Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: http://elartu.tntu.edu.ua/handle/123456789/5727

Назва: Розвиток пластичних зон у смузі з кутовими точками під дією зосередженої сили
Інші назви: Development of plastic areas in angle points zone under concentrated force
Автори: Валяшек, Володимир Богданович
Кривень, Василь Андрійович
Каплун, Андрій Володимирович
Boyko, A.
Valiashek, V.
Kryven, V.
Kaplun, A.
Бібліографічний опис: Розвиток пластичних зон у смузі з кутовими точками під дією зосередженої сили / А. Бойко, В. Валяшек, В. Кривень, А. Каплун // Вісник ТНТУ — Тернопіль : ТНТУ, 2014. — Том 76. — № 4. — С. 34-43. — (Механіка та матеріалознавство).
Bibliographic description: Development of plastic areas in angle points zone under concentrated force / A. Boyko, V. Valiashek, V. Kryven, A. Kaplun // Bulletin of TNTU — Ternopil : TNTU, 2014. — Volume 76. — No 4. — P. 34-43. — (Mechanics and materials science).
Дата публікації: 18-гру-2014
Дата внесення: 15-лип-2015
Видавництво: Тернопiльський національний технiчний унiверситет iменi Iвана Пулюя
Місце видання, проведення: Тернопіль
УДК: 539.375
Теми: антиплоска деформація
пластична смуга
кутова точка
конформне відображення
задача Келдиша-Сєдова
anti-plane deformation
plastic zone
angular point
conformal mapping (angle diagram)
Keldysh-Sedov problem
Короткий огляд (реферат): Отримано аналітичний розв’язок антиплоскої пружно-пластичної задачі про розвиток пластичних шарів для ідеально пружно-пластичної смуги з кутовими точками на її межі. Знайдено довжину пластичних шарів залежно від величини зосередженої сили, прикладеної на великій відстані від вершин кутів. Визначено критичне навантаження, за якого настає пластичне руйнування смуги.
Investigations of plastic areas in the strain concentrators threshold is still the main problem of solid body mechanics and fracture mechanics. They are important because of wide introduction into engineering practice high-plastic materials with high fracture toughness in which while operating considerable plastic deformation can occur. Analytical solution of anti-plane elasto-plastic problem for the ideal elasto-plastic area with angular points on its edges was obtained. Plastic deformations are considered to be localized in the layers of zero thickness on the notch angles bisectrices. The length of plastic layers as the function of concentrated force applied in great distance from angle apexes was found. Maximum load value was found under which the layers coincide, developing from the opposite notch tips and the area loses its load resistance. The less is the angle on notch tips, the less is maximum load. When the notch angle equals zero (the notch changes into mathematical section) it is minimum and equals 78% of the critical load for smooth zone. When the angle value in notch tips approaches its maximum acceptable value 90°, under which angular points disappear and zone edges become smooth, plastic areas gradually disappear as well and stress-strained state gradually becomes homogeneous. Simple formulae for the plastic layer lengths dependence on loading according to the plastic area linear model (PALM) were reduced. Their analysis testified the high accuracy of this model. For steel 0,3X14H7B with shearing yield limit 688 mPa the PALM will provide accuracy not less than 5% until the average shearing load in the zone cross-section does not exceed 75,5 mPa. Carried out investigations consider the case of maximum possible interaction of stress concentrators – the distance between concentrators in infinitely small in comparison with their dimensions. As concentrators interaction decreases the plastic area linear model accuracy, it is reasonable to consider the obtained estimations of accuracy to be the highest and not to be decreased under weaker interactions.
URI (Уніфікований ідентифікатор ресурсу): http://elartu.tntu.edu.ua/handle/123456789/5727
ISSN: 1727-7108
Власник авторського права: © „Вісник Тернопільського національного технічного університету“
Перелік літератури: 1. Саврук, М.П. Концентрація напружень у твердих тілах з вирізами. Механіка руйнування та міцність матеріалів. Довідн. пос. [Текст] / М.П. Саврук, А. Казберук; за заг. ред. В.В. Панасюка. – Львів.: Сполом, 2012. – Т. 14. – 384 с.
2. Сулим, Г.Т. Основи математичної теорії термопружної рівноваги деформівних твердих тіл з тонкими включеннями: монографія. Сулим Г.Т. – Львів.: Дослідно-видавничий центр НТШ, 2007. – 716 с.
3. Berto, F. Induced out-of-plane mode at the tip of blunt lateral notches and holes under in-plane shear loading. Fatigue and Fracture of Engineering [Text] / F. Berto, P. Lazzarin, A. Kotousov, L. Pook. – Materials and Structures, 2012, Vol.35. – P.538–555.
4. Lazzarin, P. A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches [Text] / P. Lazzarin, R. Zambardi. – International Journal of Fracture. 2001, Vol.15 – P.275–298.
5. Berto, F. A review of the volume-based strain energy density approach applied to V-notches and welded structures [Text] / F. Berto, P. Lazzarin. – Theoretical and Applied Fracture Mechanics, 2009, Vol. 52. – P.183– 194.
6. Zappalorto, M. Analytical study of the elastic–plastic stress fields ahead of parabolic notches under antiplane shear loading [Text] / M. Zappalorto, P. Lazzarin. – Int J Fract, 2007, Vo1. 48. – P.139–154.
7. Kryven, V.A. Development of plastic zones in a body with a rectangular slot under antiplane deformation [Text] / V.A. Kryven, V.B. Valiashek, M.I.Yavorska/ – Material science, 2008, No 4. – P.792–798.
8. Plastic Exfoliation of a Rigid Rectangular Inclusion Under the Action of Concentrated Forces [Text] / V.A. Kryven’, M.I. Yavors’ka, A.V. Kaplun, V.B. Valiashek.– Journal of Mathematical Sciences, 2014, No.2. – P.119–131.
9. Kryven’, V.А. Initial stage of plastic exfoliation of a rectangular inclusion under conditions of one-sided contact with a medium [Text] / V.А. Kryven’, V.B. Valіashek. – Journal of Mathematical Sciences, 2010, Vol.171, No. 4. – P107–116.
10. Kryven’, V.A. Antiplane problem for an elastic perfectly plastic body with biperiodic system of rhombic notches [Text] / V.A. Kryven’. – Materials Science, 2001, Vol.37, No6. – P.866–872.
11. Lazzarin, P. Plastic notch stress intensity factors for pointed V-notches under antiplane shear loading [Text] / P. Lazzarin, M. Zappalorto. – Int J Fract, 2008, No1. – P.1–25.
12. Иванов, В.И. Конформные отображения и их приложения [Текст] / В.И. Иванов, В.Ю. Попов – М.: Едиториал УРСС, 2002 – 324с.
13. Кривень, В.А. Лінійна модель пластичної зони біля гострокінцевого концентратора напружень за поздовжнього зсуву [Текст] / В.А. Кривень. – Фіз.-хім. механіка матеріалів, 2004, No4. – С.41–46.
14. Крывень, В.А. Непрерывное и разрывное решения упругопластической задачи об антиплоской деформации тела с трещиной [Текст] / В.А. Крывень – Физ.-хим. механика материалов, 1985. – No6. – С.10–16.
References: 1. Savruk, M.P. Kontsentratsiia napruzhen u tverdykh tilakh z vyrizamy. Mekhanika ruinuvannia ta mitsnist materialiv. Dovidn. pos. [Text] / M.P. Savruk, A. Kazberuk; by gen. ed. V.V. Panasiuka. – Lviv.: Spolom, 2012. – V. 14. – 384 p.
2. Sulym, H.T. Osnovy matematychnoi teorii termopruzhnoi rivnovahy deformivnykh tverdykh til z tonkymy vkliuchenniamy: monograph. Sulym H.T. – Lviv.: Doslidno-vydavnychyi tsentr NTSh, 2007. – 716 p.
3. Berto, F. Induced out-of-plane mode at the tip of blunt lateral notches and holes under in-plane shear loading. Fatigue and Fracture of Engineering [Text] / F. Berto, P. Lazzarin, A. Kotousov, L. Pook. – Materials and Structures, 2012, Vol.35. – P.538–555.
4. Lazzarin, P. A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches [Text] / P. Lazzarin, R. Zambardi. – International Journal of Fracture. 2001, Vol.15 – P.275–298.
5. Berto, F. A review of the volume-based strain energy density approach applied to V-notches and welded structures [Text] / F. Berto, P. Lazzarin. – Theoretical and Applied Fracture Mechanics, 2009, Vol. 52. – P.183– 194.
6. Zappalorto, M. Analytical study of the elastic–plastic stress fields ahead of parabolic notches under antiplane shear loading [Text] / M. Zappalorto, P. Lazzarin. – Int J Fract, 2007, Vo1. 48. – P.139–154.
7. Kryven, V.A. Development of plastic zones in a body with a rectangular slot under antiplane deformation [Text] / V.A. Kryven, V.B. Valiashek, M.I.Yavorska/ – Material science, 2008, No 4. – P.792–798.
8. Plastic Exfoliation of a Rigid Rectangular Inclusion Under the Action of Concentrated Forces [Text] / V.A. Kryven’, M.I. Yavors’ka, A.V. Kaplun, V.B. Valiashek.– Journal of Mathematical Sciences, 2014, No.2. – P.119–131.
9. Kryven, V.A. Initial stage of plastic exfoliation of a rectangular inclusion under conditions of one-sided contact with a medium [Text] / V.A. Kryven, V.B. Valiashek. – Journal of Mathematical Sciences, 2010, Vol.171, No. 4. – P107–116.
10. Kryven’, V.A. Antiplane problem for an elastic perfectly plastic body with biperiodic system of rhombic notches [Text] / V.A. Kryven’. – Materials Science, 2001, Vol.37, No6. – P.866–872.
11. Lazzarin, P. Plastic notch stress intensity factors for pointed V-notches under antiplane shear loading [Text] / P. Lazzarin, M. Zappalorto. – Int J Fract, 2008, No1. – P.1–25.
12. Ivanov, V.I. Konformnye otobrazheniia i ikh prilozheniia [Text] / V.I. Ivanov, V.Iu. Popov – M.: Editorial URSS, 2002 – 324p.
13. Kryven, V.A. Liniina model plastychnoi zony bilia hostrokintsevoho kontsentratora napruzhen za pozdovzhnoho zsuvu [Text] / V.A. Kryven. – Fiz.-khim. mekhanika materialiv, 2004, No4. – P.41–46.
14. Kryven, V.A. Nepreryvnoe i razryvnoe resheniia upruhoplasticheskoi zadachi ob antiploskoi deformatsii tela s treshchinoi [Text] / V.A. Kryven – Fiz.-khim. mekhanika materialov, 1985. – No6. – P.10–16.
Тип вмісту: Article
Розташовується у зібраннях:Вісник ТНТУ, 2014, № 4 (76)



Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.