Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: http://elartu.tntu.edu.ua/handle/123456789/5892

Назва: Неруйнівний контроль і діагностування підшипників кочення
Інші назви: Undestroying control and diagnostics of rolling bearings
Автори: Averyanov, V.
Бібліографічний опис: Авер’янов В. С. Неруйнівний контроль і діагностування підшипників кочення / Володимир Сергійович Авер’янов // Вісник ТНТУ — Тернопіль : ТНТУ, 2015. — Том 77. — № 1. — С. 142-149. — (Машинобудування, автоматизація виробництва та процеси механічної обробки).
Bibliographic description: Averyanov V. Undestroying control and diagnostics of rolling bearings / V. Averyanov // Bulletin of TNTU — Ternopil : TNTU, 2015. — Volume 77. — No 1. — P. 142-149. — (Manufacturing engineering and automated processes).
Дата публікації: 24-бер-2015
Дата внесення: 29-вер-2015
Видавництво: Тернопiльський національний технiчний унiверситет iменi Iвана Пулюя
Місце видання, проведення: Тернопіль
УДК: 621.129.12
Теми: діагностування
підшипники
ультразвуковий метод
неруйнівний контроль
diagnostics
bearings
ultrasonic method
undestroying control
Короткий огляд (реферат): Проведено аналіз методів неруйнівного контролю, що забезпечують ефективне оцінювання технічного стану підшипників кочення під час їх експлуатації. Детально розглянуто сучасні методи ультразвукового оцінювання технічного стану підшипників кочення: Пік-чинника, прямого спектра, спектра огинаючих і ударних імпульсів.
Rolling bearings are the most widespread and the most vulnerable element of any mechanism. They carry out the spatial fixing of the revolved details and are subject to main static and dynamic efforts arising in a mechanism. Therefore the technical condition of bearings is a major constituent determining the capacity of mechanism on the whole. To prolong the operating life and reliability of equipment, decrease of the expenses for maintenance and idle time, the system of the exact diagnosing of current technical condition of rolling bearings is needed. Because of that the methods of control and diagnostics, being based on measuring of parameters of vibration have become vary popular. It is caused by the fact, that vibration signals carry in themselves information about the state of mechanism, bearings in particular. A theory and practice of analysis of vibration signal is so well studied, that it is possible to obtain reliable information about current technical condition of not only a bearing, but its elements as well. The practical tasks of diagnostics of rolling bearings in the process of their operation deal, as a rule, with one of three basic methods. The algorithms of discovery the defects of temperature growth of the bearing unit are used in the first, in the second – appearance the products of wear in lubrication and in the third – the change of properties of vibration (noise). The most complete and detailed diagnostics of bearings with the discovery and identification of defects at the early stage of their development is executed on the signal of bearing vibration, mainly, high-frequency. Rolling bearing is the source of forces of two basic kinds – kinematics and forces of friction. Sometimes the third type of forces appears – shock type. The analysis of methods of undestroying control which provide efficient estimation of the technical condition of rolling bearings during their operation have been carried out in the article. The modern methods of ultrasonic estimation of the technical condition of rolling bearings are considered in details: Peak-factor, direct spectrum, spectrum of rounding and shock impulses.
URI (Уніфікований ідентифікатор ресурсу): http://elartu.tntu.edu.ua/handle/123456789/5892
ISSN: 1727-7108
Власник авторського права: © „Вісник Тернопільського національного технічного університету“
Перелік літератури: 1. Мартыновский, В.А. Использование спектра огибающей высокочастотной вибрации для диагностики подшипников качения [Текст] / В.А. Мартыновский // Техническая диагностика и неразрушающий контроль. – 2002. – No3. – С.17–22.
2. Горбунов, А.Г. Диагностика технического состояния подшипниковых узлов [Текст] / А.Г. Горбунов // Труды ВНИИЭМ. – 2000. – No2. – С.54–60.
3. Шипулин, М.А. Восстановление полимер-полимерной композицией и неразрушающий контроль подшипников качения сельскохозяйственной техники [Текст] / Р.И. Ли, А.В. Бутан, М.А. Шипулин // Вестник МичГАУ. – 2010. – No1. – С.181–185.
4. Коварский, Е.М. Ударно-импульсный метод диагностики начального разрушения подшипников качения [Текст] / Е.М. Коварский, В.М. Малыгин, А.Г. Горбунов // Электроника. – 1991. – No1. – С.57–59.
5. Савицкий, С.С. Методы и средства неразрушающего контроля [Текст] / С.С. Савицкий. – Минск: БНТУ, 2012. – 183 с.
6. Барков, А.В. Мониторинг и диагностика роторных машин по вибрации [Текст] / А.В. Барков, Н.А. Баркова, А.Ю. Азовцев. – СПб.: АО ВАСТ, 2007. – 125 с.
7. Азовцев, А.Ю. Новое поколение систем диагностики и прогнозирования технического состояния [Текст] / А.Ю. Азовцев, А В. Барков. – СПб.: АО ВАСТ, 2004. – 208 с.
References: 1. Martynovskii, V.A. Ispolzovanie spektra ohibaiushchei vysokochastotnoi vibratsii dlia diahnostiki podshipnikov kacheniia [Text] / V.A. Martynovskii // Tekhnicheskaia diahnostika i nerazrushaiushchii kontrol. – 2002. – No3. – P.17–22.
2. Horbunov, A.H. Diahnostika tekhnicheskoho sostoianiia podshipnikovykh uzlov [Text] / A.H. Horbunov // Trudy VNIIEM. – 2000. – No2. – P.54–60.
3. Shipulin, M.A. Vosstanovlenie polimer-polimernoi kompozitsiei i nerazrushaiushchii kontrol podshipnikov kacheniia selskokhoziaistvennoi tekhniki [Text] / R.I. Li, A.V. Butan, M.A. Shipulin // Vestnik MichHAU. – 2010. – No1. – P.181–185.
4. Kovarskii, E.M. Udarno-impulsnyi metod diahnostiki nachalnoho razrusheniia podshipnikov kacheniia [Text] / E.M. Kovarskii, V.M. Malyhin, A.H. Horbunov // Elektronika. – 1991. – No1. – P.57–59.
5. Savitskii, S.S. Metody i sredstva nerazrushaiushcheho kontrolia [Text] / S.S. Savitskii. – Minsk: BNTU, 2012. – 183 p.
6. Barkov, A.V. Monitorinh i diahnostika rotornykh mashin po vibratsii [Text] / A.V. Barkov, N.A. Barkova, A.Iu. Azovtsev. – SPb.: AO VAST, 2007. – 125 p.
7. Azovtsev, A.Iu. Novoe pokolenie sistem diahnostiki i prohnozirovaniia tekhnicheskoho sostoianiia [Text] / A.Iu. Azovtsev, A V. Barkov. – SPb.: AO VAST, 2004. – 208 p.
Тип вмісту: Article
Розташовується у зібраннях:Вісник ТНТУ, 2015, № 1 (77)



Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.