1. ELARTU — Інституційний репозитарій ТНТУ імені Івана Пулюя
  2. Факультет інженерії машин, споруд та технологій (ФМТ)
  3. Кафедра інжинірингу машинобудівних технологій (МТ)
  4. Наукові публікації працівників кафедри інжинірингу машинобудівних технологій
Empreu aquest identificador per citar o enllaçar aquest ítem: http://elartu.tntu.edu.ua/handle/lib/42878

Registre complet de metadades
Camp DCValorLengua/Idioma
dc.contributor.authorVasylkiv, Vasyl-
dc.contributor.authorRadyk, Dmytro-
dc.contributor.authorStashkiv, Mykola-
dc.contributor.authorDanylchenko, Larysa-
dc.contributor.authorВасильків, Василь Васильович-
dc.contributor.authorРадик, Дмитро Леонідович-
dc.contributor.authorСташків, Микола Ярославович-
dc.contributor.authorДанильченко, Лариса Миколаївна-
dc.date.accessioned2023-11-27T10:56:15Z-
dc.date.available2023-11-27T10:56:15Z-
dc.date.issued2023-10-
dc.date.submitted2023-04-
dc.identifier.citationInfluence of the Design Parameters of a Screw Feeder Loading Mechanism on the Torque Value of the Drive Shaft. Vasyl Vasylkiv, Dmytro Radyk, Mykola Stashkiv, Larysa Danylchenko. Communications - Scientific Letters of the University of Zilina. Mechanical Engineering in Transport . - Slovakia .Volume 25, issue 4, 2023. B301-B314. ISSN: 1335-4205. DOI: https://doi.org/10.26552/com.C.2023.068uk_UA
dc.identifier.issn1335-4205-
dc.identifier.issn2585-7878-
dc.identifier.urihttp://elartu.tntu.edu.ua/handle/lib/42878-
dc.description.abstractThe processes of material capture and movement in a screw feeder are characterized by significant loads due to the pressure of a vertical load column, which creates additional resistance to the movement of the material, overcoming which leads to unproductive energy consumption. The paper aims to study the influence of the design parameters of the loading mechanism on the torque on the drive shaft of a screw feeder. The results of experimental studies and computer simulation of the design parameters of the loading mechanism relation (the length of the loading zone, the inclination angle of the rotating wall of the loading nozzle, its displacement value relative to the vertical axis of the auger operating part, and the height of the material in the loading nozzle), to the torque value on the drive shaft of the screw feeder for transportation of bulk cargo, are presented in this paper.uk_UA
dc.format.extentB301-B314-
dc.language.isoenuk_UA
dc.publisherCommunications - Scientific Letters of the University of Zilinauk_UA
dc.relation.urihttps://komunikacie.uniza.sk/contents/csl/2023/04.pdfuk_UA
dc.relation.urihttps://komunikacie.uniza.sk/magno/csl/2023/mn4.phpuk_UA
dc.relation.urihttps://komunikacie.uniza.sk/artkey/csl-202304-0004_influence-of-the-design-parameters-of-a-screw-feeder-loading-mechanism-on-the-torque-value-of-the-drive-shaft.phpuk_UA
dc.relation.urihttps://komunikacie.uniza.sk/pdfs/csl/2023/04/04.pdfuk_UA
dc.relation.urihttps://www.scopus.com/authid/detail.uri?authorId=58698210400uk_UA
dc.relation.urihttps://www.ceeol.com/search/article-detail?id=1191182uk_UA
dc.relation.urihttps://orcid.org/0000-0003-4345-9770uk_UA
dc.relation.urihttps://www.scopus.com/authid/detail.uri?authorId=58698210400uk_UA
dc.subjectscrew feederuk_UA
dc.subjectbulk materialuk_UA
dc.subjecttorqueuk_UA
dc.subjectloading mechanismuk_UA
dc.subjectthe length of the loading zone displacement of the loading nozzleuk_UA
dc.titleInfluence of the Design Parameters of a Screw Feeder Loading Mechanism on the Torque Value of the Drive Shaftuk_UA
dc.typeArticleuk_UA
dc.rights.holder© Vasylkiv Vasyl, Radyk Dmytro, Stashkiv Mykola, Danylchenko Larysa, 2023uk_UA
dc.coverage.placenameCommunications - Scientific Letters of the University of Zilinauk_UA
dc.format.pages14-
dc.relation.references1. METCALF, J. R. The mechanics of the screw feeder. Proceedings of the Institution of Mechanical Engineers [online]. 1965, 180(1), p. 131-146. ISSN 0020-3483. Available from: https://doi.org/10.1243/PIME_PROC_1965_180_015_02uk_UA
dc.relation.references2. MINGLANI, D., SHARMA, A., PANDEY, H., DAYAL, R., JOSHI, J. B., SUBRAMANIAM, S. A review of granular flow in screw feeders and conveyors. Powder Technology [online]. 2020, 366, p. 369-381. ISSN 0032-5910, eISSN 1873-328X. Available from: https://doi.org/10.1016/j.powtec.2020.02.066uk_UA
dc.relation.references3. ROBERTS, A. W., MANJUNATH, K. S., MCBRIDE, W. The mechanics of screw feeder performance for bulk solids flow control. In: 4th International Conference on Bulk Materials, Storage, Handling and Transportation: 7th International Symposium on Freight Pipelines: proceedings [online] [accessed 2023-03-27]. Preprints of papers. Barton: ACT. 1992. ISBN 0858255545, p. 333-338. Available from: https://search.informit.org/doi/10.3316/ informit.388068299607697uk_UA
dc.relation.references4. PATINGE, S., PRASAD, K. Effect of parameters on the screw feeder performance using discrete element method. Asian Journal of Convergence in Technology [online]. 2016, 2(3), p. 22-23 [accessed 2023-03-27]. ISSN 2350-1146. Available from: https://asianssr.org/index.php/ajct/article/view/157/216uk_UA
dc.relation.references5. WANG, Y, LI, T, MUZZIO, F. J., GLASSER, B. J. Predicting feeder performance based on material flow properties. Powder Technology [online], 2017, 308, p. 135-148. ISSN 1873-328X. Available from: https://doi.org/10.1016/j.powtec.2016.12.010uk_UA
dc.relation.references6. VASYLKIV, V., PYLYPETS, M., DANYLCHENKO, L., RADYK, D. Formalized description and synthesis of schemes for shaping helical flights and auger billets based on the componentic methods. Scientific Journal of TNTU [online], 2021, 104(4), p. 44-57. ISSN 2522-4433. Available from: https://doi.org/10.33108/visnyk_ tntu2021.04.044uk_UA
dc.relation.references7. VASYLKIV, V., PYLYPETS, M., DANYLCHENKO, L., RADYK, D. Investigation of deflections of winded screw flights and auger billets in the processes of their manufacture. Scientific Journal of TNTU [online]. 2021, 104(4), p. 33-43. ISSN 2522-4433. Available from: https://doi.org/10.33108/visnyk_tntu2021.04.033uk_UA
dc.relation.references8. ROBERTS, A. W. Predicting the volumetric and torque characteristics of screw feeders. Bulk Solids Handling. 1996, 16(2), p. 233-244. ISSN 0173-9980uk_UA
dc.relation.references9. YU, Y., ARNOLD, P. C. Theoretical modelling of torque requirements for single screw feeders. Powder Technology [online], 1997, 93(2), p. 151-162. ISSN 1873-328X. Available from: https://doi.org/10.1016/S0032-5910(97)03265-8uk_UA
dc.relation.references10. PATERWITZ, M., GERLING, S., SCHEMBECKER, G. Challenges in tracing material flow passing a loss-inweight feeder in continuous manufacturing processes. International Journal of Pharmaceutics [online]. 2021, 612, 121304 [accessed 2022-01-25]. ISSN 2229-5518. Available from: https://doi.org/10.1016/j.ijpharm.2021.121304uk_UA
dc.relation.references11. XU, X., SHEN, CH., LI, F., WANG, L. Design and experimental study of equal-area variable-pitch screw structure for wheat flour. INMATEN Agricultural Engineering [online]. 2021, 64, p. 423-436. ISSN 2068-4215, eISSN 2068-2239. Available from: https://doi.org/10.35633/inmateh-64-42uk_UA
dc.relation.references12. ANSI/CEMA Standard No. 350. Screw conveyors for bulk materials. 5th edition. 2019.uk_UA
dc.relation.references13. BATES, L. Entrainment patterns of screw hopper dischargers, transaction of the ASME. Journal of Engineering for Industry [online]. 1969, 91(2), p. 295-302. ISSN 1087-1357, eISSN 1528-8935. Available from: https://doi.org/10.1115/1.3591561uk_UA
dc.relation.references14. BATES, L. Guide to the design, selection, and application of screw feeders. London: Wiley and Sons Ltd, 2008. ISBN 9781860582851.uk_UA
dc.relation.references15. BORTOLAMASI, M., FOTTNER, J. Design and sizing of screw feeders. In: International Congress for Particle Technology PARTEC 2001: proceedings [online] [accessed 2023-03-27]. 2001. p. 27-29. Available from: https://mediatum.ub.tum.de/doc/1188322/fml_20131230_514_export.pdfuk_UA
dc.relation.references16. KULKARNI, U. G., SHAH, H. P., SANAS, S. M., SHETE, A. P., KEKAN, G. H. Design and development of screw feeder. International Journal of Advance Research, Ideas and Innovations in Technology [online]. 2017, 3(2), p. 1099-1102 [accessed 2023-03-27]. ISSN 2454-132X. Available from: https://www.ijariit.com/manuscripts/v3i2/ V3I2-1547.pdfuk_UA
dc.relation.references17. LIU, M., NING, W., XIAOMEI, C., YING, S., JIANGPENG, L. Design of feed screw conveyor. Journal of Physics: Conference Series [online]. 2020, 1601, 062005. ISSN 1742-6588, eISSN 1742-6596. Available from: http://dx.doi. org/10.1088/1742-6596/1601/6/062005uk_UA
dc.relation.references18. GRIMARD, J., DEWASME, L., WOUWER, A. V. Dynamic modeling and model-based control of a twin screw extruder. In: 25th Mediterranean Conference on Control and Automation (MED): proceedings [online]. 2017. ISSN 2473-3504, p. 316-321. Available from: https://doi.org/10.1109/MED.2017.7984137uk_UA
dc.relation.references19. KARWAT, B., RUBACHA, P., STANCZYK, E. Simulational and experimental determination of the exploitation parameters of a screw conveyor. Eksploatacja i Niezawodnosc/Maintenance and Reliability [online]. 2020, 22(4), p. 741-747. ISSN 1507-2711, eISSN 2956-3860. Available from: https://doi.org/10.17531/ein.2020.4.18uk_UA
dc.relation.references20. CLEARY, P. W. DEM modelling of particulate flow in a screw feeder model description. Progress in Computational Fluid Dynamics, an International Journal [online]. 2007, 7(2-4), p. 128-138. ISSN 1468-4349, eISSN 1741-5233. Available from: https://doi.org/10.1504/PCFD.2007.013005uk_UA
dc.relation.references21. KRETZ, D., CALLAU-MONJE, S., HITSCHLER, M., HIEN, A., RAEDLE, M., HESSER, J. Discrete element method (DEM) simulation and validation of a screw feeder system. Powder Technology [online]. 2016, 287, p. 131-138. ISSN 0032-5910, eISSN 1873-328X. Available from: https://doi.org/10.1016/j.powtec.2015.09.038uk_UA
dc.relation.references22. LOPEZ, A., VIVACQUA, V., HAMMOND, R., GHADIRI, M. Analysis of screw feeding of faceted particles by discrete element method. Powder Technology [online]. 2020, 367, p. 474-486. ISSN 0032-5910. Available from: https://doi.org/10.1016/j.powtec.2020.03.064uk_UA
dc.relation.references23. PATINGE, S., PRASAD, K. Screw feeder performance prediction using discrete element method. International Journal of Scientific and Engineering Research [online]. 2017, 8(3), p. 48-51 [accessed 2023-03-27]. ISSN 2229-5518. Available from: https://www.ijser.org/researchpaper/Screw-feeder-performance-prediction-using-Discrete-Element-Method-DEM.pdfuk_UA
dc.relation.references24. BURKHARDT, G. J. Effect of pitch, radial clearance, hopper exposure and head on performance of screw feeders. Transactions of the American Society of Agricultural Engineers [online]. 1967, 10, p. 685-690. ISSN 0001-2351, eISSN 2151-0059. Available from: https://doi.org/10.13031/2013.39761uk_UA
dc.relation.references25. CARLETON, A. J., MILES, J. E. P., VALENTIN, F. H. H. A study of factors affecting the performance of screw conveyors and feeders. Journal of Engineering for Industry [online]. 1969, 91(2), p. 329-333. ISSN 0022-0817. Available from: https://doi.org/10.1115/1.3591565uk_UA
dc.relation.references26. CARSON, J. W. Designing efficient screw feeders. Powder and Bulk Engineering. 1987, 12, p. 32-42. ISSN 0897-6627.uk_UA
dc.relation.references27. FERNANDEZ, J. W., CLEARY, P. W., MCBRIDE, W. Effect of screw design on hopper drawdown of spherical particles in a horizontal screw feeder. Chemical Engineering Science [online]. 2011, 66, p. 5585-5601. ISSN 0009-2509. Available from: https://doi.org/10.1016/j.ces.2011.07.043uk_UA
dc.relation.references28. PATEL, J. N., PATEL, S. P., PATEL, S. S. Productivity improvement of screw conveyor by modified design. The International Journal of Emerging Technology and Advanced Engineering [online]. 2013, 3(1). p. 492-496 [accessed 2023-03-27]. ISSN 2250-2459. Available from: https://www.ijetae.com/files/Volume3Issue1/IJETAE_0113_77.pdfuk_UA
dc.identifier.doihttps://doi.org/10.26552/com.C.2023.068-
dc.contributor.affiliationTernopil Ivan Puluj National Technical University, Ternopil, Ukraineuk_UA
dc.contributor.affiliationТернопільський національний технічний університет імені Івана Пулюяuk_UA
dc.identifier.scopus58698210400-
dc.identifier.scopushttps://www.scopus.com/authid/detail.uri?authorId=58698210400-
dc.identifier.orcid0000-0003-4345-9770-
dc.identifier.orcid0000-0001-8517-3223-
dc.identifier.orcid0000-0002-7325-8016-
dc.identifier.orcid0000-0002-4089-207X-
dc.citation.journalTitleCommunications - Scientific Letters of the University of Zilina-
dc.citation.issueVolume 25-
dc.coverage.countrySKuk_UA
Apareix a les col·leccions:Наукові публікації працівників кафедри інжинірингу машинобудівних технологій

Arxius per aquest ítem:
Arxiu Descripció MidaFormat 
Influence of the Design Parameters of a Screw Feeder Loading Mechanism on the Torque Value of the Drive Shaft.pdf3,72 MBAdobe PDFVeure/Obrir
12.jpg1,34 MBJPEGVeure/Obrir
Mostrar el registre simplificat de l'ítem


Els ítems de DSpace es troben protegits per copyright, amb tots els drets reservats, sempre i quan no s’indiqui el contrari.

Eines d'Administrador