Mesedez, erabili identifikatzaile hau item hau aipatzeko edo estekatzeko:
http://elartu.tntu.edu.ua/handle/lib/43717
Titulua: | Легування твердих сплавів на основі карбіду титану компонентами нанорозмірів |
Beste titulu batzuk: | Alloying hard alloys based on titanium carbide with nanosized components |
Egilea: | Баб’як, Д. А. Крамар, Галина Михайлівна Бодрова, Людмила Гордіївна Babiak, D. Kramar, H. Bodrova, L. |
Affiliation: | Тернопільський національний технічний університет імені Івана Пулюя, Україна |
Bibliographic description (Ukraine): | Баб’як Д. А. Легування твердих сплавів на основі карбіду титану компонентами нанорозмірів / Д. А. Баб’як, Галина Михайлівна Крамар, Людмила Гордіївна Бодрова // Матеріали ⅩⅡ Міжнародної науково-практичної конференції молодих учених та студентів „Актуальні задачі сучасних технологій“, 6-7 грудня 2023 року. — Т. : ФОП Паляниця В. А., 2023. — С. 26. — (Нові матеріали, міцність і довговічність елементів конструкцій). |
Bibliographic description (International): | Babiak D., Kramar H., Bodrova L. (2023) Lehuvannia tverdykh splaviv na osnovi karbidu tytanu komponentamy nanorozmiriv [Alloying hard alloys based on titanium carbide with nanosized components]. Book of abstracts of the ⅩⅡ International scientific and practical conference of young researchers and students „Actual problems of modern technologies“ (Tern., 6-7 December 2023), pp. 26 [in Ukrainian]. |
Is part of: | Матеріали ⅩⅡ Міжнародної науково-практичної конференції молодих учених та студентів „Актуальні задачі сучасних технологій“, 2023 Book of abstracts of the ⅩⅡ International scientific and practical conference of young researchers and students „Actual problems of modern technologies“, 2023 |
Conference/Event: | ⅩⅡ Міжнародна науково-практичноа конференція молодих учених та студентів „Актуальні задачі сучасних технологій“ |
Journal/Collection: | Матеріали ⅩⅡ Міжнародної науково-практичної конференції молодих учених та студентів „Актуальні задачі сучасних технологій“ |
Gordailuaren-data: | 6-Dec-2023 |
Date of entry: | 21-Jan-2024 |
Argitalpen: | ФОП Паляниця В. А. PE Palianytsia V.A. |
Place of the edition/event: | Тернопіль Ternopil |
Temporal Coverage: | 6-7 грудня 2023 року 6-7 December 2023 |
UDC: | 621.762.4 |
Number of pages: | 1 |
Page range: | 26 |
Start page: | 26 |
End page: | 26 |
URI: | http://elartu.tntu.edu.ua/handle/lib/43717 |
ISBN: | 978-617-7875-71-9 |
Copyright owner: | © Тернопільський національний технічний університет імені Івана Пулюя, 2023 |
URL for reference material: | http://dx.doi.org/10.5772/66871 http://www.scopus.com/inward/record.url?eid=2-s2.0-85125051868&partnerID=MN8TOARS https://doi.org/10.15330/pcss.21.3 https://doi.org/10.1016/j.prostr.2021.12.076 |
References (Ukraine): | 1. Antonín Kříž and David Bricín 2017 Powder etallurgy - Fundamentals and Case Studies. Properties and Testing of Cemented Carbides, Chapter 12, Pp. 273-297 http://dx.doi.org/10.5772/66871 2. J. Pötschke, T. Säuberlich, A. Vornberger, J.A. eese-Marktscheffel, 2018. Solid state sintered nanoscaled hardmetals and their properties, Int. J. Refract. Met. Hard.Mater. 72, 45–50. 3. Koval, I., Bodrova, L., Kramar, H., Mul, O., & Marynenko, S. (2014). Relationship between the structure and properties of polycarbide based hard alloys with nano-WC addings. In Euro PM 2014 Congress and Exhibition. Cermets-19_P3_EP140178 4. Kramar H., Bodrova L., Kovalchuk Y., Marynenko S., Koval I., 2018. Effect of binder with nano Ni on mechanical properties of TiC based hard alloys. Scientific Journal of TNTU, 91(3), 63-69. 5. Bukhta, V., Koval, I., Obuh, Y., Bodrova, L., Rusyn, B., Kramar, H. (2020). Effect of the nano-WC on the microstructure parameters of TiC–VC–NiCr based hard alloys. In Euro PM2020 Congress and Exhibition. , Code 177045, ISBN: 978-189907251-4, http://www.scopus.com/inward/record.url?eid=2-s2.0-85125051868&partnerID=MN8TOARS 6. Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr / S Pukas, L Zinko, N German, R Gladyshevskii, I Koval, L.Bodrova, H Kramar, S Marynenko Physics and Chemistry of Solid State. Volume 21, Issue 3, 30 September 2020/–ISSN 1729-4428, DOI: https://doi.org/10.15330/pcss.21.3. 496-502. 7. Koval, I., Bodrova, L., Kramar, H., Marynenko, S., Kovalchuk, Y., Prysyazhnyuk, P., & Shlapak, L. (2022). Influence of nano-Ni on the microstructure of multicarbide-based alloys. Procedia Structural Integrity, 36, 51-58. ISSN 2452-3216, https://doi.org/10.1016/j.prostr.2021.12.076. |
References (International): | 1. Antonín Kříž and David Bricín 2017 Powder etallurgy - Fundamentals and Case Studies. Properties and Testing of Cemented Carbides, Chapter 12, Pp. 273-297 http://dx.doi.org/10.5772/66871 2. J. Pötschke, T. Säuberlich, A. Vornberger, J.A. eese-Marktscheffel, 2018. Solid state sintered nanoscaled hardmetals and their properties, Int. J. Refract. Met. Hard.Mater. 72, 45–50. 3. Koval, I., Bodrova, L., Kramar, H., Mul, O., & Marynenko, S. (2014). Relationship between the structure and properties of polycarbide based hard alloys with nano-WC addings. In Euro PM 2014 Congress and Exhibition. Cermets-19_P3_EP140178 4. Kramar H., Bodrova L., Kovalchuk Y., Marynenko S., Koval I., 2018. Effect of binder with nano Ni on mechanical properties of TiC based hard alloys. Scientific Journal of TNTU, 91(3), 63-69. 5. Bukhta, V., Koval, I., Obuh, Y., Bodrova, L., Rusyn, B., Kramar, H. (2020). Effect of the nano-WC on the microstructure parameters of TiC–VC–NiCr based hard alloys. In Euro PM2020 Congress and Exhibition. , Code 177045, ISBN: 978-189907251-4, http://www.scopus.com/inward/record.url?eid=2-s2.0-85125051868&partnerID=MN8TOARS 6. Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr, S Pukas, L Zinko, N German, R Gladyshevskii, I Koval, L.Bodrova, H Kramar, S Marynenko Physics and Chemistry of Solid State. Volume 21, Issue 3, 30 September 2020/–ISSN 1729-4428, DOI: https://doi.org/10.15330/pcss.21.3. 496-502. 7. Koval, I., Bodrova, L., Kramar, H., Marynenko, S., Kovalchuk, Y., Prysyazhnyuk, P., & Shlapak, L. (2022). Influence of nano-Ni on the microstructure of multicarbide-based alloys. Procedia Structural Integrity, 36, 51-58. ISSN 2452-3216, https://doi.org/10.1016/j.prostr.2021.12.076. |
Content type: | Conference Abstract |
Bildumetan azaltzen da: | XІІ Міжнародна науково-практична конференція молодих учених та студентів „Актуальні задачі сучасних технологій“ (2023) |
Item honetako fitxategiak:
Fitxategia | Deskribapena | Tamaina | Formatua | |
---|---|---|---|---|
MNPK_2023_Babiak_D-Alloying_hard_alloys_based_on_26.pdf | 646,34 kB | Adobe PDF | Bistaratu/Ireki | |
MNPK_2023_Babiak_D-Alloying_hard_alloys_based_on_26.djvu | 26,1 kB | DjVu | Bistaratu/Ireki | |
MNPK_2023_Babiak_D-Alloying_hard_alloys_based_on_26__COVER.png | 1,31 MB | image/png | Bistaratu/Ireki |
DSpaceko itemak copyright bidez babestuta daude, eskubide guztiak gordeta, baldin eta kontrakoa adierazten ez bada.