Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam: http://elartu.tntu.edu.ua/handle/123456789/6723

Název: Вплив неврівноваженості молотильного барабана зернозбирального комбайна на його коливання
Další názvy: Influence of threshing drum's disbalance in combine harvester on its vibration
Autoři: Ловейкін, В’ячеслав Сергійович
Човнюк, Юрій Васильович
Ляшко, Анастасія Петрівна
Lovejkin, V.
Chovnjuk, Y.
Lyashko, A.
Bibliographic description (Ukraine): Ловейкін В. С. Вплив неврівноваженості молотильного барабана зернозбирального комбайна на його коливання / В. С. Ловейкін, Юрій Васильович Човнюк, Анастасія Петрівна Ляшко // Вісник ТНТУ, — Т. : ТНТУ, 2015 — Том 79. — № 3. — С. 123-130. — (Машинобудування, автоматизація виробництва та процеси механічної обробки).
Bibliographic description (International): Lovejkin V., Chovnjuk Y., Lyashko A. (2015) Vplyv nevrivnovazhenosti molotylnoho barabana zernozbyralnoho kombaina na yoho kolyvannia [Influence of threshing drum's disbalance in combine harvester on its vibration]. Bulletin of TNTU (Tern.), vol. 79, no 3, pp. 123-130 [in Ukrainian].
Is part of: Вісник Тернопільського національного технічного університету
Bulletin of Ternopil National Technical University
Datum vydání: 20-říj-2015
Submitted date: 22-kvě-2015
Date of entry: 24-pro-2015
Nakladatel: ТНТУ
TNTU
Place of the edition/event: Україна, Тернопіль
Ukraine, Ternopil
UDC: 631.361.022
Klíčová slova: молотильний барабан
вертикальне переміщення
кут повороту
амплітуда
threshing drum
vertical displacement
angle
oscillatory amplitude
Page range: 123-130
Abstrakt: Приведено дослідження неврівноваженості молотильного барабана зернозбирального комбайна. Виведено рівняння зміни коливань вертикального переміщення центру мас барабана та кута повороту барабана навколо центру мас, а також побудовано графіки цих коливань. Досліджено вплив зміни неврівноваженої маси, жорсткості опор та відстані між площиною неврівноваженої маси і площиною центру мас на амплітуду коливань вертикального переміщення центру мас та кута повороту.
In this paper research of threshing drum’s disbalance in combine harvester is presented. Modern threshing drum of tangential type in combine harvester are made open. Central and extreme disks are mounted on the cylinder shaft. Bars or rasp bars are mounted on disks. This construction of threshing drum makes possible falling of grain, plant residues, powder and soil into the threshing drum. All this results in the imbalance of threshing drum and the emergence of oscillation. The oscillation is transmitted to the bearings and hull of combine harvester. These oscillations lead to reduced reliability rate of combine harvester, and also to reduce threshing quality of grain crops. In this paper oscillation equation of threshing drum system is solved. The free oscillation equations of threshing drum are shown. Equations of oscillation’ change vertical centroidal displacement and shaft rotation angle of threshing drum are derived. The oscillation’ graph of change vertical centroidal displacement and shaft rotation angle of threshing drum for different unbalanced mass, different stiffness of left and right carriage and for different placement unbalanced mass. It was considered that unbalanced mass can be placed on the left, center and right beater in bars of threshing drum. In this article we reviewed at an example, where an unbalanced mass on a single stick of bars in threshing drum of combine harvester. All of graphs are plottedfjr combine harvester KZS-9-1 «Slavutych» with characteristic І=13,64 kg∙m3, m=200 kg, ρ1=0,3 m; ω=85,7 rad/s. The unbalance mass is changed from 100 g to 500 g. The stiffness of left and right carriage is changed from 100000 Nm 145000 Nm. The impact of change of input parameters for oscillatory amplitude is researched. It was found that the stiffness of left and right carriage reduce oscillations of vertical centroidal displacement and shaft rotation angle of threshing drum in combine harvester. Increase of an unbalanced mass or characteristic a1 increases the forced oscillations of vertical centroidal displacement and shaft rotation angle of threshing drum in combine harvester.
URI: http://elartu.tntu.edu.ua/handle/123456789/6723
ISSN: 1727-7108
Copyright owner: © Вісник Тернопільського національного технічного університету, 2015
References (Ukraine): 1. Липкович, Э.И. Процессы обмолота и сепарации в молотильных аппаратах зерноуборочных комбайнов [Текст] / Э.И. Липкович. – Зерноград: 1973. – 166 с.
2. Алферов, С.А Исследование динамики привода зерноуборочного комбайна [Текст] / С.А. Алферов // Сб. трудов по земледельческой механике – М.: Сельхозгиз, 1966. – Т. IX. – С. 4 – 21.
3. Липкович, Э.И. Аналитические основы исследования процесса обмолота и сепарации зерна молотильным аппаратом зерноуборочного комбайна [Текст] / Э.И. Липкович // Сб. трудов по земледельческой механике. – М.: Сельхозгиз, 1971. – Т. XII. – С.225 – 236.
4. Грек, А.И. Вопросы Обмолота [Текст] / А.И. Грек. – Владивосток: Дальневосточное книжное издательство, 1970. – 204 с.
5. Influence of inertia momentum of cylinder on power consumption during corn ear threshing / Dainius Steponavicius, Vidmantas Butkus, Valdas Kiniulis, Tautvydas Karitonas, Laimis Bausa, Edvinas Puzauskas // 12th International Scientific Conference engineering for rural development Proceedings, Volume 12 May 23-24, 2013 – pp. 66 – 72.
6. Богус, Ш.Н. Анализ и синтез молотильно-сепарирующих устройств рисозерноуборочных комбайнов [Текст]; дис. докт.техн.наук – Краснодар, 2005.
7. Impact of technological parameters of threshing apparatus on grain damage / L. Špokas, D. Steponavičius, S. Petkevičius // Agronomy Research 6 (Special issue), 2008 – pp. 367 – 376.
8. Гробов, В.А. Теория колебаний механических систем [Текст] / В.А. Гробов. – К.: Вища школа, 1982. – 183 с.
References (International): 1. Lipkovich, E.I. Protsessy obmolota i separatsii v molotilnykh apparatakh zernouborochnykh kombainov [Text], E.I. Lipkovich, Zernohrad: 1973, 166 p.
2. Alferov, S.A Issledovanie dinamiki privoda zernouborochnoho kombaina [Text], S.A. Alferov, Sb. trudov po zemledelcheskoi mekhanike – M., Selkhozhiz, 1966, T. IX, P. 4 – 21.
3. Lipkovich, E.I. Analiticheskie osnovy issledovaniia protsessa obmolota i separatsii zerna molotilnym apparatom zernouborochnoho kombaina [Text], E.I. Lipkovich, Sb. trudov po zemledelcheskoi mekhanike, M., Selkhozhiz, 1971, T. XII, P.225 – 236.
4. Hrek, A.I. Voprosy Obmolota [Text], A.I. Hrek, Vladivostok: Dalnevostochnoe knizhnoe izdatelstvo, 1970, 204 p.
5. Influence of inertia momentum of cylinder on power consumption during corn ear threshing, Dainius Steponavicius, Vidmantas Butkus, Valdas Kiniulis, Tautvydas Karitonas, Laimis Bausa, Edvinas Puzauskas, 12th International Scientific Conference engineering for rural development Proceedings, Volume 12 May 23-24, 2013 – pp. 66 – 72.
6. Bohus, Sh.N. Analiz i sintez molotilno-separiruiushchikh ustroistv risozernouborochnykh kombainov [Text]; dis. dokt.tekhn.nauk – Krasnodar, 2005.
7. Impact of technological parameters of threshing apparatus on grain damage, L. Špokas, D. Steponavičius, S. Petkevičius, Agronomy Research 6 (Special issue), 2008 – pp. 367 – 376.
8. Hrobov, V.A. Teoriia kolebanii mekhanicheskikh sistem [Text], V.A. Hrobov, K., Vishcha shkola, 1982, 183 p.
Content type: Article
Vyskytuje se v kolekcích:Вісник ТНТУ, 2015, № 3 (79)



Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.