Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: http://elartu.tntu.edu.ua/handle/123456789/5960

Назва: Diagnostics of degradation of surfaces treated by thermal spraying
Автори: Greš, M.
Brezinová, J.
Guzanová, A.
Приналежність: Technical University of Košice, Faculty of Mechanical Engineering, Košice, Slovakia
Бібліографічний опис: Diagnostics of degradation of surfaces treated by thermal spraying / M. Landová, M. Greš, J. Brezinová, A. Guzanová // IV міжнародна науково-технічна конференція „Пошкодження матеріалів під час експлуатації, методи його діагностування і прогнозування“ — Тернопіль : Вид-во ТНТУ імені Івана Пулюя, 2015. — С. 70-73. — (Діагностування пошкоджень).
Bibliographic description: Landová M., Greš M., Brezinová J., Guzanová A. Diagnostics of degradation of surfaces treated by thermal spraying. International Conference "In-Service Damage of Materials, its Diagnostics and Prediction", Ternopil, TNTU, 2015, P. 70-73 [in English].
Є частиною видання: Матеріали IV міжнародної науково-технічної конференції „Пошкодження матеріалів під час експлуатації, методи його діагностування і прогнозування“
Дата публікації: 21-вер-2015
Дата внесення: 28-жов-2015
Видавництво: Вид-во ТНТУ імені Івана Пулюя
Місце видання, проведення: Тернопіль
Ternopil
Діапазон сторінок: 70-73
Короткий огляд (реферат): The paper deals with possibilities of utilization HVOF coatings in thermal cyclic loading and wear conditions. There were evaluated three types of coatings based on WC-Co, WC-Co-Cr and Cr3C2-25NiCr. The quality of coatings was evaluated in terms of their adhesion during the cyclic thermal loading (pull-off test), microhardness and wear resistance (pin-on-disc test). Structure of coatings was studied using optical and electron microscopy. The coating Cr3C2-25NiCr showed the highest resistance to thermal cycles and wear resistance at 900°C and can be recommended for renovation components stressed by high and cyclic temperatures and wear.
URI (Уніфікований ідентифікатор ресурсу): http://elartu.tntu.edu.ua/handle/123456789/5960
Власник авторського права: © Тернопільський національний технічний університет імені Івана Пулюя, 2015
Перелік літератури: 1. M. Li, P. D. Christofides, Chem. Eng. Sci. 61 (2006) 6540-6552.
2. T. Sahraoui, S. Guessasma, , N.E. Fenineche, G. Montavon, C. Coddet, Mater. Lett. 58 (2004) 654-660.
3. R. J. K. Wood, Int. J. Refract. Met. Hard Mater. 28 (2010) 82-94.
4. L. Thakur, N. Arora, R. Jayaganthan, R. Sood, Appl. Surf. Sci. 258 (2011) 1225-1234.
5. W. Žórawski, Surf. Coat. Technol. 220 (2013) 276-281.
6. T. Sahraoui, S. Guessasma, M. A. Jeridane, M. Hadji, Mater. Des. 31 (2010) 1431 – 1437.
7. V.A.D. Souza, A. Neville, Wear 259 (2005) 171-180.
References: 1. M. Li, P. D. Christofides, Chem. Eng. Sci. 61 (2006) 6540-6552.
2. T. Sahraoui, S. Guessasma, , N.E. Fenineche, G. Montavon, C. Coddet, Mater. Lett. 58 (2004) 654-660.
3. R. J. K. Wood, Int. J. Refract. Met. Hard Mater. 28 (2010) 82-94.
4. L. Thakur, N. Arora, R. Jayaganthan, R. Sood, Appl. Surf. Sci. 258 (2011) 1225-1234.
5. W. Žórawski, Surf. Coat. Technol. 220 (2013) 276-281.
6. T. Sahraoui, S. Guessasma, M. A. Jeridane, M. Hadji, Mater. Des. 31 (2010) 1431 – 1437.
7. V.A.D. Souza, A. Neville, Wear 259 (2005) 171-180.
Тип вмісту: Article
Розташовується у зібраннях:Конференція „Пошкодження матеріалів під час експлуатації, методи його діагностування і прогнозування“ (2015)



Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.