Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: http://elartu.tntu.edu.ua/handle/lib/38565
Назва: Удосконалення технологічного процесу механічного оброблення фланця 753.172.004
Інші назви: Improvement of the flange 753.172.004 machining production process
Автори: Таное, Езекіль
Tanoe, Ezekiel
Бібліографічний опис: Таное Езекіль Удосконалення технологічного процесу механічного оброблення фланця 753.172.004: кваліфікаційна робота бакалавра за спеціальністю “131 - прикладна механіка” / Езекіль Таное. – Тернопіль: ТНТУ, 2022. – 51 с.
Дата публікації: 2-лип-2022
Дата подання: 2-лип-2022
Дата внесення: 16-лип-2022
Країна (код): UA
Науковий керівник: Васильків, Василь Васильович
Члени комітету: Пилипець, Оксана Михайлівна
УДК: 621.9
Теми: фланець
механічна обробка
технологічний процес
flange
mechanical processing
technological process
Короткий огляд (реферат): В кваліфікаційній роботі вдосконалено технологію виготовлення фланця 753.172.004. В роботі розроблено питання аналізу фланця, його призначення, характеристика можливого варіанту виробництва, аналіз застосування технічних засобів. Також проведено попереднє встановлення типу виробництва відносно заданої програми, запропоновано варіанти можливого технологічного процесу, розроблено оптимальний технологічний процес на базі аналізу технологічних властивостей і базових можливостей деталі.
In the qualification work, the manufacturing technology of the 753.172.004 flange was improved. The work deals with the analysis of the flange, its purpose, the characteristics of a possible production option, and the analysis of the use of technical means. A preliminary determination of the type of production in relation to the given program was also carried out, options for a possible technological process were proposed, an optimal technological process was developed based on the analysis of the technological properties and basic capabilities of the part.
Зміст: Introduction 1 GENERAL TECHNICAL PART 1.1. Purpose, characteristics and analysis of technical requirements for the flange 753.172.004 1.2. Analysis of the manufacturability of the design of the part 1.4. Conclusions and tasks for qualification work 2 TECHNOLOGICAL PARTS 2.1. Determining the type of production 2.2. Choosing the method of obtaining the workpiece 2.3. Choosing technological bases 2.4. Designing a technological route of mechanical processing details 2.5. Determination of allowances for processing 2.6 Dimensional analysis of the technological process 2.7 Choosing a cutting and measuring tool 2.8 Calculation and selection of processing modes 2.9 Calculation and selection of technical standards of time 2.10 Determination of equipment characteristics. Construction of schedules of loading and use of the equipment 3 DESIGN PART 3.1 Calculation of the parameters of the device for drilling four holes Ø6.8 mm. 3.2 Calculation of the four-spindle drilling head 3.3. Conclusions 4. LIFE SAFETY, BASICS OF LABOR PROTECTION 4.1. Development of measures to reduce noise at the site 4.2. Measures for fire safety of the designed site CONCLUSIONS LIST OF REFERENCES APPENDICES
URI (Уніфікований ідентифікатор ресурсу): http://elartu.tntu.edu.ua/handle/lib/38565
Власник авторського права: © Таное Езекіль, 2022
Перелік літератури: 1. Anuriev, VI Handbook of the designer-machine builder / VI Anuriev. In 3 volumes vol. T.1. Ed. 6 th revision. and additional. - M .: Mechanical Engineering, 1982. - 736 p. 2. Gorbatsevich, AF Course designing in engineering technology:Textbook for high schools / AF Gorbatsevich, VAShkred Izd. 5th - M .: Alliance, 2007. - 256 p. 3. Diploma design on technology of machine building / Ed. VV Grandma - Minsk: Higher school, 1979. - 464 p. 4. Dobryansky, SS Technology of mechanical engineering and technological bases of mechanical engineering / SS Dobryansky, VK Frolov, Yu.M. Malafeev, VM Gritsenko - K .: NTUU "KPI", 2007. - 72 p. 5. General machine-building standards of time and cutting modes for standardization of work performed on universal and multi-purpose machine tools with CNC. / Part 2. Rules of cutting modes. - Moscow: Economics, 1990. - 474 p. 6. Gorbatyuk, EO Technology of mechanical engineering. / EO Gorbatyuk, MP Mazur, AS Zenkin, VD Karazey - K .: "New World", 2009. - 360 p. 15. 7. Ilyankov, AI Engineering Technology: Practicum and course design. / AI Ilyankov, V.Yu. Novikov - Moscow: Academy, 2012. - 432 pp. 8. Vasylkiv V., Danylchenko L., Radyk D. Technological methods of manufacturing workpieces. Casting: Manual. Edited by L. Dzhydzhor. Ternopil: Aston, 2021, 205 p. 9. Creating a 3D model. Study guides for lab classes № 4 in the “CAM and САЕ Systems of Machine Building Production” course.Editors:Vasylkiv V., Danylchenko L., Radyk D. -Ternopil: Ternopil National Ivan Puluj Technical University, 2021. - 40 р. 10. Creating a parametric drawing in the automatic parameterization mode.Study guides for lab classes № 3 in the “CAM and САЕ Systems of Machine Building Production” course.Editors:Vasylkiv V., Danylchenko L., Radyk D. -Ternopil: Ternopil National Ivan Puluj Technical University, 2021. - 28 р. 11. Creating Parametric Drawing.Study guides for lab classes № 2 in the “CAM and САЕ Systems of Machine Building Production” course.Editors:Vasylkiv V., Danylchenko L., Radyk D. -Ternopil: Ternopil National Ivan Puluj Technical University, 2021. - 38 р. 12. Sketching by Non-parametric Drawing.Study guides for lab classes № 1 in the “CAM and САЕ Systems of Machine Building Production” course.Editors:Vasylkiv V., Danylchenko L., Radyk D. -Ternopil: Ternopil National Ivan Puluj Technical University, 2021. - 28 р. 13. Creating a 3D model from a 2D drawing. Study guides for lab classes № 5 in the “CAM and САЕ Systems of Machine Building Production” course.Editors:Vasylkiv V., Danylchenko L., Radyk D. -Ternopil: Ternopil National Ivan Puluj Technical University, 2021. - 39 р. 14. Vasylkiv V., Pylypets M., Danylchenko L., Radyk D. (2021) Use of computer-integrated technologies in training of engineering specialists. In: Ternopil National Ivan Puluj Technical University, Proceedings of the International Conference Advanced Applied Energy and Information Technologies, Ternopil, December 15-17, 2021, pp. 74-80. 15. Vasylkiv V., Danylchenko L. Factors influencing the value of spring back of sheet material in bending. Materials of the International scientific and technical conference "Fundamental and applied problems of modern technologies" to the 100th anniversary of the foundation of the National Academy of Sciences of Ukraine and to the commemoration of Ivan Puluj (100th anniversary from the day of death) (Tern ., 22-24 May 2018), pp. 84-85. 16. Health and Safety Executive information sheet. Safe use of horizontal boring machines Engineering Information Sheet No 28 (Revision 1). This document is available at: www.hse.gov.uk/pubns/eis28.pdf. 17. Safety and health in the use of machinery. ILO code of practice Geneva, International Labor Office, Program on Safety and Health at Work and the Environment, 2013. 18. Ibrahim A. Al-Zkeri, MS Finite element modeling of hard turning. The Ohio State University, 2007. 19. Mikell P. Groover. Fundamentals of Modern Manufacturing. Materials, Processes, and Systems. Fifth Edition. John Wiley & Sons, Inc., 2013. 20. Kalpakjian, S., and Schmid SR Manufacturing Processes for Engineering Materials, 6th ed. Pearson Prentice Hall, Upper Saddle River, New Jersey, 2010. 21. Groover, MP Work Systems and the Methods, Measurement, and Management of Work, Pearson Prentice-Hall, Upper Saddle River, New Jersey, 2007. 22. Groover, MP Automation, Production Systems, and Computer Integrated Manufacturing, 3rd ed. Pearson Prentice-Hall, Upper Saddle River, New Jersey, 2008. 23. Boothroyd, G., and Knight, WA Fundamentals of Metal Machining and Machine Tools, 3rd ed. CRC Taylor & Francis, Boca Raton, Florida, 2006. 24. Bakerjian, R. (ed.). Tool and Manufacturing Engineers Handbook. 4th ed. Vol VI, Design for Manufacturability. Society of Manufacturing Engineers, Dearborn, Mich., 1992. 25. Parsai, H., Leep, H., and Jeon, G. The Principles of Group Technology and Cellular Manufacturing, John Wiley & Sons, Hoboken, New Jersey, 2006. 26. A handbook of a technologist-machine builder in 2 volumes of T1. Ed. AG Kosilova and RK Meshcheryakova - 4th ed. Recycled and supplemented - M .: Mashinostroenie, 1986. - 656 p. 27. A handbook of the technologist-machine builder In 2 volumes of T2. Ed. AG Kosilova, RK Meshcheryakova - 4th ed. Recycled and supplemented - M.: Mashinostroenie, 1986. - 496 p.
Тип вмісту: Bachelor Thesis
Розташовується у зібраннях:131 — Прикладна механіка (бакалаври)

Файли цього матеріалу:
Файл Опис РозмірФормат 
Dyplom_Tanoe_Ezekiel_2022.pdf1,31 MBAdobe PDFПереглянути/відкрити


Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.

Інструменти адміністратора