Palun kasuta seda identifikaatorit viitamiseks ja linkimiseks:
http://elartu.tntu.edu.ua/handle/lib/28697
Pealkiri: | Dynamic analysis of gas flow through the ICE ring seal |
Autor: | Zarenbin, Volodymyr Kolesnikova, Tatiana Sakno, Olha Bohomolov, Vitali |
Affiliation: | Prydniprovs’ka State Academy of Civil Engineering and Architecture, 24A Chernyshevsky Street, 49600, Dnipro, Ukraine; Corresponding author: filisof@yahoo.com |
Bibliographic description (Ukraine): | Dynamic analysis of gas flow through the ICE ring seal / Volodymyr Zarenbin, Tatiana Kolesnikova, Olha Sakno, Vitali Bohomolov // Proceedings of ICCPT 2019, May 28-29, 2019. — Tern. : TNTU, Scientific Publishing House “SciView”, 2019. — P. 92–102. |
Bibliographic description (International): | Zarenbin V., Kolesnikova T., Sakno O., Bohomolov V. (2019) Dynamic analysis of gas flow through the ICE ring seal. Proceedings of ICCPT 2019 (Tern., May 28-29, 2019), pp. 92-102. |
Is part of: | Матеріали Міжнародної науково-технічної конференції „Актуальні проблеми транспорту“, 2019 Proceedings of the 1-st International Scientific Conference "Current Problems of Transport", 2019 |
Conference/Event: | Міжнародна науково-технічна конференція „Актуальні проблеми транспорту“ ICCPT 2019 |
Journal/Collection: | Матеріали Міжнародної науково-технічної конференції „Актуальні проблеми транспорту“ |
Ilmumisaasta: | 28-mai-2019 |
Date of entry: | 9-juu-2019 |
Kirjastaja: | Scientific Publishing House “SciView” TNTU |
Place of the edition/event: | Тернопіль Ternopil |
Temporal Coverage: | 28-29 травня 2019 року May 28-29, 2019 |
Number of pages: | 11 |
Page range: | 92-102 |
Start page: | 92 |
End page: | 102 |
URI: | http://elartu.tntu.edu.ua/handle/lib/28697 |
ISBN: | 978-966-305-101-7 |
Copyright owner: | © Scientific Publishing House “SciView”, 2019 © Ternopil Ivan Puluj National Technical University, 2019 |
URL for reference material: | https://doi.org/10.1016/j.triboint.2018.07.002 https://doi.org/10.1016/j.applthermaleng.2017.12.111 https://doi.org/10.1016/j.triboint.2016.09.017 https://doi.org/10.1016/j.triboint.2016.08.021 https://doi.org/10.1016/j.triboint.2016.04.009 https://doi.org/10.1016/j.triboint.2016.03.030 |
References (International): | 1. Abramchuk, F.; Grytsyuk, O.; Prokhorenko, A. et al. Specifying the procedure for designing the elements of the crankshaft system for a small high-speed diesel engine. Eastern-European Journal of Enterprise Technologies 2018, 3/1(93), 60-66. DOI: 10.15587/1729-4061.2018.133353. 2. Akimov, O.G.; Gusau, V.I.; Marchenko, A.P. Overview of computer-integrated systems and technologies for manufacturing pistons of internal combustion engines. East European Journal of Advanced Technologies 2015, 6/1(78), 35-42. DOI: 10.15587/1729-4061.2015.56318. 3. Iwnicki, S. Handbook of Vehicle Dynamics. (Powertrain and Transport). London, New York: Taylor & Francis Group. LLC, 2006. 4. Tomazic, D. Emissions control. Engine Technology International (ETI) 01, 2005. 5. Postrzednik, S.; Żmudka, Z.; Przybyła, G. Influence of the exhaust gas recirculation on the oxygen contents and its excess ratio in the engine combustion chamber. Journal of KONES. Powertrain and Transport 2013, 20(3), 315-321. 6. Ma, W.; Biboulet, N.; Lubrecht, A.A. Performance evolution of a worn piston ring. Tribology International 2018, 126, 317-323. https //doi.org/10.1016/j.triboint.2018.05.028. 7. Notay, R.S.; Priest, M.; Fox, M.F. The influence of lubricant degradation on measured piston ring film thickness in a fired gasoline reciprocating engine. Tribology International 2019, 129, 112-123. https://doi.org/10.1016/j.triboint.2018.07.002. 8. Mohamed, E.S. Performance analysis and condition monitoring of ICE piston-ring based on combustion and thermal characteristics. Applied Thermal Engineering 2018, 132, 824-840. https://doi.org/10.1016/j.applthermaleng.2017.12.111. 9. Lyubarskyy, P.; Bartel, D. 2D CFD-model of the piston assembly in a diesel engine for the analysis of piston ring dynamics, mass transport and friction. Tribology International 2016, 104, 352-368. https://doi.org/10.1016/j.triboint.2016.09.017. 10. Söderfjäll, M.; Almqvist, A.; Larsson, R. Component test for simulation of piston ring – Cylinder liner friction at realistic speeds. Tribology International 2016, 104, 57-63. https://doi.org/10.1016/j.triboint.2016.08.021. 11. Shen, C.; Khonsari, M.M. The effect of laser machined pockets on the lubrication of piston ring prototypes. Tribology International 2016, 101, 273-283. https://doi.org/10.1016/j.triboint.2016.04.009. 12. Usman, A.; Park, C.W. Optimizing the tribological performance of textured piston ring–liner contact for reduced frictional losses in SI engine: Warm operating conditions. Tribology International 2016, 99, 224-236. https://doi.org/10.1016/j.triboint.2016.03.030. 13. Wong, V.W.; Tung, Simon C. Overview of automotive engine friction and reduction trends–effects of surface, material, and lubricant-additive technologies. Friction, 2016, 4(1), 1-28. |
Content type: | Conference Abstract |
Asub kollektsiooni(de)s: | Міжнародна науково-технічна конференція „Актуальні проблеми транспорту ICCPT“ (2019) |
Failid selles objektis:
Fail | Kirjeldus | Suurus | Formaat | |
---|---|---|---|---|
ICCPT_2019_Zarenbin_V-Dynamic_analysis_of_gas_92-102.pdf | 5,54 MB | Adobe PDF | Vaata/Ava | |
ICCPT_2019_Zarenbin_V-Dynamic_analysis_of_gas_92-102.djvu | 575,59 kB | DjVu | Vaata/Ava | |
ICCPT_2019_Zarenbin_V-Dynamic_analysis_of_gas_92-102__COVER.png | 1,03 MB | image/png | Vaata/Ava |
Kõik teosed on Dspaces autoriõiguste kaitse all.