Bu öğeden alıntı yapmak, öğeye bağlanmak için bu tanımlayıcıyı kullanınız:
http://elartu.tntu.edu.ua/handle/123456789/778
Başlık: | Газоабразивне зношування електродугових покривів з порошкових дротів за підвищеної температури |
Diğer Başlıklar: | High temperature gasabrasive wear of electric arc sprayed coating from flux cored wires |
Yazarlar: | Студент, Михайло Михайлович Student, M. |
Bibliographic description (Ukraine): | Студент М.Газоабразивне зношування електродугових покривів з порошкових дротів за підвищеної температури / Студент М. // Вісник ТНТУ. — 2010. — Том 15. — № 4. — С.20-26. — (механіка та матеріалознавство). |
Yayın Tarihi: | 12-Kas-2010 |
Date of entry: | 28-Şub-2011 |
Yayıncı: | Тернопільський національний технічний університет ім. Івана Пулюя |
Place of the edition/event: | Тернопіль, Україна |
UDC: | 621.921 621.81.004 620.178.16 |
Anahtar kelimeler: | електрометалізаційні покриви порошковий дріт хімічна гетерогенність покривів жаростійкість газоабразивна зносостійкість electric arc sprayed coating flux cored wire chemical heterogeneity of coatings heat resistance gasabrasive wear resistance |
Özet: | Розкрито загальні закономірності впливу хімічної гетерогенності електродугових покривів з порошкових дротів на їх жаростійкість. Показано, що рівень напружень 1-го роду в таких покривах залежить від інтенсивності протікання двох процесів. Перший з них - внутрішнє окиснення, яке збільшує їх об’єм та спричиняє напруження розтягу, а другий – виділення дисперсних фаз, яке зменшує об’єм та викликає у покриві напруження стиску.
Експериментально показано, що газоабразивна зносостійкість покривів з ПД зростає зі збільшенням тривалості їх витримування та з підвищенням температури випроб. Це зумовлено збільшенням твердості покривів за рахунок дисперсійного твердіння та перетворенням залишкових напружень розтягу в покривах у напруження стиску. It was revealed the common relationships of the chemical heterogeneity effect of the electric arc sprayed coating from the flux cored wires on its heat resistance. It was shown that coating stress level varies depending on the intensities of two processes. First of them is internal oxidation, which increases the coating volume, and causes the compressive coating stress. The second one is the separation of dispersed phases, which decreases the coating volume and causes the tension coating stress. It was experimentally shown that gasabrasive wear resistance of coatings from the flux cored wires is increased with increasing of time and temperature of specimen holding at high temperature. It is caused by hardening of coatings due to precipitation hardening and transformation of coating stress level from tension to compressive one. |
URI: | http://elartu.tntu.edu.ua/handle/123456789/778 |
ISSN: | 1727-7108 |
Copyright owner: | © „Вісник Тернопільського національного технічного університету“ |
Publications status : | Опубліковано раніше |
Content type: | Article |
Koleksiyonlarda Görünür: | Вісник ТНТУ, 2010, Том 15, № 4 |
Bu öğenin dosyaları:
DSpace'deki bütün öğeler, aksi belirtilmedikçe, tüm hakları saklı tutulmak şartıyla telif hakkı ile korunmaktadır.