Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал:
http://elartu.tntu.edu.ua/handle/lib/42881
| Назва: | Technologies of workpieces manufacturing |
| Інші назви: | Технології виробництва заготовок литтям |
| Автори: | Vasylkiv, Vasyl Danylchenko, Larysa Radyk, Dmytro Васильків, Василь Васильович Данильченко, Лариса Миколаївна Радик, Дмитро Леонідович |
| Приналежність: | Ternopil Ivan Puluj National Technical University, Ternopil, Ukrain Тернопільський національний технічний університет імені Івана Пулюя |
| Бібліографічний опис: | Васильків В. В. Технології виробництва заготовок литтям : навчальний посібник / В. В. Васильків, Л. М. Данильченко, Д. Л. Радик. – Тернопіль : Вид-во TНТУ імені Івана Пулюя, 2023. – 492 с. |
| Bibliographic description: | Vasylkiv V.V. Technologies of workpieces manufacturing by casting: manual / V.V. Vasylkiv, L.M. Danylchenko, D.L. Radyk. – Ternopil : Published TNTU named after Ivan Puluj, 2023. – 492 p. |
| Дата публікації: | чер-2023 |
| Дата внесення: | 28-лис-2023 |
| Видавництво: | Тернопільський національний технічний університет імені Івана Пулюя |
| Країна (код): | UA |
| Місце видання, проведення: | Тернопіль |
| УДК: | 621.01 621.74 |
| Кількість сторінок: | 492 |
| Короткий огляд (реферат): | У навчальному посібнику «Технології виробництва заготовок литтям» розглянуто еволюцію ливарного виробництва, сучасні методи одержання литих заготовок, класифікацію способів виробництва заготовок литтям, їх переваги та недоліки.
Подано фундаментальні основи сучасного виробництва литих заготовок, раціональні варіанти їх виготовлення; обладнання, інструменти та технологічне оснащення для різних технологічних режимів і умов. Для перевірки отриманих знань запропоновано тестові завдання з кожного розділу посібника.
Начальний посібник рекомендовано для здобувачів вищої освіти галузі знань 13 «Механічна інженерія», а також для інженерно-технічних працівників ливарної промисловості The manual «Technologies of Workpieces Manufacturing by Castings» provides knowledge regarding different foundry processes and their industrial importance. It is considered the modern techniques of processing raw materials by casting as an important stage of solving the tasks of designing technological processes for manufacturing the parts. The manual includes fundamentals of metal casting, the evolution of the foundry industry, basic casting techniques, the metal casting operations, methods of manufacturing the cast blanks; the most rational variants of their manufacturing; equipment, tools and machining attachments for making workpieces of machine elements and parts in different process specifications and conditions. Also focused on efficient design of casting runner, riser and gating system with minimal casting defects and solidification process. Multiple choice questions from each section of the manual are offered to test the acquired knowledge. Recommended for higher education seekers in 13 «Mechanical Engineering» majors, and can also be useful for engineering and technical specialists of foundry technologies in the mechanical engineering industry |
| Зміст: | INTRODUCTION...7 1. EVOLUTION OF THE METAL CASTING INDUSTRY...8 Multiple Choice Questions...18 2. METAL CASTING AS A MANUFACTURING PROCESS...22 Multiple Choice Questions...33 3. METALS AND ALLOYS USED IN METAL CASTING...38 Multiple Choice Questions...54 4. CLASSIFICATION OF METAL CASTING PROCESSES...58 Multiple Choice Questions...62 5. FUNDAMENTALS OF METAL CASTING 5.1. Metal casting basics...64 5.2. Metal casting operations...73 5.3. Gases in metal casting...80 5.4. Metal casting design...82 Multiple Choice Questions...90 6. EXPENDABLE MOLD CASTING 6.1. Sand casting...129 6.2. Plaster mold casting...140 6.3. Ceramic mold casting...143 6.4. Shell molding...146 6.5. Vacuum casting...152 6.6. Expanded polystyrene casting...158 6.7. Investment casting Multiple ...162 Choice Questions...169 7. PERMANENT MOLD CASTING 7.1. Basic permanent mold casting...204 7.2. Vacuum permanent mold casting...213 7.3. Slush casting...216 7.4. Die casting...223 7.4.1. Hot chamber die casting...233 7.4.2. Cold chamber die casting...240 7.5. Pressure die casting...248 7.5.1. Low pressure die casting...253 7.5.2. High pressure die casting...260 7.5.3. Gravity die casting...270 7.6. Centrifugal casting...276 7.6.1. True centrifugal casting...283 7.6.2. Semi-centrifugal casting...288 7.6.3. Centrifuge casting...294 7.7. Squeeze casting...299 7.8. Continuous casting...307 7.9. Evaporative pattern casting...314 7.9.1. Lost foam casting...325 7.9.2. Full mold casting...331 7.10. Stir casting...337 7.11. Ingot casting manufacture...341 Multiple Choice Questions...346 8. CASTING DEFECTS 8.1. Casting microstructure...411 8.2. Casting defects and remedies... Multiple Choice Questions...427 9. COMPUTER SYSTEMS FOR CASTING PROCESSES SIMULATION...433 GLOSSARY...446 REFERENCES...482 |
| URI (Уніфікований ідентифікатор ресурсу): | http://elartu.tntu.edu.ua/handle/lib/42881 |
| ISBN: | 978-966-305-124-6 |
| Власник авторського права: | © V. Vasylkiv, L. Danylchenko, D. Radyk, 2023 © Ternopil Ivan Puluj National Technical University, 2023 © В. Васильків, Л. Данильченко, Д. Радик, 2023 © Тернопільський національний технічний університет ім. Івана Пулюя, 2023 |
| Перелік літератури: | 1. 36th-45th Census of World Casting Production. Modern Casting 12 (2001-2011). 2. 45th Census of World Casting Production. Modern Casting 12 (2016), 16-19. 3. Analysis of Casting Defects, AFS, Des Plaines, IL, 1974. 4. Ashby M.F., Material Selection in Mechanical Design, Butterworth-Heinemann, 1999. 5. ASM Handbook Volume 15: Casting – ASM International. 6. ASM Handbook, Vol. 15, Casting, 2008, “History and Trends of Metal Casting,” pp. 3–15. 7. Baron C., Bartocha D., and Szajnar J. (2007). The determination of the thickness of composite layer for ball casting. Archives of Materials Science and Engineering, 28(7): 425-428. [Google Scholar]. 8. Bawa H.S., Manufacturing processes -II. New York: Tata McGraw-Hill Education; 2004. 9. Beeley P.R. Foundry technology. Butterworth-Heinemann; 2001. 10. Booth G.N., “Defining Quality through SPC: Foundry Applications,”Modern Casting, 75: 27–32, May 1985. 11. Bralla J.B., Design for manufacturability handbook, McGraw Hill handbooks, 2nd edition, New york. 40. Greer S.E., A comparison of the ancient metal casting materials and processes to modern metal casting materials and processes. Hartford, Connecticut: Master of Mechanical Engineering. Rensselaer Polytechnic Institute; 2009. 41. Groover M.P., Fundamentals of modern manufacturing: materials, processes, and systems. Hoboken: Wiley; 2010. 42. Haga T. and Takahashi K. (2004). Downward melt drag twin roll caster. Journal of Materials Processing Technology, 157: 706-711. https://doi.org/10.1016/j.jmatprotec.2004.07.129. [Google Scholar]. 43. Heijkoop T. and Sare I.R. (1989). Cast-bonding - A new process for manufacturing composite wear products. Cast Metals, 2(3): 160-168. https://doi.org/10.1080/09534962.1989.11818997. [Google Scholar]. 44. Heine R.W., Loper C.R., Rosenthal Jr., and P.C., Principles of Metal Casting, McGraw-Hill Book Company, New York, 1967. 45. International Atlas of Casting Defects, AFS, Des Plaines, IL, 1999. 46. Kalpakjian S., Schmid S.R., Manufacturing Processes for Engineering Materials, Pearson education, 2009. 47. Kalpakjian S., Schmid S., Manufacturing engineering & technology. 7 ed. Upper Saddle River: Prentice Hall; 2013. 48. Krouth T.J. Foundry tooling and metal castings in days. Proceedings of international conference worldwide advances in rapid and high-performance tooling, EuroMold, Frankfurt/M, Germany; 2002. 49. Kurt B. and Calik A. (2009). Interface structure of diffusion bonded duplex stainless steel and medium carbon steel couple. Materials Characterization, 60(9): 1035-1040. https://doi.org/10.1016/j. matchar.2009.04.011. [Google Scholar]. 102. https://www.reliance-foundry.com/blog/metal-casting-methods 50. Kurt B., Orhan N., and Hasçalık A. (2007). Effect of high heating and cooling rate on interface of diffusion bonded gray cast iron to medium carbon steel. Materials and Design, 28(7): 2229-2233. https://doi.org/10.1016/j.matdes.2006.06.002. [Google Scholar]. 51. Li C., Wei Z., Chenhong W., Baochang J., Qingchun X., Application of digital pattern-less molding technology to produce art casting. Research and Development, China Foundry 2014;11. 52. “Lost Foam Casting,” chapter by Q. Han, C. Song, and M. Marlatt, Technology for Magnesium Production: Design, Products and Applications, M. Sahoo (as principal author), American Foundry Society, 2011, pp. 161–182. 53. Magendran Parashar B.S. & R.K. Mittal, “Elements of Manufacturing Processes”, Prentice Hall of India, 2003. 54. Manual of Casting Defects, 2d ed., S&B Industrial Minerals, GMBH, Marl, Germany, 2006. 55. Marukovich E.I., Branovitsky A.M., Na Y.S., Lee J.H., and Choi K.Y. (2006). Study on the possibility of continuous-casting of bimetallic components in condition of direct connection of metals in a liquid state. Materials and Design, 27(10): 1016-1026. https://doi.org/10.1016/j. matdes.2005.02.007. [Google Scholar]. 56. Mold and Core Test Handbook. American Foundrymen’s Society; 1978. 57. Nerl C., Wimmer M., Hoffmann H., Kaschnitz E., Langbein F., and Volk W. (2014). Development of a continuous composite casting process for the production of bilayer aluminium strips. Journal of Materials Processing Technology, 214(7): 1445-1455. https://doi.org/10.1016/j. jmatprotec.2014.02.018. [Google Scholar]. 58. Pandey P.C. and Singh C.K., Production Engineering Sciences, Standard Publishers Ltd., 2003. 59. Pattnaik S, Karunakar DB, Jha PK. Developments in investment casting process—a review. J Mater Process Technol. 2012;212:2332-48. doi:10.1016/j.jmatprotec.2012.06.003. 103. https://www.giessereilexikon.com/en/foundry-lexicon/Encyclopedia/show/casting-processes-4630/?cHash=ead95e596b0af3dbaedacd90fe57fbfd 60. Peterson M.B. and Winer W.O. (1980). Wear control handbook. American Society of Mechanical Engineers, New York City, USA. [Google Scholar]. 61. Pribulova A., Mihok L., Lastivka A., Archives of Foundry Engineering 20 (2006), 93-100. 62. Pylypets, M., Danylchenko, L. (2019). Simulation modeling in designing applications for sheet metal forming. In: Preceeding of the XXI-th scientific conference of Ternopil Ivan Pul’uj National Technical University, Ternopil, Ukraine, May 2019. Ternopil: TNTU, pp. 13-14. 63. Rajkolhe R., Khan J.G., Defects, causes and their remedies in casting process: a review. Int. J. Res. Advent. Technol. 2014; 2:2321–963. 64. Ramadan M. (2018). Interface structure and elements diffusion of as-cast and annealed ductile iron/stainless steel bimetal castings. Engineering, Technology and Applied Science Research, 8(2): 2709-2714. [Google Scholar]. 65. Rao P.N., “Manufacturing Technology”, 2nd Edition, Tata McGraw-Hill Publishing Limited, 2002. 66. Ravi B., Metal casting: computer-aided design and analysis. PHI Learning Pvt. Ltd.; 2005. 67. Rundman K.B., Metal casting. Dep Mater Sc. Eng. Mich. Technol. Univ Michagan 2000:17–9. 22. 68. Schey J.A., Introduction to manufacturing processes. New York: McGraw-Hill; 1987. 69. Schey John A., Introduction to Manufacturing Processes, Mcgraw Hill, 3rdEdition, 2000. 104. https://www.voxeljet.com/additive-manufacturing/casting-process/ 70. Sharma P.C., A Text Book of Production Technology, 4th Edition, S. Chand and Company, 2003. 71. Simpson B.L., History of the metal-casting industry. 2nd ed. Revised ed. American Foundrymen’s Society; 1969. 72. Simpson B.L., Development of the Metal Castings, Industry, American Foundrymen's Association, Chicago, 1948. 73. Singh .R, Singh J.P., Comparison of rapid casting solutions for lead and brass alloys using three-dimensional printing. Proc. Inst. Mech. Eng. Part C.J. Mech. Eng. Sc. 2009; 223:2117–23. 74. Singh J.P., Singh R., Investigations for a statistically controlled rapid casting solution of lead alloys using three-dimensional printing. Proc. Inst. Mech. Eng. Part C.J. Mech. Eng. Sc. 2009; 223:2125–34. 75. Singh R, Singh JP. Comparison of rapid casting solutions for lead and brass alloys using three-dimensional printing. Proc Inst Mech Eng Part C J Mech Eng Sci. 2009;223:2117-23. doi:10.1243/09544062JMES1387. 76. Smith C.S., The Early History of Casting, Molds, and the Science of Solidification, in A Search for Structure: Selected Essays on Science, Art, and History, MIT Press, Cambridge, MA and London, 1981, p 127-173. 77. Spada K., Modern Casting: Annual Census of Casting Production, 47th Census of World Casting Production, December 2013, pp. 18–23. 78. Swift K.G., Booker J.D., Chapter 3 - Casting processes. In: Booker KGSD, Manuf. Process Sel. Handb., Oxford: Butterworth-Heinemann; 2013, p. 61–91. 79. Vasylkiv V.V., Radyk D.L., Danylchenko L.M., Methodical instructions for practice work № 1 on the topic: “Research of the use of additive technologies in modern enterprises” in the course “Innovative technologies in mechanical engineering”. - Ternopil, 2021. - 11 p. 105. https://www.chinasavvy.com/pros-and-cons-of-casting-processes 106. 80. Vasylkiv V., Pylypets M., Danylchenko L., Radyk D. Use of computer-integrated technologies in training of engineering specialists. In: Ternopil National Ivan Puluj Technical University, Proceedings of the International Сonference Advanced Applied Energy and Information Technologies, Ternopil, December 15-17, 2021, pp. 74-80. 81. Vasylkiv V., Danylchenko L., Radyk D. Technological methods of workpieces manufacturing. Metal Casting: Manual / V. Vasylkiv, L. Danylchenko, D. Radyk. Edited by L. Dzhydzhora. – Ternopil: Osadtsa U.V., 2021. – 203 p. 82. Васильків В.В. Структурна декомпозиція, синтез і вибір альтернатив при формуванні структури нових технічних систем / В. Васильків // Вісник ХНТУСГ ім. П. Василенка: “Проблеми технічної експлуатації машин. Системотехніка і технології лісового комплексу”. – Харків: ХНТУСГ. – 2010. – Вип. 94. – С. 222 – 230. 83. Пилипець М.І., Васильків В.В., Радик Д.Л., Бобрик В.В. Комп’ютерні технології в машинобудуванні. Основи 3D моделювання в середовищі T-FLEX CAD: Навчальний посібник [Текст] / Тернопіль: ТНТУ ім. І.Пулюя, 2012. – 560 с. 84. Методичні вказівки для виконання індивідуальних навчально-дослідних завдань з дисципліни: “Генеративний дизайн та оптимізація у виробничих технологіях” / Укладачі: В.В. Васильків, М.І. Пилипець, Л.М. Данильченко. - Тернопіль: ТНТУ, 2021. – 12 с. 85. Zum Gahr K.H. (1987). Microstructure and wear of materials. Vol. 10, Elsevier, Amsterdam, Netherlands. [Google Scholar]. 86. Yasniy P., Marushchak P., Lapusta Yu., Baran D. (2006) Evaluation of in-service surface cracking of rolls of continuous casting machines. Mechanical Fatigue of Metals: Proceeding of the 13-th International Colloquium (MFM) (Tern., 25-28 September 2006), P. 232. 87. https://www.sciencedirect.com/topics/engineering/casting-process 88. https://www.sciencedirect.com/science/article/abs/pii/B9780750654371500056 89. https://www.rapiddirect.com/blog/different-types-of-casting-process/ 106. https://www.generalkinematics.com/blog/metal-casting-process-explained/ 90. https://www.thomasnet.com/articles/custom-manufacturing-fabricating/types-of-casting-processes/ 91. https://www.iqsdirectory.com/articles/metal-casting/types-of-casting-processes.html 92. https://caststeelproducts.com/casting-process/ 93. https://www.iitg.ac.in/engfac/ganu/public_html/Metal%20casting%20processes_1.pdf 94. https://www.machinemfg.com/types-of-casting/ 95. https://themechanicalengineering.com/casting-process/ 96. https://blog.transvalorusa.com/articles/different-methods-of-casting 97. https://www.aigomachinery.com/?gclid=CjwKCAjwyeujBhA5EiwA5WD7_VBT71acozyEflxfLAt9cn39S2vF7si3fYInFJ3YfTcYXP7BTg80bRoCJigQAvD_BwE 98. https://www.matechin.com/company_overview/?gclid=CjwKCAjwyeujBhA5EiwA5WD7_fkMeFqk5N3b4gbXUABVvaebqS6Os7u94vZg6gbG7QLVriXsfn0echoC2-4QAvD_BwE 99. https://www.gibsoncentritech.com/ 107. https://drive.uqu.edu.sa/_/ahbackar/files/MFG_Chapter11.pdf 100. https://blog.transvalorusa.com/articles/different-methods-of-casting 101. https://www.linkedin.com/pulse/what-different-types-casting-processes-nabtech-engineering 108. http://www.centrifugalcasting.co.in/?gclid=CjwKCAjwyeujBhA5EiwA5WD7_aCbBpfMs2B4-b8J9cBzNUyiGikHUsDz0tIZu4G1yJX6GRqd5IDQfxoCjEAQAvD_BwE 109. https://www.matechin.com/IronCastingPlant/?gclid=CjwKCAjwyeujBhA5EiwA5WD7_U8uJg1auKpNTYrzQBgXXa_UxrLasgN-qGT9O-IXGAcSLgu9Oy-aqBoC2lkQAvD_BwE 110. https://www.gibsoncentritech.com/ 111. https://bernierinc.com/casting-process-explained/ 12. Büchner H.J., World Casting Production – Forecast 2011. Düsseldorf April, 7, 2011. 112. https://www.gwcast.com/common-casting-methods 113. https://sinowayindustry.com/.well-known/captcha/?r=%2Fadvantages-and-disadvantages-of-casting%2F 114. https://oeform.com/.well-known/captcha/?r=%2Fdifferent-types-of-metal-casting-processes%2F 115. https://engineeringproductdesign.com/knowledge-base/metal-casting/ 116. https://www.researchgate.net/publication/300476208_Metal_Casting_Processes 117. https://www.matechin.com/IronCastingPlant/?gclid=CjwKCAjwyeujBhA5EiwA5WD7_YzKnyVeN3BrDrbEm1GSoaHM07gIWGAxw9gX3Fe7teYgNNh7-aKayhoCoVEQAvD_BwE 118. https://omnidexcastings.com/metal-casting-processes/ 119. https://www.intechopen.com/books/11119 120. https://www.roymech.co.uk/manufacturing-processes/casting/ 121. https://www.engineersedge.com/casting_design.htm 13. Buhr R.K., Warda R.D., Whiting L.V., Davis K.G., and Sahoo M., The State of Foundry Technology as Measured by a Mobile Foundry, Transactions of American Foundrymen's Society, 96: 171–182, 1988. 122. https://xometry.eu/en/die-casting-general-overview-process-materials-applications/ 123. https://www.deecometals.com/casting-processes 124. https://www.grenzebach.com/en/products/casting-parts/casting-process-casting-materials/ 125. https://www.slideshare.net/kiran_wakchaure/casting-process-70390793 126. https://www.spark-machinery.com/product/foundry-metal-gearbox-sand-casting-part?gclid=CjwKCAjwyeujBhA5EiwA5WD7_YlEzr89xTch6xF98z1O0HFZQov6mgPt89Y5dpf5MnTr043epiHHbBoCvVUQAvD_BwE 127. http://www.me.nchu.edu.tw/lab/CIM/www/courses/Manufacturing%20Processes/Ch11-CastingProcesses-Wiley.pdf 128. https://www.totalmateria.com/page.aspx?ID=CheckArticle&site=ktn&NM=59 129. https://thelibraryofmanufacturing.com/metalcasting_basics.html 130. https://www.mrt-castings.co.uk/which-casting-process-should-I-use.html 131. https://www.steel-foundry.com/blog/how-to-choose-the-suitable-casting-process-for-cast-iron/ 14. Butler W.A., Timelli G., Battaglia E., Bonollo F., Die Casting (Permanent Mold). Ref. Module Mater. Science Mater. Eng., Elsevier; 2016. 15. CAEF Committee of Associations of European Foundries (Information materials). 132. https://lms.su.edu.pk/lesson/1832/week-4-metal-casting-processes-and-equipment 133. https://plymouthfoundry.com/metal-casting-process-types-advantages-stages-uses/ 134. https://dl.asminternational.org/handbooks/edited-volume/27/chapter/362374/Shape-Casting-Processes-An-Introduction 135. https://www.tfgusa.com/what-is-metal-casting/ 136. https://www.empdiecasting.com/?gclid=CjwKCAjwyeujBhA5EiwA5WD7_emdsmCtPV6KDwyqv9lL4TzboidoHamGsKmbh0O3NZtn8OzWkTaiUBoCgKYQAvD_BwE 137. https://www.thecrucible.org/guides/metalworking/metal-casting/ 138. https://www.iitg.ac.in/engfac/ganu/public_html/Metal%20casting%20processes_1.pdf 139. https://amitkumarsmiley.weebly.com/uploads/7/2/9/8/7298199/__casting_process.pdf 140. https://www.me.iitb.ac.in/ramesh/courses/ME206/Casting1.pdf 141. https://www.vssut.ac.in/lecture_notes/lecture1423455076.pdf 16. Campbell J., Casting, Butterworth-Heinemann, 2003. 142. https://www.newtondesk.com/casting-study-notes-hand-written/ 143. http://www.moderneq.com/pdf/MIT_Casting_Processes.pdf 144. https://lecturenotes.net/uploads/lesson_files/db2dede1083def95b6e2c3f368488cff.pdf 145. https://ru.scribd.com/document/111431806/Foundary-Notes?utm_medium=cpc&utm_source=google_pmax&utm_campaign=3Q_Google_Performance-Max_RoW&utm_term=&utm_device=c&gclid=CjwKCAjwyeujBhA5EiwA5WD7_cpzrNYMHZExQ7m4PcJxOXIdahVm4h6RWA23-vExQTPjWSeVn51bzRoC1jkQAvD_BwE 146. https://faculty.ksu.edu.sa/sites/default/files/ch_casting-1.pdf 147. http://mech14.weebly.com/uploads/6/1/0/61069591/casting.pdf 148. https://sist.sathyabama.ac.in/sist_coursematerial/uploads/SMEA1401.pdf 149. https://thegatehunt.com/mechanical-engineering-made-easy-casting-full-notes-free-download/ 150. https://www.refcoat.com/pdf/book-on-metal-casting.pdf 151. https://uomustansiriyah.edu.iq/media/lectures/5/5_2020_03_03!11_57_57_AM.pdf 17. Campbell J.S., Principles Of Manufacturing Materials And Processes, Tata McGraw Hill, 1995. 152. https://igitsarang.ac.in/assets/documents/coursematerial/cwt_notes_1601998382.pdf 153. https://semesters.in/casting-terms-definitions-and-terminology-notes-and-pdf/ 154. https://themechanicalengineering.com/difference-between-forging-and-casting/ 155. https://www.studynama.com/community/threads/metal-casting-quick-revision-pdf-notes-book-ebook-for-mechanical-engineering-3rd-year-free-download.318/ 156. https://www.studocu.com/in/document/delhi-technological-university/mechanical/casting-process-of-metals-detailed-notes/14772753 157. https://www.energy.gov/eere/amo/articles/itp-metal-casting-implementation-metal-casting-best-practices 158. https://easyengineering.net/metal-casting-ace-engineering-academy/ 159. https://old.amu.ac.in/emp/studym/100005546.pdf 160. https://www.ijert.org/research/causes-of-casting-defects-with-remedies-IJERTV4IS110511.pdf 161. https://mechanicalenotes.com/types-of-casting-allowances-and-defects/ 18. Casting Copper-Base Alloys, edited by Ducharme S., Sahoo M.and Sadayappan K. 2d ed., Schaumburg, IL, 2007. 162. https://www.researchgate.net/publication/228533440_Computer-aided_casting_method_design_simulation_and_optimization 163. https://www.annualreviews.org/doi/abs/10.1146/annurev.ms.20.080190.000533?journalCode=matsci.1 19. Casting Defects Handbook: Aluminum & Aluminum Alloys, AFS, Schaumburg, IL, 2011. 20. Casting Defects Handbook: Copper and Copper-Base Alloys, AFS, Schaumburg, IL, 2010. 21. Casting Defects Handbook: Iron and Steel, AFS, Schaumburg, IL, 2008. 22. Chhabra M, Singh R., Experimental investigation of pattern-less casting solution using additive manufacturing technique. MIT Int J Mech Eng. 2011;1:17–25. 23. Chirita G., Soares D., Silva F.S., Advantages of the centrifugal casting technique for the production of structural components with Al–Si alloys. Mater Des. 2008;29:20–7. 24. Dańko J., Holtzer M., Metalurgija 45 (2006) 4, 333-340. 25. Danylchenko L. (2021) Comparative analysis of computer systems for casting processes simulation. In: Ternopil National Ivan Puluj Technical University, Proceedings of the International Сonference Advanced Applied Energy and Information Technologies, Ternopil, December 15-17, 2021, pp. 105-113. 26. Danylchenko L., Yousif Duhair. Investigation of machining parameters in the design of CNC technologies / Book of abstract of the International scientific and technical student’s conference “Fundamental and applied sciences. Actual guestions” 26th-27th of April 2018. – Ternopil: TNTU, 2018. – P. 203-204. 27. Danylchenko, L., Radyk, D., Features of introduction the additive technologies in workpieces’ manufacturing processes. In: Preceeding of the International Scientific and Technical Conference dedicated to the memory of Prof. Hevko B. “Problems of design theory and manufacture of transport and technological machines”, Ternopil, Ukraine, September 2021. Ternopil: TNTU, pp. 26-27. 28. Danylchenko L., Radyk D., Research of methods of strengthening of parts by surface plastic deformation / Book of abstract of the XX-th scientific conference of Ternopil Ivan Pul’uj National Technical University 17th-18th of May 2017. – Ternopil: TNTU, 2019. – P. 21. 29. Danylchenko L.M., Shushkevych О.Y., Research of technological methods of strengthening the surffce layer of details of machines / Book of abstract of the International scientific and technical student’s conference “Fundamental and applied sciences. Actual guestions” 25th-26th of April 2017. – Ternopil: TNTU, 2017. – P. 157-158. 30. Данильченко Л.М., Кошланський Д.С. Застосування безвідходних і прогресивних технологій в процесах виготовлення деталей / Матеріали VIІІ Всеукраїнської студентської науково- 484 технічної конференції «Природничі та гуманітарні науки. Актуальні питання». - Тернопіль: ТНТУ, 2015. – С. 173. 31. Данильченко Л.М., Хассан Ахмед. Дослідження методів протидії тепловим деформаціям деталей в процесі їх виготовлення і експлуатації / Збірник тез доповідей VІІ Міжнародної науково-технічної конференції молодих учених та студентів ТНТУ ім. І. Пулюя “Актуальні задачі сучасних технологій” 26-27 листопада 2018 р. - Тернопіль: ТНТУ, 2018. - С. 82-83. 32. Degarmo E. Paul, Black J.T., Kohser Ronald A., Materials and processes in manufacturing, John Wiley and sons, 8th edition, 1999. 33. Deter G.E., Engineering Design, McGraw-Hill,1999. 34. Dieter G.E., Mechanical Metallurgy, McGraw-Hill, 1961. 35. Enright T.P., “Statistical Methods Reduce Casting Defects,” Modern Casting, 78: 51–52, Nov. 1988. 36. Foster J., “The Iron Age Moulds From Gussage All Saints,” Occasional Paper No. 12, British Museum, London, 1980. 37. Gawronski J., Szajna J., and Wróbel P. (2004). Study on theoretical bases of receiving composite alloy layers on surface of cast steel castings. Journal of Materials Processing Technology, 157: 679-682. https://doi.org/10.1016/j.jmatprotec.2004.07.153/ [Google Scholar]. 38. Ghomashchi M.R., Vikhrov A., Squeeze casting: an overview. J. Mater Process Technol. 2000;101:1–9. 39. Ghosh A. and Mallik A.K., Manufacturing Science, Affiliated East-West Press Private Limited, New Delhi, 2001. |
| Тип вмісту: | Handbook |
| Розташовується у зібраннях: | Навчальна література кафедри інжинірингу машинобудівних технологій |
Файли цього матеріалу:
| Файл | Опис | Розмір | Формат | |
|---|---|---|---|---|
| Radyk_Technologies_ of_ workpieces_ manufacturing_2023.pdf | 10,65 MB | Adobe PDF | Переглянути/відкрити | |
| Radyk_Technologies_ of_ workpieces_ manufacturing_COVER_2023.jpg | 252,74 kB | JPEG | Переглянути/відкрити |
Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.
Інструменти адміністратора