Palun kasuta seda identifikaatorit viitamiseks ja linkimiseks:
http://elartu.tntu.edu.ua/handle/lib/40622
Pealkiri: | Оптимізація параметрів 3Д друку для виоготовлення якісних виробів |
Teised pealkirjad: | optimization of 3D printing parameters for production of quality products |
Autor: | Харів, І. Я. Тимощук, В. Д. Золотий, Роман Захарійович Дідич, І. С. Khariv, I. Y. Tymoshchuk, V. D. Zolotyi, R. Z. Didych, I. S. |
Affiliation: | Тернопільський національний технічний університет імені Івана Пулюя, Україна |
Bibliographic description (Ukraine): | Оптимізація параметрів 3Д друку для виоготовлення якісних виробів / І. Я. Харів, В. Д. Тимощук, Р. З. Золотий, І. С. Дідич // ⅩⅠ Міжнародна науково-практична конференція молодих учених та студентів „Актуальні задачі сучасних технологій“, 7-8 грудня 2022 року. — Т. : ТНТУ, 2022. — С. 192. — (Комп’ютерно-інформаційні технології та системи зв’язку). |
Bibliographic description (International): | Khariv I. Y., Tymoshchuk V. D., Zolotyi R. Z., Didych I. S. (2022) Optymizatsiia parametriv 3D druku dlia vyohotovlennia yakisnykh vyrobiv [optimization of 3D printing parameters for production of quality products]. ⅩⅠ International scientific and practical conference of young researchers and students „Current issues in modern technologies“ (Tern., 7-8 December 2022), pp. 192 [in Ukrainian]. |
Is part of: | Матеріали ⅩⅠ Міжнародної науково-практичної конференції молодих учених та студентів „Актуальні задачі сучасних технологій“, 2022 Book of abstracts of the ⅩⅠ International scientific and practical conference of young researchers and students „Current issues in modern technologies“, 2022 |
Conference/Event: | ⅩⅠ Міжнародна науково-практична конференція молодих учених та студентів „Актуальні задачі сучасних технологій“ |
Journal/Collection: | Матеріали ⅩⅠ Міжнародної науково-практичної конференції молодих учених та студентів „Актуальні задачі сучасних технологій“ |
Ilmumisaasta: | 7-det-2022 |
Date of entry: | 15-vee-2023 |
Kirjastaja: | ТНТУ TNTU |
Place of the edition/event: | Тернопіль Ternopil |
Temporal Coverage: | 7-8 грудня 2022 року 7-8 December 2022 |
UDC: | 004.9 |
Number of pages: | 1 |
Page range: | 192 |
Start page: | 192 |
End page: | 192 |
URI: | http://elartu.tntu.edu.ua/handle/lib/40622 |
ISBN: | 978-617-7875-49-8 |
URL for reference material: | https://doi.org/10.1145/ |
References (Ukraine): | 1. P.K. Nukala, et al., Investigating the application of FDM 3D printing pattern in preparation of patient-tailored dosage forms, J. 3D Print. Med. 3 (1) (2019) 23-37. 2. R. Yi, C.M. Wu, Y.J. Liu, et al., RoboDLP: large object 3D printing using robotic arm, in: SIGGRAPH ASIA 2016 Posters (SA ‘16), Association for Computing Machinery, New York, NY, USA, 2016, pp. 1e2, https://doi.org/10.1145/ 3005274.3005284. Article 23. 3. Development of a large-scale multi-extrusion FDM printer, and its challenges / Md. Hazrat Ali, Syuhei Kurokaw, Essam Shehab, Muslim Mukhtarkhanov // International Journal of Lightweight Materials and Manufacture 6 (2023) 198-213. |
References (International): | 1. P.K. Nukala, et al., Investigating the application of FDM 3D printing pattern in preparation of patient-tailored dosage forms, J. 3D Print. Med. 3 (1) (2019) 23-37. 2. R. Yi, C.M. Wu, Y.J. Liu, et al., RoboDLP: large object 3D printing using robotic arm, in: SIGGRAPH ASIA 2016 Posters (SA ‘16), Association for Computing Machinery, New York, NY, USA, 2016, pp. 1e2, https://doi.org/10.1145/ 3005274.3005284. Article 23. 3. Development of a large-scale multi-extrusion FDM printer, and its challenges, Md. Hazrat Ali, Syuhei Kurokaw, Essam Shehab, Muslim Mukhtarkhanov, International Journal of Lightweight Materials and Manufacture 6 (2023) 198-213. |
Content type: | Conference Abstract |
Asub kollektsiooni(de)s: | Ⅺ Міжнародна науково-практична конференція молодих учених та студентів „Актуальні задачі сучасних технологій“ (2022) |
Failid selles objektis:
Fail | Kirjeldus | Suurus | Formaat | |
---|---|---|---|---|
MNPK_2022_Khariv_I_Y-optimization_of_3D_printing_192.pdf | 248,68 kB | Adobe PDF | Vaata/Ava | |
MNPK_2022_Khariv_I_Y-optimization_of_3D_printing_192.djvu | 58,73 kB | DjVu | Vaata/Ava | |
MNPK_2022_Khariv_I_Y-optimization_of_3D_printing_192__COVER.png | 1,27 MB | image/png | Vaata/Ava |
Kõik teosed on Dspaces autoriõiguste kaitse all.