна науково-технічна конференція „Прикладна механіка“ |
Journal/Collection: | Матеріали Ⅰ Міжнародної науково-технічної конференції „Прикладна механіка“ |
Дата на Публикуване: | 6-Юни-2024 |
Date of entry: | 28-Юни-2024 |
Издател: | ТНТУ TNTU |
Place of the edition/event: | Тернопіль Ternopil |
Temporal Coverage: | 6-7 червня 2024 р. 6-7 June 2024 |
UDC: | 622.24.051.55 |
Ключови Думи: | Power Skiving компютерне моделювання врізання шлях різання продуктивність Pover Skiving computer simulation cut-instage cutting path performance |
Number of pages: | 3 |
Page range: | 26-28 |
Start page: | 26 |
End page: | 28 |
Резюме: | Наведено результати дослідження процесу нарізання зубчастихколіс за методом Power Skiving на основі розроблених моделей недеформованої стружки та сили різання. На основі аналізу процесу різання на етапі врізання встановлено, що є можливість підвищення продуктивності процесу при збереженні якості коліс шляхом
скорочення сумарного шляху різання за рахунок багатократних коротких ходів на етапі врізання з наступним різанням на повну глибинупрофілю за 1-2 проходи The paper presents the results of the study of the process of cutting gears by the power-skiving method on the basis of the developed models of undeformed chips and cutting forces. Based on the analysis of the cutting process at the cгe-шt stage, it is established that it is possible to increase the productivity of the process while maintaining the quality of the gears by reducing the total cutting path through several short strokes at the сut-in stage, followed by cutting to the full depth of the profile in 1-2 strokes |
URI: | http://elartu.tntu.edu.ua/handle/lib/45618 |
ISBN: | 978-617-7875-80-1 |
Copyright owner: | © Тернопільський національний технічний університет імені Івана Пулюя, 2024 |
References (Ukraine): | 1. I. Hrytsay, A. Slipchuk, M. Bosansky. Justification of the Choice of Parameters for the Gear Power Skiving Operation Based on Computer Simulation. Strojnícky časopis- Journal of Mechanical Engineering. vol.73, no. 2, pp. 33-44. 2023 2. I. Hrytsai and A. Slipchuk. Features of using the over-skiving method for multi-pass cutting of external gears. Mech. Adv. Technol., vol. 7, no. 3 (99), pp. 317–324, 2023. |
References (International): | 1. I. Hrytsay, A. Slipchuk, M. Bosansky. Justification of the Choice of Parameters for the Gear Power Skiving Operation Based on Computer Simulation. Strojnícky časopis- Journal of Mechanical Engineering. vol.73, no. 2, pp. 33-44. 2023 2. I. Hrytsai and A. Slipchuk. Features of using the over-skiving method for multi-pass cutting of external gears. Mech. Adv. Technol., vol. 7, no. 3 (99), pp. 317–324, 2023. |
Content type: | Conference Abstract |
Показва се в Колекции: | І Міжнародна науково-технічна конференція "Прикладна механіка" присвячена 80-ти річчю з дня народження професора Ч.В. Пульки (2024) |
Файлове в Този Публикация:
Файл | Описание | Размер | Формат | |
---|---|---|---|---|
AM_2024_Hrytsay_I-Investigation_of_non_stationary_26-28.pdf | 717,36 kB | Adobe PDF | Изглед/Отваряне | |
AM_2024_Hrytsay_I-Investigation_of_non_stationary_26-28.djvu | 67,68 kB | DjVu | Изглед/Отваряне | |
AM_2024_Hrytsay_I-Investigation_of_non_stationary_26-28__COVER.png | 476,33 kB | image/png | Изглед/Отваряне |
Публикацияте в DSpace са защитени с авторско право, с всички права запазени, освен ако не е указно друго.