Veuillez utiliser cette adresse pour citer ce document : http://elartu.tntu.edu.ua/handle/lib/39568

Titre: Laser welding of polyethylene films
Autre(s) titre(s): Лазерне зварювання поліетиленових плівок
Auteur(s): Кораб, Микола Георгійович
Юрженко, Максим Володимирович
Ващук, Аліна
Менжерес, Марина
Korab, Mykola
Iurzhenko, Maksym
Vashchuk, Alina
Menzheres, Marina
Affiliation: Інститут електрозварювання імені Є. О. Патона НАН України, Київ, Україна
E.O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv, Ukraine
Bibliographic description (Ukraine): Laser welding of polyethylene films / Mykola Korab, Maksym Iurzhenko, Alina Vashchuk, Marina Menzheres // Scientific Journal of TNTU. — Tern. : TNTU, 2021. — Vol 104. — No 4. — P. 68–73.
Bibliographic description (International): Korab M., Iurzhenko M., Vashchuk A., Menzheres M. (2021) Laser welding of polyethylene films. Scientific Journal of TNTU (Tern.), vol. 104, no 4, pp. 68-73.
Is part of: Вісник Тернопільського національного технічного університету, 4 (104), 2021
Scientific Journal of the Ternopil National Technical University, 4 (104), 2021
Journal/Collection: Вісник Тернопільського національного технічного університету
Issue: 4
Volume: 104
Date de publication: 25-jan-2022
Submitted date: 27-nov-2021
Date of entry: 25-déc-2022
Editeur: ТНТУ
TNTU
Place of the edition/event: Тернопіль
Ternopil
DOI: https://doi.org/10.33108/visnyk_tntu2021.04.068
UDC: 621.791
678.029.43
Mots-clés: зварні з’єднання
поліетиленові плівки
трансмісійне лазерне зварювання
діодні лазери
welded joints
polyethylene films
transmission laser welding
diode laser
Number of pages: 6
Page range: 68-73
Start page: 68
End page: 73
Résumé: В даний час постійно розширюються сфери застосування лазерного зварювання, зокрема для з’єднання полімерних плівок різних типів. Цей спосіб зварювання успішно конкурує з традиційними способами, такими, як зварювання нагрітим інструментом та ультразвуком при проведенні робіт у легкій, медичній, харчовій промисловості, пакуванні. Переваги лазерного зварювання – відсутність безпосереднього контакту між джерелом енергії та поверхнями, що нагріваються, та можливість у широких межах змінювати інтенсивність нагрівання регулюючи температуру випромінювача та відстань до нього. Найпоширенішою в даний час технологією лазерного зварювання є трансмісійний (проникний) метод для напускних з’єднань, що використовує ефект прозорості деяких полімерних матеріалів для лазерного променя. У роботі проведено трансмісійне зварювання малопотужним короткофокусним лазером поліетиленових плівок різних типів. Зварювання внапуск проведено за допомогою діодного лазера потужністю 1 Вт з довжиною хвилі випромінювання 532 нм (зелений колір світлового видимого діапазону). Лазер на притискній платформі переміщали вздовж лінії з’єднання за допомогою механічного візка. Під час зварування відбувалося формування шва шириною 0,8–1 мм та невеликою опуклістю назовні за рахунок розширення розплавленого полімерного матеріалу. Проведено експериментальні дослідження впливу основних параметрів процесу лазерного зварювання внапуск на морфологію з’єднань поліетиленових плівок марок Т та Н. Показано, що для зварювання плівок у діапазоні товщин 0,015–0,1 мм не потрібне вартісне лазерне обладнання, а для утворення якісного з’єднання достатньо лазера потужністю не більше 1 Вт. Якість напускних зварних з’єднань плівок оцінювали візуальним оглядом, вивченням під мікроскопом та випробовуваннями на відрив. Проведені дослідження експериментальних зварних швів показали їх міцність на рівні основного матеріалу.
Currently, the scope of application of laser welding is constantly expanding, in particular for the connection of polymer films of different types. This method of welding successfully competes with traditional methods, such as welding with heated tools and ultrasound in the light, medical, food and packaging industries. Advantages of laser welding are the absence of direct contact between the energy source and the heated surfaces and the ability to vary the intensity of heating by adjusting the temperature of the radiator and the distance to it. Currently, the most common laser welding technology is the transmission (permeable) method for overhead joints, which uses the effect of transparency of some polymeric materials for the laser beam. The transmission welding of low-power short-focus laser of polyethylene films of different types is carried out in the work. Knee welding was performed using a diode laser with a power of 1 W with a wavelength of 532 nm (green color of the visible light range). The laser on the clamping platform was moved along the connection line by means of a mechanical trolley. During welding, a 0.8–1 mm wide seam was formed and a slight convexity to the outside due to the expansion of the molten polymer material. Experimental studies of the influence of the main parameters of the laser welding process on the morphology of joints of polyethylene films of grades T and H. It is shown that welding laser films in the range of 0.015–0.1 mm does not require expensive laser equipment. A laser with a power of no more than 1 watt is enough to make a good connection. The quality of the welded joints of the films was evaluated by visual inspection, examination under a microscope and tear tests. Studies of experimental welds have shown their strength at the level of the base material.
URI/URL: http://elartu.tntu.edu.ua/handle/lib/39568
ISSN: 2522-4433
Copyright owner: © Ternopil Ivan Puluj National Technical University, 2021
URL for reference material: https://doi.org/10.1155/2018/6378782
https://doi.org/10.1002/9783527636969
https://doi.org/10.37434/as2020.09.07
References (Ukraine): 1. Каллистер У. Д. мл. Материаловедение: от технологии к применению (металлы, керамики, полимеры) / пер. с англ. под ред. А. Я. Малкина. СПб.: Научные основы и технологии, 2015. 896 с.
2. Buketov A., Brailo M., Yakushchenko S., Sapronova A. Development of Epoxy-Polyester Composite with Improved Thermophysical Properties for Restoration of Details of Sea and River Transport. Advances in Materials Science and Engineering. 2018. Vol. 2018. Article ID 6378782. 6 pages. DOI: https://doi.org/10.1155/2018/6378782
3. Klein R. Laser welding of plastics. Wiley-VCH: Verlag GmbH & Co, 2011. 256 p. DOI: https://doi.org/10.1002/9783527636969
4. Acherjee B., Kuar A., Misra D., Mitra S. Laser transmission welding of thermoplastics:An overview of experimental findings – process, development and applications. Journal of Manufacturing Technology Research. 2011. No. 3. P. 211–236.
5. Кораб М. Г., Юрженко М. В., Ващук А. В., Менжерес М. Г. Зварювання полімерних плівок лазерами малої потужності. Автоматичне зварювання. 2020. № 9. С. 51–53. DOI: https://doi.org/10.37434/as2020.09.07
6. Міждержавний стандарт ГОСТ 10354-82 Плівка поліетиленова. Технічні умови. Втратив чинність 01.01.2019.
7. Звелто О. Принципы лазеров. 4-е изд, СПб.: «Лань». 2008. 720 с.
References (International): 1. Callister W. D. Jr. Materials science: from technology to application (metals, ceramics, polymers) / trans. from English. ed. AND I. Malkina. SPb.: Scientific bases and technologies, 2015. 896 p.
2. Buketov A., Brailo M., Yakushchenko S., Sapronova A. Development of Epoxy-Polyester Composite with Improved Thermophysical Properties for Restoration of Details of Sea and River Transport. Advances in Materials Science and Engineering. 2018. Vol. 2018. Article ID 6378782. 6 pages. DOI: https://doi.org/10.1155/2018/6378782
3. Klein R. Laser welding of plastics. Wiley-VCH: Verlag GmbH & Co, 2011. 256 p. DOI: https://doi.org/10.1002/9783527636969
4. Acherjee B., Kuar A., Misra D., Mitra S. Laser transmission welding of thermoplastics: An overview of experimental findings – process, development and applications. Journal of Manufacturing Technology Research. 2011. No. 3. P. 211–236.
5. Korab M. G., Yurzhenko M. V., Vashchuk A. V., Menzheres M. G. Welding of polymer films by low-power lasers. Automatic welding. 2020. No. 9. P. 51–53. DOI: https://doi.org/10.37434/as2020.09.07
6. Interstate standard GOST 10354-82 Polyethylene film. Specifications. It expired on January 1, 2019.
7. Zvelto O. Principles of lasers. 4th ed., St. Petersburg: “Lan”. 2008. 720 p.
Content type: Article
Collection(s) :Вісник ТНТУ, 2021, № 4 (104)



Tous les documents dans DSpace sont protégés par copyright, avec tous droits réservés.