Utilize este identificador para referenciar este registo: http://elartu.tntu.edu.ua/handle/123456789/6145

Título: Optimisation of inductor parameters for uniform heating of discs across the width of the hardfacing zone, allowing for screening
Outros títulos: Оптимизация параметров индуктора для равномерного нагрева дисков по ширине зоны наплавления с учетом экранирования
Оптимізація параметрів індуктора для рівномірного нагріву дисків по ширині зони наплавлення з урахуванням екранування
Autor: Shably, O.M.
Pulka, Ch.V.
Pismenny, A.S.
Шаблій, Олег Миколайович
Пулька, Чеслав Вікторович
Письменний, О.С.
Affiliation: Ivan Pulyuj Ternopil State Technical University, Ternopil, Ukraine
The E.O. Paton Electric Welding Institute, NASU, Kyiv, Ukraine
Bibliographic description (Ukraine): O.M. Shably Ch.V. Pulka and A.S. Pismenny. Optimisation of inductor parameters for uniform heating of discs across the width of the hardfacing zone, allowing for screening. The Paton Welding Journal. 11/2002. P. 23-25.
Is part of: Автоматическая сварка
The Paton Welding Journal
Data: 2002
Date of entry: 7-Nov-2015
Palavras-chave: induction hardfacing
steel discs
optimization of parameters
two-turn ring-type inductors
protective shields
investigations
calculation
Page range: 23-25
Resumo: Method of calculation and optimizing of parameters of inductor for hard facing edges of discs of an arbitrary diameter and width of the hard facing zone with allowance for the effect of electromagnetic and heat screening on the distribution of electromagnetic field power in the hardfacing zone width is presented.
URI: http://elartu.tntu.edu.ua/handle/123456789/6145
References (Ukraine): 1. Tkachev, V.N. (1971) Wear and increase of service life of agricultural machinery. Moscow: Mashinostroenie.
2. Shably, O., Pulka, Ch.V., Pismenny, A. (1997) Optimisation of design parameters of inductor for induction hardfacing of thin steel discs. Avtomatich. Svarka, 6, 17-20.
3. Lozinsky, M.G. (1958) Industrial application of induction heating. Moscow : ANSSSR.
4. Shably, O.M., Pulka, Ch.V., Budzan. B.P. (1987) Optimisation of power inputs during induction hardfacing of thin-walled shaped discs. Avtomatich. Svarka, 1 , 36-39.
Content type: Article
Aparece nas colecções:Наукові публікації працівників кафедри технології та обладнання зварювального виробництва

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
005.pdf2,74 MBAdobe PDFVer/Abrir
005.djvu2,01 MBDjVuVer/Abrir
005__COVER.png1,12 MBimage/pngVer/Abrir
PWJ_2002_11_Pulka_Ch_V__23-25.pdf560,22 kBAdobe PDFVer/Abrir
PWJ_2002_11_Pulka_Ch_V_23-25.djvu196,71 kBDjVuVer/Abrir
PWJ_2002_11_Pulka_Ch_V_23-25__COVER.png426,23 kBimage/pngVer/Abrir


Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.

Ferramentas administrativas