Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: http://elartu.tntu.edu.ua/handle/lib/29500
Назва: Determination of the Rational Composition of the Additive to Oil with the Use of the Katerynivka Friction Geo Modifier
Автори: Aulin, Viktor
Lyashuk, Oleg Leontiyovych
Hrynkiv, Andrii
Lysenko, Sergii
Zamota, Taras
Vovk, Yuriy Yaroslavovych
Pankov, Andrii
Tykhyi, Andrii
Horkunenko, Andriy
Вовк, Юрій Ярославович
Ляшук, Олег Леонтійович
Приналежність: Ternopil Ivan Puluj National Technical University
Бібліографічний опис: Aulin V., Lyashuk O., Hrynkiv A., Lysenko S., Zamota T., Vovk Y., Pankov A., Tykhyia A., Horkunenko A. Determination of the Rational Composition of the Additive to Oil with the Use of the Katerynivka Friction Geo Modifier / Tribology in Industry. - 2019. - Vol. 41, No. 4, pp. 548-562. https://doi.org/10.24874/ti.2019.41.04.08
Bibliographic description: Aulin V., Lyashuk O., Hrynkiv A., Lysenko S., Zamota T., Vovk Y., Pankov A., Tykhyia A., & Horkunenko A. (2019). Determination of the Rational Composition of the Additive to Oil with the Use of the Katerynivka Friction Geo Modifier. Tribology in Industry, 41(4), 548-562. https://doi.org/10.24874/ti.2019.41.04.08
Дата публікації: гру-2019
Дата внесення: 14-гру-2019
Видавництво: University of Kragujevac
DOI: 10.24874/ti.2019.41.04.08
Теми: Tribological additive
Clay
Wear
Oil
Lithium soaps
Sodium soaps
Metakaolin
Welding load
Maximum load
Optimized composition
Діапазон сторінок: 548-562
Короткий огляд (реферат): Studies of the formation of the optimal composition of Tribological additives to the base oil have shown the possibility of improving the characteristics of the tribosystem. It was revealed that this Tribological additive makes it possible to form functional surface layers that provide normal operating conditions for tribological conjugation of parts. Based on the optimization of the technical condition of the Tribological additives, the optimal values of each of its components are obtained. Optimization of the condition provided that the amount of wear should tend to a minimum, and the maximum load and loading of the weld should tend to a maximum. Based on the experimental database on the 4-ball friction machine, an equation is obtained for each of the indicated response functions of the resulting features, based on which, with a desirability value of the order of 1.0, the composition of Tribological additives is obtained: from Katerynivka Friction geo modifiers; Sodium oleate, copper sulfate and phosphor TAT 33. It was found that the adding of TM-3-18k into the oil Tribological additives in the amount of 5.75% under laboratory conditions can reduce the wear rate by 35.1 – 35.5%, the maximum load also increases by 17.1 – 17.2%, and the welding load increases by 5.3 – 8.4%. The analysis of experimental data shows that this Tribological additive can be operated at locally loaded parts of 1035 N, and the peak contact overload is up to 2385 N. The research results suggest that the proposed Tribological supplement makes it possible to improve the characteristics of the tribosystem. It can be useful to service and trucking enterprises during technical service and for the manufacturing of composite oil.
URI (Уніфікований ідентифікатор ресурсу): http://elartu.tntu.edu.ua/handle/lib/29500
References: [1] V. Aulin, A. Hrinkiv, A. Dykha, M. Chernovol, O. Lyashuk, S. Lysenko, Substantiation of diagnostic parameters for determining the technical condition of transmission assemblies in trucks, Eastern-European Journal of Enterprise Technologies, vol. 2, no. 1-92, pp. 4-13, 2018. doi: 10.15587/1729-4061.2018.125349 [2] V. Aulin, S. Lysenko, O. Lyashuk, A. Hrinkiv, D. Velykodnyi, Y. Vovk, D. Holub, A. Chernai, Wear Resistance Increase of Samples Tribomating in Oil Composite with Geo Modifier КGМF-1, Tribology in Industry, vol. 41, no. 2, рp. 156-165, 2019. doi: 10.24874/ti.2019.41.02.02 [3] L.Ya. Ropyak, I.P. Shatskyi, M.V. Makoviichuk, Influence of the oxide-layer thickness on the ceramic-aluminium coating resistance to indentation, Metallofizika i Noveishie Tekhnologii, vol. 39, no. 4, pp. 517-524, 2017. doi: 10.15407/mfint.39.04.0517 [4] D. Aleksandr, M. Dmitry, Prediction the wear of sliding bearings, International Journal of Engineering and Technology(UAE), vol. 7, no. 2, pp. 4-8, 2018. doi: 10.14419/ijet.v7i2.23.11872 [5] S.І. Kryshtopa, D.Y. Petryna, I.М. Bogatchuk, I.B. Prun’ko, V.М. Меlnyk, Surface Hardening of 40KH Steel by Electric-Spark Alloying, Materials Science, vol. 53, no. 3, pp. 351-358, 2017. doi: 10.1007/S11003-017-0082-Y [6] V. Aulin, A. Hrynkiv, S. Lysenko, I. Rohovskii, M. Chernovol, O. Lyashuk, T. Zamota, Studying truck transmission oils using the method of thermal-oxidative stability during vehicle operation, Eastern-European Journal of Enterprise Technologies, vol. 1, no. 6-97, pp. 7-12, 2019. doi: 10.15587/1729-4061.2019.156150 [7] S. Kopčanová, M. Kučera, M. Kučera, M. Kučera, V. Kučerová, The effect of friction behaviour and wear protection ability of selected base lubricants on tribo-pairs parameters of machine components, Tribology in Industry, vol. 40, no. 4, pp. 681-691, 2018. doi: 10.24874/ti.2018.40.04.14 [8] S. Kryshtopa, A. Kozhevnykov, M. Panchuk, L. Kryshtopa, Influence of triboelectric processes on friction characteristics of brake units of technological transport, Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, vol. 3, pp. 87-93, 2018. doi: 10.29202/nvngu/2018-3/10 [9] V. Aulin, A. Hrynkiv, S. Lysenko, A. Dykha, T. Zamota, V. Dzyura, Exploring a possibility to control the stressed-strained state of cylinder liners in diesel engines by the tribotechnology of alignment (2019), Eastern-European Journal of Enterprise Technologies, vol. 3, no. 12-99, pp. 6-16, 2019. doi: 10.15587/1729-4061.2019.171619 [10] I. Levanov, E. Zadorozhnaya, D. Vichnyakov, Influence of friction geo-modifiers on HTHS viscosity of motor oils, Lecture Notes in Mechanical Engineering, (9783319956299), pp. 967-972, 2019. doi: 10.1007/978-3-319-95630-5_101 [11] M.F. Abd Al-Samieh, Surface roughness effects for Newtonian and non-Newtonian lubricants, Tribology in Industry, vol. 41, no. 1, pp. 56-63, 2019. doi: 10.24874/ti.2019.41.01.07 [12] P. Prysyazhnyuk, D. Lutsak, L. Shlapak, V. Aulin, L. Lutsak, L. Borushchak, T.A. Shihab, Development of the composite material and coatings based on niobium carbide, Eastern-European Journal of Enterprise Technologies, vol. 6, no. 12-96, pp. 43-49, 2018. doi: 10.15587/1729-4061.2018.150807 [13] G.M. Ashmarin, V.V. Aulin, M.Yu. Golubev, S.D. Zvonkov, Grain boundary internal friction of unalloyed copper subjected to continuous laser radiation, Physics and chemistry of materials treatment, vol. 20, no. 5, pp. 476-478, 1986. [14] I.P. Shatskyi, M.V. Makoviichuk, A.B. Shcherbii, Equilibrium of cracked shell with flexible coating, Shell Structures: Theory and Applications, Proceedings of the 11th International Conference on Shell Structures: Theory and Applications, SSTA 2017, vol. 4, pp. 165-168, 2018. doi: 10.1201/9781315166605-34 [15] S.I. Osadchiy, V.A. Zozulya, Combined method for the synthesis of optimal stabilization systems of multidimensional moving objects under stationary random impacts, Journal of Automation and Information Sciences, vol. 45 no. 6, pp. 25-35, 2018. doi: 10.1615/JAutomatInfScien.v45.i6.30 [16] V.V. Aulin, O. Lyashuk, O. Pavlenko, D. Velykodnyi, A. Hrynkiv, S. Lysenko, D. Holub, Y. Vovk, V. Dzyura, M. Sokol, Realization of the logistic approach in the international cargo delivery system, Communication – Scientific Letters of the University of Zilina, vol. 21, no. 2, pp. 5-14, 2019. [17] S.I. Osadchiy, V.M. Kalich, O.K. Didyk, Structural identification of unmanned supercavitation vehicle based on incomplete experimental data, 2013 IEEE 2nd International Conference on Actual Problems of Unmanned Air Vehicles Developments, APUAVD 2013 - Proceedings, 6705294, pp. 93-95, 2013. doi: 10.1109/APUAVD.2013.6705294 [18] A. Dykha, V. Aulin, O. Makovkin, S. Posonskiy, Determining the characteristics of viscous friction in the sliding supports using the method of pendulum, Eastern-European Journal of Enterprise Technologies, vol. 3, no. 7-87, pp. 4-10, 2017. doi: 10.15587/1729-4061.2017.99823 [19] S. Kryshtopa, L. Kryshtopa, I. Bogatchuk, I. Prunko, V. Melnyk, Examining the effect of triboelectric phenomena on wear-friction properties of metal-polymeric frictional couples, Eastern-European Journal of Enterprise Technologies, vol. 1, no. 5-85, pp. 40-45, 2017. doi: 10.15587/1729-4061.2017.91615 [20] A.K. Prokopenko, A.P. Golubev, A.A. Korneev, Research on wear resistance of multifunctional coatings used in the manufacture of art and industrial products, Materials Science Forum, vol. 945 MSF, pp. 670-674, 2018. doi: 10.4028/www.scientific.net/MSF.945.670 [21] M. Michalec, P. Svoboda, I. Krupka, M. Hartl, Tribological behaviour of smart fluids influenced by magnetic and electric field – A review, Tribology in Industry, vol. 40, no. 4, pp. 515-528, 2018. doi: 10.24874/ti.2018.40.04.01 [22] D.W. Kim, K. Eum, H. Kim, D. Kim, M.D.D. Mello, K. Park, M. Tsapatsis, Continuous ZIF-8/reduced graphene oxide nanocoating for ultrafast oil/water separation, Chemical Engineering Journal, vol. 372, pp. 509-515, 2019. doi: 10.1016/j.cej.2019.04.179 [23] I. Levanov, A. Doykin, E. Zadorozhnaya, R. Novikov, Investigation antiwear properties of lubricants with the geo-modifiers of friction, Tribology in Industry, vol. 39, no. 3, pp. 302-306, 2017. doi: 10.24874/ti.2017.39.03.04 [24] M. Schott, A.K. Schlarb, Simulation of the thermal budget of plastic/metal tribological pairings by means of FEM [Simulation des thermischen haushalts von kunststoff/metall-gleitpaarungen mittels FEM], Tribologie und Schmierungstechnik, vol. 65, no. 1, pp. 20-26, 2018. [25] G. Riva, G. Perricone, J. Wahlström, Simulation of contact area and pressure dependence of initial surface roughness for cermet-coated discs used in disc brakes, Tribology in Industry, vol. 41, no. 1, pp. 1-13, 2019. doi: 10.24874/ti.2019.41.01.01 [26] P.M. Prysyazhnyuk, T.A. Shihab, V.H. Panchuk, Formation of the Structure of Cr3C2–MNMts 60-20-20 Cermets, Materials Science, vol. 52, no. 2, pp. 188-193, 2016. doi: 10.1007/s11003-016-9942-0 [27] G.M. Ashmarin, V.V. Aulin, M.Yu. Golobev, S.D. Zvonkov, O.T. Malyuchkov, Еlectrical conductivity of copper after laser treatment, Russian metallurgy. Metally, vol. 5, pp. 185-189, 1986. [28] V. Aulin, O. Lyashuk, A. Tykhyi, S. Karpushyn, N. Denysiuk, Influence of rheological properties of a soil layer adjacent to the working body cutting element on the mechanism of soil cultivation, Acta Technologica Agriculturae, vol. 21, no. 4, pp. 153-159, 2018. doi: 10.2478/ata-2018-0028 [29] S.V. Fedorov, Nano-structural standard of friction and wear, Tribology in Industry, vol. 40, no. 2, pp. 225-238, 2018. doi: 10.24874/ti.2018.40.02.06 [30] M. Chernets, A method for predicting contact strength and life of Archimedes and involute worm gears, considering the effect of wear and teeth correction, Tribology in Industry, vol. 41, no. 1, pp. 134-141, 2019. doi: 10.24874/ti.2019.41.01.15 [31] C. Ratnam, N.M. Jasmin, V.V. Rao, K.V. Rao, A comparative experimental study on fault diagnosis of rolling element bearing using acoustic emission and soft computing techniques, Tribology in Industry, vol. 40, no. 3, pp. 501-513, 2018. doi: 10.24874/ti.2018.40.03.15 [32] A. V. Gritsenko, E. A. Zadorozhnaya, V.D. Shepelev, Diagnostics of friction bearings by oil pressure parameters during cycle-by-cycle loading, Tribology in Industry, vol. 40, no. 2, pp. 300-310, 2018. doi: 10.24874/ti.2018.40.02.13 [33] A. Dykha, O. Makovkin, Physical basis of contact mechanics of surfaces, Journal of Physics: Conference Series, vol. 1172, no. 1, art. No 012003, 2019. doi: 10.1088/1742-6596/1172/1/012003 [34] S. Kryshtopa, M. Panchuk, F. Kozak, B. Dolishnii, I. Mykytii, O. Skalatska, Fuel economy raising of alternative fuel converted diesel engines, Eastern-European Journal of Enterprise Technologies, vol. 4, no. 8-94, pp. 6-13, 2018. doi: 10.15587/1729-4061.2018.1393581 [35] V.V. Aulin, M.I. Chernovol, A.O. Pankov, T.M. Zamota, K.K. Panayotov, Sowing machines and systems based on the elements of fluidics, INMATEH - Agricultural Engineering, vol. 53, no. 3, pp. 21-28, 2017. [36] V. Aulin, W. Arifa, S. Lysenko, A. Kuzyk, Improving of the wear resistance of working parts agricultural machinery by the implementation of the effect of self-sharpening, International Journal of Engineering and Technology(UAE), vol. 5, no. 4, pp. 126-130, 2016. doi: 10.14419/ijet.v5i4.6386 [37] A. Painuly, A. Arora, Rayleigh wave at composite porous half space saturated by two immiscible fluids, Applied Mathematical Modelling, vol. 73, pp. 124-135, 2019. doi: 10.1016/j.apm.2019.03.038 [38] P. Prysyazhnyuk, D. Lutsak, L. Shlapak, V. Aulin, L. Lutsak, L. Borushchak, T.A. Shihab, Development of the composite material and coatings based on niobium carbide, Eastern-European Journal of Enterprise Technologies, vol. 6, no. 12-96, pp. 43-49, 2018. doi: 10.15587/1729-4061.2018.150807 [39] J. Bautista-Ruiz, J.C. Caicedo, W. Aperador, Evaluation of the wear-corrosion process in beta-tricalcium (Β-TCP) films obtained by Physical Vapor Deposition (PVD), Tribology in Industry, vol. 41, no. 1, pp. 126-133, 2019. doi: 10.24874/ti.2019.41.01.14
Тип вмісту: Article
Розташовується у зібраннях:Наукові публікації працівників кафедри транспортних технологій та механіки

Файли цього матеріалу:
Файл Опис РозмірФормат 
8-775.pdf1,33 MBAdobe PDFПереглянути/відкрити


Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.

Інструменти адміністратора