Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: http://elartu.tntu.edu.ua/handle/lib/38564
Назва: Удосконалення технологічного процесу механічного оброблення вала 47.628.007
Інші назви: Improvement of the shaft 47.628.007 machining production process
Автори: Салім, Мохамед Аджаджіі
Saleem, Mohamed Ajajii
Бібліографічний опис: Салім Мохамед Аджаджіі Удосконалення технологічного процесу механічного оброблення валу 47.628.007: кваліфікаційна робота бакалавра за спеціальністю “131 - прикладна механіка” / Мохамед Аджаджіі Салім. – Тернопіль: ТНТУ, 2022. – 42 с.
Дата публікації: 2-лип-2022
Дата подання: 2-лип-2022
Дата внесення: 16-лип-2022
Країна (код): UA
Науковий керівник: Васильків, Василь Васильович
Члени комітету: Пилипець, Оксана Михайлівна
УДК: 621.9
Теми: вал
механічна обробка
технологічний процес
shaft
mechanical processing
technological process
Короткий огляд (реферат): В кваліфікаційній роботі вдосконалено технологію виготовлення валу 47.628.007. В роботі розроблено питання аналізу вала, його призначення, характеристика можливого варіанту виробництва, аналіз застосування технічних засобів. Також проведено попереднє встановлення типу виробництва відносно заданої програми, запропоновано варіанти можливого технологічного процесу, розроблено оптимальний технологічний процес на базі аналізу технологічних властивостей і базових можливостей деталі.
In the qualification work, the manufacturing technology of the 47.628.007 shaft was improved. The work deals with the analysis of the shaft, its purpose, the characteristics of a possible production option, and the analysis of the use of technical means. A preliminary determination of the type of production in relation to the given program was also carried out, options for a possible technological process were proposed, an optimal technological process was developed based on the analysis of the technological properties and basic capabilities of the part.
Зміст: INTRODUCTION 1GENERAL TECHNICAL PART 1.1 Service purpose and characteristics of the shaft47.628.007. Analysis of technical conditions 1.2 Analysis of the manufacturability of the design of the part 1.3 Analysis of the basic manufacturing process of the part 1.4 The relevance of increasing the durability of screw working bodies 1.5 Conclusions and setting of problems for the thesis 2 TECHNOLOGICAL PART 2.1 Selection of the method of obtaining the shaft blank 2.2 Selection of processing methods, technological and measurement bases 2.3 Formation of route-operational technological process of shaft manufacturing 2.4 Selection of cutting, measuring and auxiliary tools 2.5 Determination of machining allowances and dimensions of the shaft blank 2.6 Dimensional analysis of the technological process 2.7 Determination of processing modes and technical time standards 2.8 Conclusions to the section 3 DESIGN PART 3.1 Device for milling the keyway of the shaft 3.2 Development of the design of a chuck with a mechanized drive for a lathe 3.3 Device for controlling end and radial runout of shaft surfaces 3.4 Calculation of an industrial robot grabber 3.5 Conclusions to the section 4 LIFE SAFETY AND FUNDAMENTALS OF LABOR PROTECTION 4.1. Analysis of harmful production factors at the site and measures to eliminate them. 4. 2 Microclimate of the production room 4.3 Characteristics of natural disasters, accidents (catastrophes) and their consequences CONCLUSIONS LIST OF REFERENCES Appendices
URI (Уніфікований ідентифікатор ресурсу): http://elartu.tntu.edu.ua/handle/lib/38564
Власник авторського права: © Салім Мохамед Аджаджіі, 2022
Перелік літератури: 1. Gorbatsevich, AF Course designing in engineering technology:Textbook for high schools / AF Gorbatsevich, VAShkred Izd. 5th - M.: Alliance, 2007. – 256 p. 2. Anuriev, VI Handbook of the designer-machine builder / VI Anuriev. In 3 volumes vol. T.1. Ed. 6 th revision. and additional. - M.: Mechanical Engineering, 1982. - 736 p. 3. Diploma design on technology of machine building / Ed. VV Grandma - Minsk: Higher school, 1979. - 464 p. 4. Dobryansky, SS Technology of mechanical engineering and technological bases of mechanical engineering / SS Dobryansky, VK Frolov, Yu.M. Malafeev, VM Gritsenko - K .: NTUU "KPI", 2007. - 72 p. 5. General machine-building standards of time and cutting modes for standardization of work performed on universal and multi-purpose machine tools with CNC. / Part 2. Rules of cutting modes. - Moscow: Economics, 1990. - 474 p. 6. Gorbatyuk, EO Technology of mechanical engineeringeering. / EO Gorbatyuk, MP Mazur, AS Zenkin, VD Karazey - K.: "New World", 2009. - 360 p. 15. 7. Ilyankov, AI Engineering Technology: Practicum and course design. / AI Ilyankov, V.Yu. Novikov - Moscow: Academy, 2012. - 432 pp. 8. Health and Safety Executive information sheet. Safe use of horizontal boring machines Engineering Information Sheet No. 28 (Revision 1). This document is available at: www.hse.gov.uk/pubns/eis28.pdf. 9. Safety and health in the use of machinery. ILO code of practice Geneva, International Labor Office, Program on Safety and Health at Work and the Environment, 2013. 10. Ibrahim A. Al-Zkeri, MS Finite element modeling of hard turning. The Ohio State University, 2007. 11. Mikell P. Groover. Fundamentals of Modern Manufacturing. Materials, Processes, and Systems. Fifth Edition. John Wiley & Sons, Inc., 2013. 12. Kalpakjian, S., and Schmid SR Manufacturing Processes for Engineering Materials, 6th ed. Pearson Prentice Hall, Upper Saddle River, New Jersey, 2010. 13. Groover, MP Work Systems and the Methods, Measurement, and Management of Work, Pearson Prentice-Hall, Upper Saddle River, New Jersey, 2007. 14. Groover, MP Automation, Production Systems, and Computer Integrated Manufacturing, 3rd ed. Pearson Prentice-Hall, Upper Saddle River, New Jersey, 2008. 15. Boothroyd, G., and Knight, WA Fundamentals of Metal Machining and Machine Tools, 3rd ed. CRC Taylor & Francis, Boca Raton, Florida, 2006. 16. Bakerjian, R. (ed.). Tool and Manufacturing Engineers Handbook. 4th ed. Vol VI, Design for Manufacturability. Society of Manufacturing Engineers, Dearborn, Mich., 1992. 17. Parsai, H., Leep, H., and Jeon, G. The Principles of Group Technology and Cellular Manufacturing, John Wiley & Sons, Hoboken, New Jersey, 2006. 18. A handbook of a technologist-machine builder in 2 volumes of T1. Ed. AG Kosilova and RK Meshcheryakova - 4th ed. Recycled and supplemented - M .: Mashinostroenie, 1986. - 656 p. 19. A handbook of the technologist-machine builder In 2 volumes of T2. Ed. AG Kosilova, RK Meshcheryakova - 4th ed. Recycled and supplemented - M .: Mashinostroenie, 1986. - 496 p. 20. Vasylkiv V., Danylchenko L., Radyk D. Technological methods of workpiece manufacturing. Casting: Manual. Edited by L. Dzhydzhor. Ternopil: Aston, 2021., 205 p. 21. Creatinga 3D model.Study guides for lab classes No. 4 in the "CAM and CAE Systems of Machine Building Production" course.Editors:Vasylkiv V., Danylchenko L., Radyk D. -Ternopil: Ternopil National Ivan Puluj Technical University, 2021. - 40 22. Creating a parametric drawing in the automatic parameterization mode.Study guides for lab classes No. 3 in the "CAM and CAE Systems of Machine Building Production" course.Editors:Vasylkiv V., Danylchenko L., Radyk D. -Ternopil: Ternopil National Ivan Puluj Technical University, 2021. - 28 23. Creating Parametric Drawing.Study guides for lab classes No. 2 in the "CAM and CAE Systems of Machine Building Production" course.Editors:Vasylkiv V., Danylchenko L., Radyk D. -Ternopil: Ternopil National Ivan Puluj Technical University, 2021. - 38 24. Sketching by Non-parametric Drawing.Study guides for lab classes No. 1 in the "CAM and CAE Systems of Machine Building Production" course.Editors:Vasylkiv V., Danylchenko L., Radyk D. -Ternopil: Ternopil National Ivan Puluj Technical University, 2021. - 28 25. Creating a 3D model from a 2D drawing.Study guides for lab classes No. 5 in the "CAM and CAE Systems of Machine Building Production" course.Editors:Vasylkiv V., Danylchenko L., Radyk D. -Ternopil: Ternopil National Ivan Puluj Technical University, 2021. - 39 26. Vasylkiv V., Pylypets M., Danylchenko L., Radyk D. (2021) Use of computer-integrated technologies in training of engineering specialists. In: Ternopil National Ivan Puluj Technical University, Proceedings of the International Conference Advanced Applied Energy and Information Technologies, Ternopil, December 15-17, 2021, pp. 74-80. 27. Vasylkiv V., Danylchenko L. Factors influencing the value of spring back of sheet material in bending. Materials of the International scientific and technical conference "Fundamental and applied problems of modern technologies" to the 100th anniversary of the foundation of the National Academy of Sciences of Ukraine and to the commemoration of Ivan Puluj (100th anniversary from the day of death) (Tern ., 22-24 May 2018), pp. 84-85.
Тип вмісту: Bachelor Thesis
Розташовується у зібраннях:131 — Прикладна механіка (бакалаври)

Файли цього матеріалу:
Файл Опис РозмірФормат 
Diplom_Saleem_Mohamed_Ajajii_2022.pdf909,12 kBAdobe PDFПереглянути/відкрити


Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.

Інструменти адміністратора