Por favor use este identificador para citas ou ligazóns a este item: http://elartu.tntu.edu.ua/handle/123456789/1992

Título: Вплив відмінностей фізико-механічних властивостей металу наплавлення та основи на ндс роликів машин безперервного лиття заготовок
Outros títulos: Effect of distinctions between physical and mechanical properties of cladding metal and base metal on the stress-strain state of rollers of continuous billet casting machines
Authors: Гопкало, О.
Клипачевський, В.
Gopkalo, O.
Klipachevskiy, V.
Bibliographic description (Ukraine): Гопкало О. Вплив відмінностей фізико-механічних властивостей металу наплавлення та основи на НДС роликів машин безперервного лиття заготовок / Гопкало О., Клипачевський В. // Вісник ТНТУ. — 2011. — Том 16. — № 4. — С.46-57. — (механіка та матеріалознавство).
Data de edición: 12-Oct-2011
Date of entry: 10-Apr-2013
Editor: Тернопільський національний технічний університет ім. Івана Пулюя
Place of the edition/event: Тернопіль, Україна
UDC: 539.4
Palabras chave: коефіцієнт лінійного розширення
коефіцієнт теплопровідності
термопружність
напружено-деформований стан
ролик машини безперервного лиття заготовок
напруження
епюра напружень
coefficient of liner expansion
thermal conductivity coefficient
thermoelasticity, stress-strain state
roller of continuous billet casting machine
stress
stress diagram
Resumo: Чисельним моделюванням розглянуто вплив співвідношень коефіцієнтів лінійного розширення і теплопровідності металів основи та наплавлення, їх механічних властивостей на формування поля напружень поблизу контакту ролика зі слябом. Показано, що варіюванням значень цих співвідношень можливо регулювати величину та знак напружень на поверхні ролика. Встановлено, що чим більша різниця в значеннях теплофізичних коефіцієнтів, тим суттєвіше її вплив на НДС ролика.
Numerical simulation was used to study the effect of the relationships between coefficients of linear expansion and thermal conductivity of the base metal and cladding metal as well as of their mechanical properties on the stress-strain state formation near the roller-to-slab contact. It is shown that by varying the values of these relationships it is possible to adjust the magnitude and sign of the stress on the roller surface. It is found that the larger the difference in thermal coefficients, the more significant is its effect on the stress-strain state of the roller.
URI: http://elartu.tntu.edu.ua/handle/123456789/1992
ISSN: 1727-7108
Copyright owner: © „Вісник Тернопільського національного технічного університету“
Publications status : Опубліковано раніше
Content type: Article
Aparece nas ColecciónsВісник ТНТУ, 2011, Том 16, № 4



Todos os documentos en Dspace estan protexidos por copyright, con todos os dereitos reservados