Utilize este identificador para referenciar este registo:
http://elartu.tntu.edu.ua/handle/123456789/16763
Título: | Capability of load-time history reconstruction and fatigue crack growth rate estimation for 2024-T3 aluminium alloy on the basis of fractographic analysis |
Autor: | Kocańda, D. Torzewski, J. |
Affiliation: | Military University of Technology , Warsaw, Poland |
Bibliographic description (Ukraine): | Kocańda D. Capability of load-time history reconstruction and fatigue crack growth rate estimation for 2024-T3 aluminium alloy on the basis of fractographic analysis / D. Kocańda, J. Torzewski // Механічна втома металів. Праці 13-го міжнародного колоквіуму (МВМ-2006), 25-28 вересня 2006 року — Т. : ТДТУ, 2006 — С. 42-48. — (Пленарні доповіді). |
Bibliographic description (International): | Kocańda D., Torzewski J. (2006) Capability of load-time history reconstruction and fatigue crack growth rate estimation for 2024-T3 aluminium alloy on the basis of fractographic analysis. Mechanical Fatigue of Metals: Proceeding of the 13-th International Colloquium (MFM) (Tern., 25-28 September 2006), pp. 42-48 [in English]. |
Is part of: | ⅩⅢ міжнародний колоквіум „Механічна втома металів“ ⅩⅢ Internation Colloquium "Mechanical fatigue of metals" |
Conference/Event: | 13-ий міжнародний колоквіум (МВМ-2006) „Механічна втома металів“ |
Journal/Collection: | ⅩⅢ міжнародний колоквіум „Механічна втома металів“ |
Data: | 25-Set-2006 |
Date of entry: | 5-Jun-2016 |
Editora: | ТДТУ TDTU |
Place of the edition/event: | Україна, Тернопіль Ukraine, Ternopil |
Temporal Coverage: | 25-28 вересня 2006 року 25-28 September 2006 |
Number of pages: | 7 |
Page range: | 42-48 |
Start page: | 42 |
End page: | 48 |
Resumo: | The subject of the paper is the considerations of the capability of load-time history reconstruction for the component under variable amplitude loading and fatigue crack growth rate estimation for the 2024-T3 Alclad aluminium alloy on the basis of microfracture analysis. For this goal three variable amplitude (VA) load sequences with multiple overloads and differing from the level of load sequence complexity were applied. These loads are employed when simulating the fatigue behaviour of aeronautical alloys. To reveal the load sequence effect on crack growth behaviour the microfracture analysis were provided by means of TEM microscope. |
URI: | http://elartu.tntu.edu.ua/handle/123456789/16763 |
ISBN: | 966-305-027-6 |
Copyright owner: | © Тернопільський державний технічний університет імені Івана Пулюя |
References (Ukraine): | 1. Ivanova V., Shaniavsky A. Quantitative fractography. Metallurgy Press, 1988 (in Russian). 2. Schijve J.: Fatigue of Structures and Materials. Kluwer Academic Publishers, 2001. 3. Kermanidis A.T., Pantelakis S.G. Fatigue crack growth analysis of 2024-T3 aluminium specimens under aircraft service spectra. Fatigue Fract. Engng Mater. Struct., 2001, Vol. 24, p. 699-710. 4. Ranganathan N. Certain aspects of variable amplitude fatigue. Proc. Eighth Int. Fatigue Congress Fatigue 2002, Sweden, Ed.: A. Blom, Vol. 1/5, pp. 613-621, 2002. 5. Brockenbrough J.R., et al. Crack growth prediction methods for spectrum loading to support fatigue and durability damage tolerance evaluation. ICAF 2003, Switzerland, 2003, p. 14. 6. Kocańda D., Kocańda S., Torzewski J. Reconstruction of fatigue crack growth rate for 2024-T3 aluminium alloy sheet on the basis of fractographic analysis. Archive Mech. Engng, Vol. LI, No 3, pp. 361-376, 2004. |
References (International): | 1. Ivanova V., Shaniavsky A. Quantitative fractography. Metallurgy Press, 1988 (in Russian). 2. Schijve J., Fatigue of Structures and Materials. Kluwer Academic Publishers, 2001. 3. Kermanidis A.T., Pantelakis S.G. Fatigue crack growth analysis of 2024-T3 aluminium specimens under aircraft service spectra. Fatigue Fract. Engng Mater. Struct., 2001, Vol. 24, p. 699-710. 4. Ranganathan N. Certain aspects of variable amplitude fatigue. Proc. Eighth Int. Fatigue Congress Fatigue 2002, Sweden, Ed., A. Blom, Vol. 1/5, pp. 613-621, 2002. 5. Brockenbrough J.R., et al. Crack growth prediction methods for spectrum loading to support fatigue and durability damage tolerance evaluation. ICAF 2003, Switzerland, 2003, p. 14. 6. Kocańda D., Kocańda S., Torzewski J. Reconstruction of fatigue crack growth rate for 2024-T3 aluminium alloy sheet on the basis of fractographic analysis. Archive Mech. Engng, Vol. LI, No 3, pp. 361-376, 2004. |
Content type: | Article |
Aparece nas colecções: | 13-ий міжнародний колоквіум (МВМ-2006) „Механічна втома металів“ (2006) |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
Conf_2006_Kocanda_D-Capability_of_load_time_history_42-48.pdf | 4,18 MB | Adobe PDF | Ver/Abrir | |
Conf_2006_Kocanda_D-Capability_of_load_time_history_42-48.djvu | 536,57 kB | DjVu | Ver/Abrir | |
Conf_2006_Kocanda_D-Capability_of_load_time_history_42-48__COVER.jpg | 247,03 kB | JPEG | Ver/Abrir |
Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.