Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал:
http://elartu.tntu.edu.ua/handle/lib/45563
Повний запис метаданих
Поле DC | Значення | Мова |
---|---|---|
dc.contributor.author | Бица, Роман | |
dc.contributor.author | Семеген, Володимир | |
dc.contributor.author | Крук, Олег | |
dc.contributor.author | Bytsa, Roman | |
dc.contributor.author | Semehen, Volodymyr | |
dc.contributor.author | Kruk, Oleh | |
dc.coverage.temporal | 6-7 червня 2024 р. | |
dc.coverage.temporal | 6-7 June 2024 | |
dc.date.accessioned | 2024-06-28T15:31:54Z | - |
dc.date.available | 2024-06-28T15:31:54Z | - |
dc.date.created | 2024-06-06 | |
dc.date.issued | 2024-06-06 | |
dc.identifier.citation | Бица Р. Властивості регулярних мікрорельєфів як засобу забезпечення експлуатаційних властивостей поверхонь деталей машин / Роман Бица, Володимир Семеген, Олег Крук // Матеріали Ⅰ Міжнародної науково-технічної конференції „Прикладна механіка“, 6-7 червня 2024 р. — Т. : ТНТУ, 2024. — С. 12–14. — (Сучасні технології машинобудування). | |
dc.identifier.isbn | 978-617-7875-80-1 | |
dc.identifier.uri | http://elartu.tntu.edu.ua/handle/lib/45563 | - |
dc.description.abstract | Розглянуто переваги і недоліки формування поверхневих структур у вигляді регулярних мікрорельєфів для забезпечення експлуатаційних властивостей робочих поверхонь деталей машин. Встановлено напрями вдосконалення регулярних мікрорельєфів для усунення визначених недоліків | |
dc.description.abstract | The advantages and disadvantages of the formation of surface structures in the form of regular microreliefs to ensure the operational properties of the working surfaces of machine parts are considered. The areas of improvement of regular microreliefs to eliminate identified shortcomings have been established | |
dc.format.extent | 12-14 | |
dc.language.iso | uk | |
dc.publisher | ТНТУ | |
dc.publisher | TNTU | |
dc.relation.ispartof | Матеріали Ⅰ Міжнародної науково-технічної конференції „Прикладна механіка“, 2024 | |
dc.relation.ispartof | Proceeding of Ⅰ-st International Conference "Applied Mechanics", 2024 | |
dc.relation.uri | https://doi.org/10.1007/978-3-030-22365-6_57 | |
dc.relation.uri | https://doi.org/10.1371/journal.pone.0152100 | |
dc.relation.uri | https://doi.org/10.1049/mnl.2018.5535 | |
dc.relation.uri | https://doi.org/10.1016/j.jmrt.2019.07.044 | |
dc.relation.uri | https://doi.org/10.1007/s11668-024-01912-y | |
dc.relation.uri | https://doi.org/10.3390/lubricants11080341 | |
dc.relation.uri | https://doi.org/10.3390/s23135801 | |
dc.subject | регулярний мікрорельєф | |
dc.subject | поверхня | |
dc.subject | експлуатаційні властивості | |
dc.subject | тип | |
dc.subject | regular microrelief | |
dc.subject | surface | |
dc.subject | operational properties | |
dc.subject | type of microrelief | |
dc.title | Властивості регулярних мікрорельєфів як засобу забезпечення експлуатаційних властивостей поверхонь деталей машин | |
dc.title.alternative | Properties of regular microrelief as a means of ensuring theoperational properties of the surfaces of machine parts | |
dc.type | Conference Abstract | |
dc.rights.holder | © Тернопільський національний технічний університет імені Івана Пулюя, 2024 | |
dc.coverage.placename | Тернопіль | |
dc.coverage.placename | Ternopil | |
dc.format.pages | 3 | |
dc.subject.udc | 621.787.4 | |
dc.relation.references | 1. ISO 21920-2. GPS - Surface texture: Profile method - Part 2 - Terms, definitions and surface texture parameters. | |
dc.relation.references | 2. Hurey, I., Hurey, T., Gurey, V. (2020). Wear Resistance of Hardened Nanocrystalline Structures in the Course of Friction of Steel-Grey Cast Iron Pair in Oil- Abrasive Medium. In: Ivanov, V., et al. Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-22365-6_57 | |
dc.relation.references | 3. Wu W, Chen G, Fan B, Liu J (2016) Effect of Groove Surface Texture on Tribological Characteristics and Energy Consumption under High Temperature Friction. PLoS ONE 11(4): e0152100. https://doi.org/10.1371/journal.pone.0152100 | |
dc.relation.references | 4. Zhang, Y., Zeng, L., Wu, Z., Ding, X. and Chen, K. (2019), Synergy of surface textures on a hydraulic cylinder piston. Micro Nano Lett., 14: 424-429. https://doi.org/10.1049/mnl.2018.5535 | |
dc.relation.references | 5. Nagit G., Slatineanu L., Dodun O., Ripanu M., Mihalache A. (2019). Surface layer microhardness and roughness after applying a vibroburnishing process. Journal of Materials Research and Technology. 8. https://doi.org/10.1016/j.jmrt.2019.07.044 | |
dc.relation.references | 6. Dzyura, V., Maruschak, P., Semehen, V., Kruk O., Gurey V. Analysis of Causes that Lead to Failure of Conical Discs of Variable Automatic Transmissions. J Fail. Anal. and Preven. (2024). https://doi.org/10.1007/s11668-024-01912-y | |
dc.relation.references | 7. Swirad, S. Influence of Ball Burnishing on Lubricated Fretting of the Titanium Alloy Ti6Al4V. Lubricants 2023, 11, 341. https://doi.org/10.3390/lubricants11080341 | |
dc.relation.references | 8. Wu W, Chen G, Fan B, Liu J (2016) Effect of Groove Surface Texture on Tribological Characteristics and Energy Consumption under High Temperature Friction. PLoS ONE 11(4): e0152100. https://doi.org/10.1371/journal.pone.0152100 | |
dc.relation.references | 9. Slavov, S.; Van, L.S.B.; Dimitrov, D.; Nikolov, B. An Approach for 3D Modeling of the Regular Relief Surface Topography Formed by a Ball Burnishing Process Using 2D Images and Measured Profilograms. Sensors 2023, 23, 5801. https://doi.org/10.3390/s23135801 | |
dc.relation.referencesen | 1. ISO 21920-2. GPS - Surface texture: Profile method - Part 2 - Terms, definitions and surface texture parameters. | |
dc.relation.referencesen | 2. Hurey, I., Hurey, T., Gurey, V. (2020). Wear Resistance of Hardened Nanocrystalline Structures in the Course of Friction of Steel-Grey Cast Iron Pair in Oil- Abrasive Medium. In: Ivanov, V., et al. Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-22365-6_57 | |
dc.relation.referencesen | 3. Wu W, Chen G, Fan B, Liu J (2016) Effect of Groove Surface Texture on Tribological Characteristics and Energy Consumption under High Temperature Friction. PLoS ONE 11(4): e0152100. https://doi.org/10.1371/journal.pone.0152100 | |
dc.relation.referencesen | 4. Zhang, Y., Zeng, L., Wu, Z., Ding, X. and Chen, K. (2019), Synergy of surface textures on a hydraulic cylinder piston. Micro Nano Lett., 14: 424-429. https://doi.org/10.1049/mnl.2018.5535 | |
dc.relation.referencesen | 5. Nagit G., Slatineanu L., Dodun O., Ripanu M., Mihalache A. (2019). Surface layer microhardness and roughness after applying a vibroburnishing process. Journal of Materials Research and Technology. 8. https://doi.org/10.1016/j.jmrt.2019.07.044 | |
dc.relation.referencesen | 6. Dzyura, V., Maruschak, P., Semehen, V., Kruk O., Gurey V. Analysis of Causes that Lead to Failure of Conical Discs of Variable Automatic Transmissions. J Fail. Anal. and Preven. (2024). https://doi.org/10.1007/s11668-024-01912-y | |
dc.relation.referencesen | 7. Swirad, S. Influence of Ball Burnishing on Lubricated Fretting of the Titanium Alloy Ti6Al4V. Lubricants 2023, 11, 341. https://doi.org/10.3390/lubricants11080341 | |
dc.relation.referencesen | 8. Wu W, Chen G, Fan B, Liu J (2016) Effect of Groove Surface Texture on Tribological Characteristics and Energy Consumption under High Temperature Friction. PLoS ONE 11(4): e0152100. https://doi.org/10.1371/journal.pone.0152100 | |
dc.relation.referencesen | 9. Slavov, S.; Van, L.S.B.; Dimitrov, D.; Nikolov, B. An Approach for 3D Modeling of the Regular Relief Surface Topography Formed by a Ball Burnishing Process Using 2D Images and Measured Profilograms. Sensors 2023, 23, 5801. https://doi.org/10.3390/s23135801 | |
dc.identifier.citationen | Bytsa R., Semehen V., Kruk O. (2024) Vlastyvosti rehuliarnykh mikroreliefiv yak zasobu zabezpechennia ekspluatatsiinykh vlastyvostei poverkhon detalei mashyn [Properties of regular microrelief as a means of ensuring theoperational properties of the surfaces of machine parts]. Proceeding of Ⅰ-st International Conference "Applied Mechanics" (Tern., 6-7 June 2024), pp. 12-14 [in Ukrainian]. | |
dc.contributor.affiliation | Тернопільський національний технічний університет імені Івана Пулюя, Україна | |
dc.citation.journalTitle | Матеріали Ⅰ Міжнародної науково-технічної конференції „Прикладна механіка“ | |
dc.citation.spage | 12 | |
dc.citation.epage | 14 | |
dc.citation.conference | Ⅰ Міжнародна науково-технічна конференція „Прикладна механіка“ | |
Розташовується у зібраннях: | І Міжнародна науково-технічна конференція "Прикладна механіка" присвячена 80-ти річчю з дня народження професора Ч.В. Пульки (2024) |
Файли цього матеріалу:
Файл | Опис | Розмір | Формат | |
---|---|---|---|---|
AM_2024_Bytsa_R-Properties_of_regular_microrelief_12-14.pdf | 521,25 kB | Adobe PDF | Переглянути/відкрити | |
AM_2024_Bytsa_R-Properties_of_regular_microrelief_12-14.djvu | 42,75 kB | DjVu | Переглянути/відкрити | |
AM_2024_Bytsa_R-Properties_of_regular_microrelief_12-14__COVER.png | 448,58 kB | image/png | Переглянути/відкрити |
Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.