Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: http://elartu.tntu.edu.ua/handle/123456789/5732

Назва: Вплив концентраторів напружень на напружено-деформований стан пружно-пластичних пластин
Інші назви: Influence of stress concentrators onto stress-strain state of elasto-plastic plates
Автори: Кузь, Ольга Назарівна
Пиз, Назарій Ярославович
Kuz’, I.
Kuz’, O.
Pyz, N.
Бібліографічний опис: Кузь І. Вплив концентраторів напружень на напружено-деформований стан пружно-пластичних пластин / І. Кузь, О. Кузь, Н. Пиз // Вісник ТНТУ — Тернопіль : ТНТУ, 2014. — Том 76. — № 4. — С. 79-88. — (Механіка та матеріалознавство).
Bibliographic description: Kuz’ I. Influence of stress concentrators onto stress-strain state of elasto-plastic plates / I. Kuz’, O. Kuz’, N. Pyz // Bulletin of TNTU — Ternopil : TNTU, 2014. — Volume 76. — No 4. — P. 79-88. — (Mechanics and materials science).
Дата публікації: 18-гру-2014
Дата внесення: 15-лип-2015
Видавництво: Тернопiльський національний технiчний унiверситет iменi Iвана Пулюя
Місце видання, проведення: Тернопіль
УДК: 539.3
Теми: пластина
круговий отвір
розріз
абсолютно жорстке включення
теорія малих пружно-пластичних деформацій
лінійне зміцнення
розвантаження
варіаційно-різницевий метод
plate
disk hole
cut
rigid body
theory of small elastic-plastic deformations
linear strengthening
unloading
variation-difference method
Короткий огляд (реферат): На основі числового розв’язування крайових задач теорії малих пружно-пластичних деформацій для лінійно зміцнюваного матеріалу з урахуванням розвантаження з’ясовано вплив концентраторів напружень (отвору, розрізу, абсолютно жорсткого включення) в пластині на її напружено-деформований стан за одновісного розтягу.
Effective numerical methods for solving 2D problems related to the theories of elasticity and plasticity have been worked out. The variation-difference method of building finite difference schemes is extended to domains with curvilinear boundaries and disconnected domains. The application of the variation-difference method for solving problems of the theory of small elasto-plastic deformations relatively the plates with a hole and a cut, taking into account the linear strengthening of the material and unloading, has been developed. For solving the resultant systems of nonlinear and linear equation, the Newton-Kantorovich method and combined iterative method (gradient and cyclic Chebyshev’s one) were proposed to be used. The choice of iteration parameters of the methods for solving the obtained systems of linear and nonlinear algebraic equations was made. The elaborated software ensures solving the problems with different boundary conditions, medium and domain parameters. A variety of problems concerning one-axis stretching of the plates with a disk hole (or rigid body instead of a hole) and a cut (or a thin rigid body instead of a cut) is numerically solved. The zones of evolution of plastic deformations for step enlarging of the loading are constructed, the residual strains and the limit loads are obtained. The influence of a disk hole, cut and rigid body instead of a hole or cut in the plates onto the stress magnitude was found. The presence of rigid bodies instead of a hole or a cut strengthen the plate in general, in particular, plastic strains in the plate with rigid bodies instead of a hole and a cut appear under tension stress in 2,75 times more, than in the plate with a disk hole and a cut, and yield limit arrives at tension stress in 1,79 times more. A long thin rigid body strengthens a plate more than a disk one. The residual strains around a rigid body in the plates with a disk rigid body and a cut, and in the plates with a disk hole and a thin rigid body do not arise, in general.
URI (Уніфікований ідентифікатор ресурсу): http://elartu.tntu.edu.ua/handle/123456789/5732
ISSN: 1727-7108
Власник авторського права: © „Вісник Тернопільського національного технічного університету“
Перелік літератури: 1. Кузь, І.С. Дослідження пружно-пластичного з’єднувального елемента конструкцій під дією нерівномірних навантажень [Текст] / І.С. Кузь // Механіка і фізика руйнування матеріалів та конструкцій. – Львів: Каменяр. – 2009. – Вип.8. – С.35–41.
2. Кузь, І. Пластичне деформування пластин з двома співвісними або компланарними розрізами (абсолютно жорсткими включеннями) [Текст] / І. Кузь // Вісник Львів. ун-ту. Сер. мех.-мат. – 2012. – Вип. 76. – С.91–98.
3. Кузь, І.С. Одновісний розтяг пружно-пластичних пластин з квадратним отвором різної орієнтації [Текст] / І.С. Кузь, О.Н. Кузь // Вісник ТНТУ. – 2013. – No 4(72). – С.52–59.
4. Ильюшин, А.А. Пластичность. Основы общей математической теории [Текст] / А.А. Ильюшин. – М.: Изд-во АН СССР, 1963. – 272 с.
5. Победря, Б.Е. Численные методы в теории упругости и пластичности [Текст] / Б.Е. Победря. – М.: Изд-во Моск. ун-та, 1981. – 344 с.
6. Божидарник, В.В. Елементи теорії пластичності та міцності [Текст] / В.В. Божидарник, Г.Т. Сулим. – Львів: Світ. – Т.1. – 1999. – 532 с., Т.2. – 1999. – 419 с.
References: 1. Kuz, I.S. Doslidzhennia pruzhno-plastychnoho ziednuvalnoho elementa konstruktsii pid diieiu nerivnomirnykh navantazhen [Text] / I.S. Kuz // Mekhanika i fizyka ruinuvannia materialiv ta konstruktsii. – Lviv: Kameniar. – 2009. – Iss.8. – P.35–41.
2. Kuz, I. Plastychne deformuvannia plastyn z dvoma spivvisnymy abo komplanarnymy rozrizamy (absoliutno zhorstkymy vkliuchenniamy) [Text] / I. Kuz // Visnyk Lviv. un-tu. Ser. mekh.-mat. – 2012. – Iss. 76. – P.91–98.
3. Kuz, I.S. Odnovisnyi roztiah pruzhno-plastychnykh plastyn z kvadratnym otvorom riznoi oriientatsii [Text] / I.S. Kuz, O.N. Kuz // Visnyk TNTU. – 2013. – No 4(72). – P.52–59.
4. Iliushin, A.A. Plastichnost. Osnovy obshchei matematicheskoi teorii [Text] / A.A. Iliushin. – M.: Izd-vo AN SSSR, 1963. – 272 p.
5. Pobedria, B.E. Chislennye metody v teorii upruhosti i plastichnosti [Text] / B.E. Pobedria. – M.: Izd-vo Mosk. un-ta, 1981. – 344 p.
6. Bozhydarnyk, V.V. Elementy teorii plastychnosti ta mitsnosti [Text] / V.V. Bozhydarnyk, H.T. Sulym. – Lviv: Svit. – V.1. – 1999. – 532 p., V.2. – 1999. – 419 p.
Тип вмісту: Article
Розташовується у зібраннях:Вісник ТНТУ, 2014, № 4 (76)



Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.