Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал:
http://elartu.tntu.edu.ua/handle/lib/28687
Назва: | Phase transformations and mechanical properties of the nitinol alloy with shape memory |
Автори: | Iasnii, Volodymyr Junga, Robert |
Приналежність: | ernopil Ivan Puluj National Technical University, Faculty of Engineering of Machines, Structures and Technologies, Ruska str., 56, Ternopil, 46001, Ukraine Politechnika Opolska, Opole, Poland |
Бібліографічний опис: | V. Iasnii, R. Junga. Phase transformations and mechanical properties of the nitinol alloy with shape memory // Materials Science. – 2018. – 54, № 3. – pp. 406–411. |
Журнал/збірник: | Materials Science |
Випуск/№ : | 3 |
Том: | 54 |
Дата публікації: | лис-2018 |
Дата внесення: | 5-лип-2019 |
Видавництво: | Springer US |
DOI: | 0.1007/s11003-018-0199-7 |
Теми: | Ni–Ti alloy temperatures of phase transformations stress-strain diagram scaling factor |
Діапазон сторінок: | 406-411 |
Початкова сторінка: | 406 |
Кінцева сторінка: | 411 |
Короткий огляд (реферат): | We study the Ni55.8Ti44.2 alloy in the form of rods 8 mm and wires 1.5 mm in diameter. By the method of differential scanning calorimetry, we find the temperatures of phase transformations different for the rods and the wires. The stresses corresponding to the onset and termination of phase transformations at room temperature are determined. We also analyze the influence of the diameters of specimens on thetemperatures of phase transformations, deformation of behavior of the alloy, and its mechanical charac-teristics. |
URI (Уніфікований ідентифікатор ресурсу): | http://elartu.tntu.edu.ua/handle/lib/28687 |
ISSN: | 1573-885X |
URL-посилання пов’язаного матеріалу: | https://link.springer.com/article/10.1007/s11003-018-0199-7 |
References: | 1. S. Miyazaki, S. Kimura, F. Takei, T. Miura, K. Otsuka, and Y. Suzuki, “Shape memory effect and pseudoelasticity in a TiNi single crystal,” Scr. Metall.,17, No. 9, 1057–1062 (1983). 2. O. S. Onyshko, “Modeling of the physicomechanical behavior of bodies made of alloys with shape memory in the presence of elec-tric fields, Mater. Sci.,53, No. 4, 541–547 (2018). 3. H. Ma and C. Cho, “Feasibility study on a superelastic SMA damper with recentering capability,” Mater. Sci. Eng. A,473, Nos.1–2, 290–296 (2008). 4. P. Yasniy, M. Kolisnyk, O. Kononchuk, and V. Iasnii, “Calculation of constructive parameters of SMA damper,” Sci. J. TNTU,88, No. 4, 7–15 (2017). 5. J. A. Shaw and S. Kyriakides, “Thermomechanical aspects of NiTi,” J. Mech. Phys. Solids,43, No. 8, 1243–1281 (1995). 6. L. V. Bazyuk and N. V. Meshcheryakova, “Methods for the determination of the enthalpy of metals and alloys (a survey),” Visn. Prykarpat. Nats. Univ. Stefanyka, Ser. Khim., No. 11, 81–89 (2011) 7. K. V. Kodre, S. R. Attarde, P. R. Yendhe, R. Y. Patil, and V. U. Barge, “Differential scanning calorimetry: A review,” Res. Rev. J. Pharm. Anal.,3, No. 3, 11–22 (2014). 8. V. Iasnii, V. Brevus, and P. Marushchak, “A method and some results of studies of slow deformation and fracture of heat-resistant steel,” Visn. TNTU,69, No. 1, 7–13 (2013). 9. ASTM F2516-14. Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials, ASTM International, Con-shohocken (2014). 10. Introduction to Nitinol, Memry Corporation, Bethel–Menlo Park–New Hartford (2017). 11. V. Torra, S. Casciati, and M. Vece, “Shape memory alloys wires: from small to medium diameter,” Adv. Sci. Technol. Trans. Tech. Publ.,101, 79–88 (2016). |
Тип вмісту: | Article |
Розташовується у зібраннях: | Наукові публікації працівників кафедри будівельної механіки |
Файли цього матеріалу:
Файл | Опис | Розмір | Формат | |
---|---|---|---|---|
Iasnii-Junga2018_Article_PhaseTransformationsAndMechani.pdf | 741,85 kB | Adobe PDF | Переглянути/відкрити |
Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.
Інструменти адміністратора