Empreu aquest identificador per citar o enllaçar aquest ítem: http://elartu.tntu.edu.ua/handle/123456789/983
Títol: Термопружнопластичне деформування тонких круглих дисків при їх індукційному наплавленні
Altres títols: Thermoplastic deformation of thin round disks under induction surfacing
Autor: Михайлишин, Володимир Михайлович
Михайлишин, Михайло Стахович
Mykhaylyshyn, V.
Mykhaylyshyn, M.
Bibliographic description (Ukraine): Михайлишин В. Термопружнопластичне деформування тонких круглих дисків при їх індукційному наплавленні / Михайлишин В., Михайлишин М. // Конференція „Інформаційні моделі, системи та технології“ (20 травня 2011 р.). - Тернопіль: ТНТУ, 2011.
Data de publicació: 20-de -2011
Date of entry: 5-de -2011
Editorial: Тернопільський національний технічний університет ім. Івана Пулюя
Place of the edition/event: Тернопіль, Україна
Paraules clau: залишкові напруження
залишкові деформації
пластичні деформації
температура
наплавлення дисків
residual stresses
residual deformation
plastic deformation
temperature
disks surfacing
Resum: Побудована математична модель термопружнопластичного деформування круглих дисків в процесі наплавлення однієї з поверхонь вузькою полосою біля зовнішнього контуру. Модель дозволяє отримувати поля залишкових напружень і деформацій.
Descripció: Mathematic model of the thermal stress-strain deformation of the round disks during surfacing of one of the surfaces by the narrow strip near the outer duct, has been built. The model makes possible to obtain the residual stress and strain fields.
URI: http://elartu.tntu.edu.ua/handle/123456789/983
Content type: Thesis
Apareix a les col·leccions:Ⅰ науково-технічна конференція „Інформаційні моделі, системи та технології“ (2011)



Els ítems de DSpace es troben protegits per copyright, amb tots els drets reservats, sempre i quan no s’indiqui el contrari.