Empreu aquest identificador per citar o enllaçar aquest ítem:
http://elartu.tntu.edu.ua/handle/123456789/1992
Títol: | Вплив відмінностей фізико-механічних властивостей металу наплавлення та основи на ндс роликів машин безперервного лиття заготовок |
Altres títols: | Effect of distinctions between physical and mechanical properties of cladding metal and base metal on the stress-strain state of rollers of continuous billet casting machines |
Autor: | Гопкало, О. Клипачевський, В. Gopkalo, O. Klipachevskiy, V. |
Bibliographic description (Ukraine): | Гопкало О. Вплив відмінностей фізико-механічних властивостей металу наплавлення та основи на НДС роликів машин безперервного лиття заготовок / Гопкало О., Клипачевський В. // Вісник ТНТУ. — 2011. — Том 16. — № 4. — С.46-57. — (механіка та матеріалознавство). |
Data de publicació: | 12-d’o-2011 |
Date of entry: | 10-d’a-2013 |
Editorial: | Тернопільський національний технічний університет ім. Івана Пулюя |
Place of the edition/event: | Тернопіль, Україна |
UDC: | 539.4 |
Paraules clau: | коефіцієнт лінійного розширення коефіцієнт теплопровідності термопружність напружено-деформований стан ролик машини безперервного лиття заготовок напруження епюра напружень coefficient of liner expansion thermal conductivity coefficient thermoelasticity, stress-strain state roller of continuous billet casting machine stress stress diagram |
Resum: | Чисельним моделюванням розглянуто вплив співвідношень коефіцієнтів лінійного розширення і теплопровідності металів основи та наплавлення, їх механічних властивостей на формування поля напружень поблизу контакту ролика зі слябом. Показано, що варіюванням значень цих співвідношень можливо регулювати величину та знак напружень на поверхні ролика. Встановлено, що чим більша різниця в значеннях теплофізичних коефіцієнтів, тим суттєвіше її вплив на НДС ролика. Numerical simulation was used to study the effect of the relationships between coefficients of linear expansion and thermal conductivity of the base metal and cladding metal as well as of their mechanical properties on the stress-strain state formation near the roller-to-slab contact. It is shown that by varying the values of these relationships it is possible to adjust the magnitude and sign of the stress on the roller surface. It is found that the larger the difference in thermal coefficients, the more significant is its effect on the stress-strain state of the roller. |
URI: | http://elartu.tntu.edu.ua/handle/123456789/1992 |
ISSN: | 1727-7108 |
Copyright owner: | © „Вісник Тернопільського національного технічного університету“ |
Publications status : | Опубліковано раніше |
Content type: | Article |
Apareix a les col·leccions: | Вісник ТНТУ, 2011, Том 16, № 4 |
Arxius per aquest ítem:
Els ítems de DSpace es troben protegits per copyright, amb tots els drets reservats, sempre i quan no s’indiqui el contrari.