Bu öğeden alıntı yapmak, öğeye bağlanmak için bu tanımlayıcıyı kullanınız:
http://elartu.tntu.edu.ua/handle/lib/20879
Başlık: | Моделювання деформування гладких зразків і зразків з тріщинами за динамічної повзучості |
Diğer Başlıklar: | Modelling of deformation of smooth specimen and specimen with crack at dynamic creep |
Yazarlar: | Федак, Сергій Ігнатович Ясній, Петро Володимирович Гладьо, Володимир Богданович Шульган, Ігор Володимирович |
Affiliation: | ТНТУ імені Івна Пулюя |
Bibliographic description (Ukraine): | Запропоновано методику розрахунку приросту розкриття вершини тріщини на основі ЕМР методу, з урахуванням пошкоджуваності матеріалу в умовах статичної та динамічної повзучості, що враховує коефіцієнт форми та питому частку включень гетерогенного матеріалу. Результати отримані ЕМР методом задовільно узгоджуються із запропонованою скінченно-елементною моделлю. |
Bibliographic description (International): | The influence of shape ratio and density of inclusions on creep, dynamic creep and crack tip opening displacement of AlMg6 alloy are studied by the finite element method. The effect of the maximum stresses on the main characteristics of deformation and material damage is revealed. The influence of the cyclic component on the fracture of inclusions and creep rupture decreases with increasing maximum stress. The calculated creep strain is in satisfactory agreement with that obtained experimentally |
Conference/Event: | Міжнародна науково-технічна конференція «Міцність матеріалів та елементів конструкцій». 28-30 вересня 2010 р.. Київ, Україна. |
Yayın Tarihi: | 28-Eyl-2010 |
Date of entry: | 2-Haz-2017 |
Country (code): | UA |
Place of the edition/event: | Київ |
Anahtar kelimeler: | механіка руйнування динамічна повзучість |
Number of pages: | С. 214-215 |
Özet: | The influence of shape ratio and density of inclusions on creep, dynamic creep and crack tip opening displacement of AlMg6 alloy are studied by the finite element method. The effect of the maximum stresses on the main characteristics of deformation and material damage is revealed. The influence of the cyclic component on the fracture of inclusions and creep rupture decreases with increasing maximum stress. The calculated creep strain is in satisfactory agreement with that obtained experimentally. |
URI: | http://elartu.tntu.edu.ua/handle/lib/20879 |
Content type: | Conference Abstract |
Koleksiyonlarda Görünür: | Наукова діяльність Яснія П. В. Матеріали інших конференцій, семінарів, читань |
Bu öğenin dosyaları:
Dosya | Açıklama | Boyut | Biçim | |
---|---|---|---|---|
-Kiev-2010.pdf | 215,85 kB | Adobe PDF | Göster/Aç |
DSpace'deki bütün öğeler, aksi belirtilmedikçe, tüm hakları saklı tutulmak şartıyla telif hakkı ile korunmaktadır.