Ezzel az azonosítóval hivatkozhat erre a dokumentumra forrásmegjelölésben vagy hiperhivatkozás esetén: http://elartu.tntu.edu.ua/handle/123456789/983
Teitl: Термопружнопластичне деформування тонких круглих дисків при їх індукційному наплавленні
Teitlau Eraill: Thermoplastic deformation of thin round disks under induction surfacing
Awduron: Михайлишин, Володимир Михайлович
Михайлишин, Михайло Стахович
Mykhaylyshyn, V.
Mykhaylyshyn, M.
Bibliographic description (Ukraine): Михайлишин В. Термопружнопластичне деформування тонких круглих дисків при їх індукційному наплавленні / Михайлишин В., Михайлишин М. // Конференція „Інформаційні моделі, системи та технології“ (20 травня 2011 р.). - Тернопіль: ТНТУ, 2011.
Dyddiad Cyhoeddi: 20-May-2011
Date of entry: 5-May-2011
Cyhoeddwr: Тернопільський національний технічний університет ім. Івана Пулюя
Place of the edition/event: Тернопіль, Україна
Allweddeiriau: залишкові напруження
залишкові деформації
пластичні деформації
температура
наплавлення дисків
residual stresses
residual deformation
plastic deformation
temperature
disks surfacing
Crynodeb: Побудована математична модель термопружнопластичного деформування круглих дисків в процесі наплавлення однієї з поверхонь вузькою полосою біля зовнішнього контуру. Модель дозволяє отримувати поля залишкових напружень і деформацій.
Disgrifiad: Mathematic model of the thermal stress-strain deformation of the round disks during surfacing of one of the surfaces by the narrow strip near the outer duct, has been built. The model makes possible to obtain the residual stress and strain fields.
URI: http://elartu.tntu.edu.ua/handle/123456789/983
Content type: Thesis
Ymddengys yng Nghasgliadau:Ⅰ науково-технічна конференція „Інформаційні моделі, системи та технології“ (2011)



Diogelir eitemau yn DSpace gan hawlfraint, a chedwir pob hawl, onibai y nodir fel arall.