Ezzel az azonosítóval hivatkozhat erre a dokumentumra forrásmegjelölésben vagy hiperhivatkozás esetén: http://elartu.tntu.edu.ua/handle/123456789/1467

Título : Щодо питання математичного моделювання інженерних розрахунків напружено-деформованого стану робочої камери для отримання флюїдів
Otros títulos : To question of mathematical simulation in engineering calculations of the tense-deformed state of working chamber for production of fluid
Autor : Сукманов, В.
Петрова, Ю.
Русанова, О.
Лаговский, І.
Sukmanov, V.
Petrova, J.
Rusanova, O.
Lagovsky, I.
Bibliographic description (Ukraine): Щодо питання математичного моделювання інженерних розрахунків напружено-деформованого стану робочої камери для отримання флюїдів / Сукманов В., Петрова Ю., Русанова О., Лаговский І. // Вісник ТНТУ. — 2011. — Спецвипуск — частина 2. — С.157-164. — (механіка та матеріалознавство).
Fecha de publicación : 2011
Date of entry: 23-nov-2011
Editorial : Тернопільський національний технічний університет ім. Івана Пулюя
Place of the edition/event: Тернопіль, Україна
UDC: 544.344
664
Palabras clave : флюїдні технології
ANSYS
напружено-деформований стан
fluid technologies
ANSYS
tense-deformed state
Resumen : Розроблено методику створення розрахункової моделі робочої камери флюїдних технологій для обліку температурних напружень у програмі ANSYS. Проведено верифікацію отриманої моделі за формулами Ляме.
In the article the method of creation of calculation model of working chamber of fluid technologies is developed for the account of temperature tensions in the program ANSYS. Verification of the got model is conducted on the formulas of Lyame.
URI : http://elartu.tntu.edu.ua/handle/123456789/1467
ISSN : 1727-7108
Copyright owner: © „Вісник Тернопільського національного технічного університету“
Publications status : Опубліковано раніше
Content type: Article
Aparece en las colecciones: Вісник ТНТУ, 2011. Спецвипуск, частина 2



Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.