Utilizza questo identificativo per citare o creare un link a questo documento:
http://elartu.tntu.edu.ua/handle/123456789/2021
Titolo: | Особливості спікання твердих сплавів на полікарбідній основі |
Titoli alternativi: | Features of the sintering of polycarbide based hard alloys |
Autori: | Бодрова, Людмила Гордіївна Крамар, Галина Михайлівна Мариненко, Сергій Юрійович Bodrova, L. Kramar, H. Marynenko, S. |
Bibliographic description (Ukraine): | Бодрова Л. Особливості спікання твердих сплавів на полікарбідній основі / Бодрова Л., Крамар Г., Мариненко С. // Вісник ТНТУ. — 2012. — Том 65. — № 1. — С.26-35. — (механіка та матеріалознавство). |
Data: | 24-gen-2012 |
Date of entry: | 12-apr-2013 |
Editore: | Тернопільський національний технічний університет ім. Івана Пулюя |
Place of the edition/event: | Тернопіль, Україна |
UDC: | 669.018.25 |
Parole chiave: | тверді сплави на полікарбідній основі спікання активація кінетичні параметри механізми спікання polycarbide based hard alloys sintering activation kinetic parameters sintering mechanisms |
Abstract: | Досліджено вплив карбіду вольфраму на кінетичні параметри процесу спікання твердих сплавів TiC-5VC-5NbC-xWC-yNiCr, де x=5,10,15% (мас.), y=10,18,24% (мас.) (Ni:Cr = 3:1). Показано, що процес спікання твердих сплавів на основі TiC, VC, NbC, з NiCr зв’язкою можна активувати шляхом введення WC у кількості не більше 5% (мас.). Встановлено механізми масопереносу на різних стадіях процесу спікання. The influence of tungsten carbide on the kinetic parameters of the process of sintering of TiC-5VC-5NbC-xWC-yNiCr hard alloys, where x=5, 10, 15% (mass.), y=10, 18, 24% (mass.) (Ni:Cr=3:1) is researched in this paper. It is shown that the process of sintering of TiC, VC, NbC based hard alloys with NiCr binder may be activated by the introduction of WC in quantity of no more than 5% (mass.). The mass transfer mechanisms on different stages of the sintering process are established. |
URI: | http://elartu.tntu.edu.ua/handle/123456789/2021 |
ISSN: | 1727-7108 |
Copyright owner: | © „Вісник Тернопільського національного технічного університету“ |
Publications status : | Опубліковано раніше |
Content type: | Article |
È visualizzato nelle collezioni: | Вісник ТНТУ, 2012, № 1 (65) |
File in questo documento:
Tutti i documenti archiviati in DSpace sono protetti da copyright. Tutti i diritti riservati.