Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen: http://elartu.tntu.edu.ua/handle/123456789/1992

Titel: Вплив відмінностей фізико-механічних властивостей металу наплавлення та основи на ндс роликів машин безперервного лиття заготовок
Sonstige Titel: Effect of distinctions between physical and mechanical properties of cladding metal and base metal on the stress-strain state of rollers of continuous billet casting machines
Autor(en): Гопкало, О.
Клипачевський, В.
Gopkalo, O.
Klipachevskiy, V.
Bibliographic description (Ukraine): Гопкало О. Вплив відмінностей фізико-механічних властивостей металу наплавлення та основи на НДС роликів машин безперервного лиття заготовок / Гопкало О., Клипачевський В. // Вісник ТНТУ. — 2011. — Том 16. — № 4. — С.46-57. — (механіка та матеріалознавство).
Erscheinungsdatum: 12-Okt-2011
Date of entry: 10-Apr-2013
Herausgeber: Тернопільський національний технічний університет ім. Івана Пулюя
Place of the edition/event: Тернопіль, Україна
UDC: 539.4
Stichwörter: коефіцієнт лінійного розширення
коефіцієнт теплопровідності
термопружність
напружено-деформований стан
ролик машини безперервного лиття заготовок
напруження
епюра напружень
coefficient of liner expansion
thermal conductivity coefficient
thermoelasticity, stress-strain state
roller of continuous billet casting machine
stress
stress diagram
Zusammenfassung: Чисельним моделюванням розглянуто вплив співвідношень коефіцієнтів лінійного розширення і теплопровідності металів основи та наплавлення, їх механічних властивостей на формування поля напружень поблизу контакту ролика зі слябом. Показано, що варіюванням значень цих співвідношень можливо регулювати величину та знак напружень на поверхні ролика. Встановлено, що чим більша різниця в значеннях теплофізичних коефіцієнтів, тим суттєвіше її вплив на НДС ролика.
Numerical simulation was used to study the effect of the relationships between coefficients of linear expansion and thermal conductivity of the base metal and cladding metal as well as of their mechanical properties on the stress-strain state formation near the roller-to-slab contact. It is shown that by varying the values of these relationships it is possible to adjust the magnitude and sign of the stress on the roller surface. It is found that the larger the difference in thermal coefficients, the more significant is its effect on the stress-strain state of the roller.
URI: http://elartu.tntu.edu.ua/handle/123456789/1992
ISSN: 1727-7108
Copyright owner: © „Вісник Тернопільського національного технічного університету“
Publications status : Опубліковано раніше
Content type: Article
Enthalten in den Sammlungen:Вісник ТНТУ, 2011, Том 16, № 4



Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.