Mesedez, erabili identifikatzaile hau item hau aipatzeko edo estekatzeko:
http://elartu.tntu.edu.ua/handle/123456789/983
Título : | Термопружнопластичне деформування тонких круглих дисків при їх індукційному наплавленні |
Otros títulos : | Thermoplastic deformation of thin round disks under induction surfacing |
Autor : | Михайлишин, Володимир Михайлович Михайлишин, Михайло Стахович Mykhaylyshyn, V. Mykhaylyshyn, M. |
Bibliographic description (Ukraine): | Михайлишин В. Термопружнопластичне деформування тонких круглих дисків при їх індукційному наплавленні / Михайлишин В., Михайлишин М. // Конференція „Інформаційні моделі, системи та технології“ (20 травня 2011 р.). - Тернопіль: ТНТУ, 2011. |
Fecha de publicación : | 20-may-2011 |
Date of entry: | 5-may-2011 |
Editorial : | Тернопільський національний технічний університет ім. Івана Пулюя |
Place of the edition/event: | Тернопіль, Україна |
Palabras clave : | залишкові напруження залишкові деформації пластичні деформації температура наплавлення дисків residual stresses residual deformation plastic deformation temperature disks surfacing |
Resumen : | Побудована математична модель термопружнопластичного деформування круглих дисків в процесі наплавлення однієї з поверхонь вузькою полосою біля зовнішнього контуру. Модель дозволяє отримувати поля залишкових напружень і деформацій. |
Descripción : | Mathematic model of the thermal stress-strain deformation of the round disks during surfacing of one of the surfaces by the narrow strip near the outer duct, has been built. The model makes possible to obtain the residual stress and strain fields. |
URI : | http://elartu.tntu.edu.ua/handle/123456789/983 |
Content type: | Thesis |
Aparece en las colecciones: | Ⅰ науково-технічна конференція „Інформаційні моделі, системи та технології“ (2011) |
Ficheros en este ítem:
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.