Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: http://elartu.tntu.edu.ua/handle/lib/39132

Назва: Вплив швидкості приросту тиску газу при вакуумно-компресійному спіканні на структуру і властивості твердого сплаву ВК6М
Інші назви: The effect of the gas pressure increase rate during vacuumcompression sintering on the structure and properties of fine grain WC-6Co hard alloy
Автори: Прокопів, М.
Харченко, О.
Крамар, Галина Михайлівна
Бодрова, Л.
Ущаповський, Ю.
Кисла, Г.
Prokopiv, M. M.
Kharchenko, O. V.
Kramar, H. M.
Bodrova, L. G.
Ushchapovskii, Yu. P.
Kysla, H. P.
Приналежність: Інститут надтвердих матеріалів ім. В.М. Бакуля НАН України, Україна
Тернопільський національний технічний університет імені Івана Пулюя, Україна 3ПрАТ "ПлазмаТек", Україна
V. Bakul Institute for Superhard Materials, Ukraine
Ternopil Ivan Puluj National Technical University, Ukraine
Private joint-stock company " PlasmaTec", Ukraine
Бібліографічний опис: Вплив швидкості приросту тиску газу при вакуумно-компресійному спіканні на структуру і властивості твердого сплаву ВК6М / М. Прокопів, О. Харченко, Г. Крамар, Л. Бодрова, Ю. Ущаповський, Г. Кисла // Матеріали Міжнародої науково-технічної конференції „Міцність і довговічність сучасних матеріалів та конструкцій“, 10-11 листопада 2022 року. — Т. : ФОП Паляниця В. А., 2022. — С. 145–147. — (Нові та сучасні матеріали та технології).
Bibliographic description: Prokopiv M. M., Kharchenko O. V., Kramar H. M., Bodrova L. G., Ushchapovskii Yu. P., Kysla H. P. (2022) Vplyv shvydkosti pryrostu tysku hazu pry vakuumno-kompresiinomu spikanni na strukturu i vlastyvosti tverdoho splavu VK6M [The effect of the gas pressure increase rate during vacuumcompression sintering on the structure and properties of fine grain WC-6Co hard alloy]. Proceedings of the International scientific and technical conference "Strength and durability of modern materials and constructions" (Tern., November 10-11, 2022), pp. 145-147 [in Ukrainian].
Є частиною видання: Праці конференції Міжнародної науково-технічної конференції присвяченої 70-річчю від дня народженнячлен-кореспондента НАН України, проф. Яснія Петра Володимировича „Міцність і довговічність сучасних матеріалів та конструкцій“, 2022
Proceedings of the International scientific and technical conference dedicated to the 70th anniversary from the day of birth of Corresponding member of the National Academy of Sciences of Ukraine, professor Yasniy Petro, 2022
Конференція/захід: Міжнародна науково-технічна конференція присвячена 70-річчю від дня народженнячлен-кореспондента НАН України, проф. Яснія Петра Володимировича „Міцність і довговічність сучасних матеріалів та конструкцій“
Журнал/збірник: Праці конференції Міжнародної науково-технічної конференції присвяченої 70-річчю від дня народженнячлен-кореспондента НАН України, проф. Яснія Петра Володимировича „Міцність і довговічність сучасних матеріалів та конструкцій“
Дата публікації: 10-лис-2022
Дата внесення: 5-гру-2022
Видавництво: ФОП Паляниця В. А.
PE Palianytsia V. A.
Місце видання, проведення: Тернопіль
Ternopil
Часове охоплення: 10-11 листопада 2022 року
November 10-11, 2022
УДК: 621.762.3
Кількість сторінок: 3
Діапазон сторінок: 145-147
Початкова сторінка: 145
Кінцева сторінка: 147
Короткий огляд (реферат): The effect of 0.08, 0.2, and 0.5 MPa/min gas pressure increase rates up to 5.0 MPa during vacuum-compression sintering on the structure and properties of fine grain WC-6Co hard alloy was studied. A positive effect of the gas pressure increase rate increase on the transverse rupture strength and service stability during turning of Steel SAE 1045 due to thereduction of residual microporosity and the intensity of gas desorption was determined
URI (Уніфікований ідентифікатор ресурсу): http://elartu.tntu.edu.ua/handle/lib/39132
ISBN: 978-617-7875-43-6
Власник авторського права: © Тернопільський національний технічний університет імені Івана Пулюя, 2022
Перелік літератури: 1.Kolaska H., Dreyer K., Schaaf G. Use of the combined sintering HIP process in the production of hard metals and ceramic // pmi. – 1989. – V. 21, № 1. – P. 22 – 28.
2. Bauer R., Schulten R. Retrospection on the development of Sbmter HIP furnaces. // Modern Hardmetals Proc.:.– К.: V.N. Bakul ISM NAS Ukraine, 2008.– P. 133 ‒ 141.
3. Chen H., Zwang D., Li Y., Chen J. High performance sinter – HIP for hard metals // Proc. of the 15 Plansee seminar, Reutte, Austria. - Plansee, 2001, Reutte.– V.2. - P. 180 – 188.
4. Missol W., Karwata T., Krajzel J., Bujok J. Comparison of the properties of ultrafine and conventional hardmetals / Proc. of the 1998 PM World Congress, V 4, Spain, October 18 – 22, 1998. - P. 152 – 157.
5. Прокопів М.М., Харченко О.В., Сердюк Ю.Д. Структура твердих сплавів групи WС–Со після спікання у газовому середовищі // Сверхтвердые материалы. – 2010. – № 2 – C. 96–98.
6. Прокопів М.М., Бондаренко В.П., Харченко О.В., Цап И.В. Вплив умов спікання сплаву ВК10 ОМ на кінетику й механізми зносу його в умовах чистового й ударного точіння // Матер. Наук.-техн. конф. «Інтерпартнер 2008». – 2008. – С. 312–327.
7. Kramar H. Thermal compression treatment of WC-Co and TiC-VC-NbC-WC-Ni-Cr Hard alloys /H. M. Kramar, L. H. Bodrova, M. M. Prokopiv, S. Yu. Marynenko // Proc. of the 18 Plansee seminar, Reutte, Austria. - Plansee, 2013, Reutte. - P. 146-152.
8. Loed K. B. The kinetic theory of gases. Dover Publications, NewYork, 1961.
References: 1.Kolaska H., Dreyer K., Schaaf G. Use of the combined sintering HIP process in the production of hard metals and ceramic, pmi, 1989, V. 21, No 1, P. 22 – 28.
2. Bauer R., Schulten R. Retrospection on the development of Sbmter HIP furnaces., Modern Hardmetals Proc.:, K., V.N. Bakul ISM NAS Ukraine, 2008, P. 133 ‒ 141.
3. Chen H., Zwang D., Li Y., Chen J. High performance sinter – HIP for hard metals, Proc. of the 15 Plansee seminar, Reutte, Austria, Plansee, 2001, Reutte, V.2, P. 180 – 188.
4. Missol W., Karwata T., Krajzel J., Bujok J. Comparison of the properties of ultrafine and conventional hardmetals, Proc. of the 1998 PM World Congress, V 4, Spain, October 18 – 22, 1998, P. 152 – 157.
5. Prokopiv M.M., Kharchenko O.V., Serdiuk Yu.D. Struktura tverdykh splaviv hrupy WS–So pislia spikannia u hazovomu seredovyshchi, Sverkhtverdye materyaly, 2010, No 2 – P. 96–98.
6. Prokopiv M.M., Bondarenko V.P., Kharchenko O.V., Tsap Y.V. Vplyv umov spikannia splavu VK10 OM na kinetyku y mekhanizmy znosu yoho v umovakh chystovoho y udarnoho tochinnia, Mater. Nauk.-tekhn. konf. "Interpartner 2008", 2008, P. 312–327.
7. Kramar H. Thermal compression treatment of WC-Co and TiC-VC-NbC-WC-Ni-Cr Hard alloys /H. M. Kramar, L. H. Bodrova, M. M. Prokopiv, S. Yu. Marynenko, Proc. of the 18 Plansee seminar, Reutte, Austria, Plansee, 2013, Reutte, P. 146-152.
8. Loed K. B. The kinetic theory of gases. Dover Publications, NewYork, 1961.
Тип вмісту: Conference Abstract
Розташовується у зібраннях:Міжнародна науково-технічна конференція „Міцність і довговічність сучасних матеріалів та конструкцій“ присвячена 70-річчю від дня народження член-кореспондента НАН України, проф. Яснія Петра Володимировича (2022)



Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.