<?xml version="1.0" encoding="UTF-8"?>
<feed xmlns="http://www.w3.org/2005/Atom" xmlns:dc="http://purl.org/dc/elements/1.1/">
  <title>DSpace Зібрання: Ⅴ Міжнародна науково-технічна конференція „Пошкодження матеріалів під час експлуатації, методи його діагностування і прогнозування“ (Тернопіль, 19-22 вересня 2017 року)</title>
  <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21954" />
  <subtitle>Ⅴ Міжнародна науково-технічна конференція „Пошкодження матеріалів під час експлуатації, методи його діагностування і прогнозування“ (Тернопіль, 19-22 вересня 2017 року)</subtitle>
  <id>http://elartu.tntu.edu.ua/handle/lib/21954</id>
  <updated>2026-04-10T14:52:46Z</updated>
  <dc:date>2026-04-10T14:52:46Z</dc:date>
  <entry>
    <title>Визначення вібродіагностичних показників наявності тріщини в пері лопатки з дихаючою тріщиною нормального відриву на вихідній кромці при основному, супер- та субгармонічному резонансах</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22612" />
    <author>
      <name>Онищенко, Є. О.</name>
    </author>
    <author>
      <name>Зіньковський, А. П.</name>
    </author>
    <author>
      <name>Круц, В. О.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22612</id>
    <updated>2017-12-07T16:03:00Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Визначення вібродіагностичних показників наявності тріщини в пері лопатки з дихаючою тріщиною нормального відриву на вихідній кромці при основному, супер- та субгармонічному резонансах
Автори: Онищенко, Є. О.; Зіньковський, А. П.; Круц, В. О.
Короткий огляд (реферат): The paper presents the results of numerical investigations on the determination of mechanisms of influence of the parameters of the breathing fatigue crack of the opening mode on the flexural vibration characteristics of the aircraft gas-turbine engine blade airfoil portion. The relations between the amplitudes of dominant harmonics of displacements and accelerations at principal, super- and subharmonic resonances are considered as the vibration diagnostic factors
indicating the presence of a crack</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Оцінка умов руйнування тривалоексплуатованих газопроводів</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22610" />
    <author>
      <name>Грабовський, Р. С.</name>
    </author>
    <author>
      <name>Мазур, Мирослав Павлович</name>
    </author>
    <author>
      <name>Хабінський, В.</name>
    </author>
    <author>
      <name>Грицанчук, А. В.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22610</id>
    <updated>2017-12-07T16:02:08Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Оцінка умов руйнування тривалоексплуатованих газопроводів
Автори: Грабовський, Р. С.; Мазур, Мирослав Павлович; Хабінський, В.; Грицанчук, А. В.
Короткий огляд (реферат): For long-term operation of main oil and gas pipeline steels the technique of deterring the
critical crack growth resistance of pipeline steels by investigation using experimentally obtained 
diagram of "force-deflection" samples destruction was suggested. The sizes of through critical 
cracks have been calculated and the initial sizes and the shape of crack-like defects for the 
investigated main gas and oil pipelines were evaluated. The obtained data can serve as a basis for 
the interpreting detected crack-like defects during technical diagnostics</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Стохастические закономерности множественного разрушения твердых тел</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22611" />
    <author>
      <name>Игнатович, С. Р.</name>
    </author>
    <author>
      <name>Краснопольский, В. С.</name>
    </author>
    <author>
      <name>Кравченко, А. Д.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22611</id>
    <updated>2017-12-07T16:02:38Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Стохастические закономерности множественного разрушения твердых тел
Автори: Игнатович, С. Р.; Краснопольский, В. С.; Кравченко, А. Д.
Короткий огляд (реферат): This paper proposes the model of crack length probability distribution, obtained on the basis of experimental data on the formation and growth of fatigue cracks. The density of this distribution corresponds to the Pareto’s power law. It is shown that the Pareto distribution can be used to describe the accumulation of scattered defects in a wide range of cracking scale levels.
Critical values of the Pareto’s distribution exponent are validated. These values correspond to the limiting states of solids multiple destruction.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Оцінка втомної довговічності з урахуванням мікроструктури, концентрації напружень та асиметрії циклу навантаження</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22609" />
    <author>
      <name>Герасимчук, О.</name>
    </author>
    <author>
      <name>Кононученко, О.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22609</id>
    <updated>2017-12-07T16:01:42Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Оцінка втомної довговічності з урахуванням мікроструктури, концентрації напружень та асиметрії циклу навантаження
Автори: Герасимчук, О.; Кононученко, О.
Короткий огляд (реферат): A model is proposed for the fatigue life estimation of the material taking into account microstructure, stress concentration and asymmetry of constant load cycle. The model is tested for the results of fatigue testing specimens of Ti–6Al–4V titanium alloy condensate prepared by electron-beam physical vapor deposition method (EB PVD-method). The specimens had manufacturing defects, such as column defects of different diameters reaching the specimen surface.
The model is also tested for the experimental fatigue data of Ti–6Al–4V titanium alloy taken from the literature for various asymmetries of load cycling. Comparison between results of calculation and experiment showed a good agreement. In order to fill the model, it is sufficient to have the results from monotonic tensile testing and characteristics of microstructure of the starting material.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>For notes</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22606" />
    <author>
      <name />
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22606</id>
    <updated>2017-12-07T16:02:52Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: For notes</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Показатели риска и диагностические модели при внезапных отказах</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22608" />
    <author>
      <name>Белодеденко, С. В.</name>
    </author>
    <author>
      <name>Гречаный, А. Н.</name>
    </author>
    <author>
      <name>Ибрагимов, М. С.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22608</id>
    <updated>2017-12-07T16:03:09Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Показатели риска и диагностические модели при внезапных отказах
Автори: Белодеденко, С. В.; Гречаный, А. Н.; Ибрагимов, М. С.
Короткий огляд (реферат): The method of the resource safety index is justified. It is used to assess reliability, with both gradual and sudden failures. A model of the periodicity of emissions for mechanical systems of industrial production is developed.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Видавнича сторінка</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22607" />
    <author>
      <name />
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22607</id>
    <updated>2017-12-07T16:03:05Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Видавнича сторінка</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Зміст</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22605" />
    <author>
      <name />
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22605</id>
    <updated>2017-12-07T16:02:31Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Зміст</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Дослідження напружено – деформівного стану стінки-перемички перфорованої балки з круглими отворами</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22604" />
    <author>
      <name>Підгурський, Микола Іванович</name>
    </author>
    <author>
      <name>Слободян, Василь Володимирович</name>
    </author>
    <author>
      <name>Рудяк, Юрій Аронович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22604</id>
    <updated>2017-12-07T16:02:13Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Дослідження напружено – деформівного стану стінки-перемички перфорованої балки з круглими отворами
Автори: Підгурський, Микола Іванович; Слободян, Василь Володимирович; Рудяк, Юрій Аронович
Короткий огляд (реферат): Cellular beams were modeled using Finite Element Method in the SolidWorks2013 software suite and imported into ANSYS Workbench 15.0. The onsidered distribution of stresses in the wall-jumper of a cellular beams is considered. Studies have shown that in the jumper wall there is a curvilinear distribution of normal stresses.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Кавітаційно-ерозійна стійкість удароміцних полімерних матеріалів в корозійно-активних середовищах</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22602" />
    <author>
      <name>Стечишин, М. С.</name>
    </author>
    <author>
      <name>Мартинюк, А. В.</name>
    </author>
    <author>
      <name>Білик, Ю. М.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22602</id>
    <updated>2017-12-07T16:03:07Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Кавітаційно-ерозійна стійкість удароміцних полімерних матеріалів в корозійно-активних середовищах
Автори: Стечишин, М. С.; Мартинюк, А. В.; Білик, Ю. М.
Короткий огляд (реферат): The wearproofness is considered shock proof plastics at their cavitations wear in neutral, lye and sour environments. Influence of temperature is studied on the gang kinetics wear, a method and installation which eliminates influence of temperature on density deterioration of surface of the got data is resulted is designed</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Дослідження залишкового ресурсу плоского ножа дообрізувача гички активного типу</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22603" />
    <author>
      <name>Цьонь, Олег Петрович</name>
    </author>
    <author>
      <name>Сташків, Микола Ярославович</name>
    </author>
    <author>
      <name>Олексюк, Василь Петрович</name>
    </author>
    <author>
      <name>Цьонь, Ганна Богданівна</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22603</id>
    <updated>2017-12-07T16:01:47Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Дослідження залишкового ресурсу плоского ножа дообрізувача гички активного типу
Автори: Цьонь, Олег Петрович; Сташків, Микола Ярославович; Олексюк, Василь Петрович; Цьонь, Ганна Богданівна
Короткий огляд (реферат): In the article analytically and experimentally investigated the stress-strain state of a flat knife of a sugar-beetle honeycomer trimmer. The residual lifetime of a flat knife is calculated when propagation in the transverse section of the fatigue crack of normal separation is distributed.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Проблеми інтелектуалізації в системах SHM: оцінювання, прогнозування, багатокласове розпізнавання</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22598" />
    <author>
      <name>Бурау, Надія Іванівна</name>
    </author>
    <author>
      <name>Цибульник, Сергій Олексійович</name>
    </author>
    <author>
      <name>Рупіч, Сергій Сергійович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22598</id>
    <updated>2017-12-07T16:02:10Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Проблеми інтелектуалізації в системах SHM: оцінювання, прогнозування, багатокласове розпізнавання
Автори: Бурау, Надія Іванівна; Цибульник, Сергій Олексійович; Рупіч, Сергій Сергійович
Короткий огляд (реферат): The work is devoted to the solution of the problems of intellectualization of multi-channel monitoring systems of complex spatial objects. The results of researches are given for the following problems: a) visualization of measurement data and prognostication; b) multi-class recognition by a neural network classifier, and c) development of evaluation algorithms on the basis
of the maximum likelihood method.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Неруйнівний контроль напружено-деформованого стану металевих гофрованих конструкцій залізничної колії</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22601" />
    <author>
      <name>Лучко, Йосип Йосипович</name>
    </author>
    <author>
      <name>Ковальчук, В. В.</name>
    </author>
    <author>
      <name>Ковальчук, Ю. Є.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22601</id>
    <updated>2017-12-07T16:02:57Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Неруйнівний контроль напружено-деформованого стану металевих гофрованих конструкцій залізничної колії
Автори: Лучко, Йосип Йосипович; Ковальчук, В. В.; Ковальчук, Ю. Є.
Короткий огляд (реферат): У даній роботі розроблені наукові основи нового пристрою для вимірювання та оцінки напружено-деформованого стану металевих гофрованих конструкцій залізничної колії при дії змінних температурах і навантаженнях від рухомого складу залізничного транспорту.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Прогнозування діаграм втомного руйнування алюмінієвого стопу Д16Т методами машинного навчання</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22599" />
    <author>
      <name>Дідич, Ірина Степанівна</name>
    </author>
    <author>
      <name>Пастух, Олег Анатолійович</name>
    </author>
    <author>
      <name>Ясній, Олег Петрович</name>
    </author>
    <author>
      <name>Пиндус, Юрій Іванович</name>
    </author>
    <author>
      <name>Луцик, Н. С.</name>
    </author>
    <author>
      <name>Зеленський, В. К.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22599</id>
    <updated>2018-08-29T15:41:52Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Прогнозування діаграм втомного руйнування алюмінієвого стопу Д16Т методами машинного навчання
Автори: Дідич, Ірина Степанівна; Пастух, Олег Анатолійович; Ясній, Олег Петрович; Пиндус, Юрій Іванович; Луцик, Н. С.; Зеленський, В. К.
Короткий огляд (реферат): The methods of machine learning (neural networks, boosted trees and random forests) were used to predict the fatigue crack growth diagrams in an aluminium D16T alloy under regular loading at stress ratio R = 0, 0.2, 0.4, 0.6. The obtained results are in good agreement with the experimental data. The neural network method gives the least prediction error.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Прогнозування розвитку пошкодженості деталей транспортних систем в задачах судової експертизи з використанням дискретних математичних моделей</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22600" />
    <author>
      <name>Кузін, М. О.</name>
    </author>
    <author>
      <name>Лучко, Йосип Йосипович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22600</id>
    <updated>2017-12-07T16:02:43Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Прогнозування розвитку пошкодженості деталей транспортних систем в задачах судової експертизи з використанням дискретних математичних моделей
Автори: Кузін, М. О.; Лучко, Йосип Йосипович
Короткий огляд (реферат): In work on the basis of the cellular automata approach, a technique is proposed for modeling the life cycle of assemblies of rolling stock parts, taking into account internal structural changes in the material. This technique allows you to restore the features of operational behavior of railway equipment under external influences.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Methodology and some results of study of frequency and waveform effect on the fatigue crack growth resistance of heat-resistant steel</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22596" />
    <author>
      <name>Yasniy, P.</name>
    </author>
    <author>
      <name>Rudawska, A.</name>
    </author>
    <author>
      <name>Iasnii, V.</name>
    </author>
    <author>
      <name>Zelenskiy, V.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22596</id>
    <updated>2017-12-07T16:01:31Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Methodology and some results of study of frequency and waveform effect on the fatigue crack growth resistance of heat-resistant steel
Автори: Yasniy, P.; Rudawska, A.; Iasnii, V.; Zelenskiy, V.
Короткий огляд (реферат): Investigation of frequency and waveform effect on the fatigue crack growth resistance of
heat-resistant 12Cr1MoV steel of a thermal power plant header after exploitation is presented. The 
studies showed that the crack growth is very non even. The increase of fatigue crack growth rate 
was 0.2-0.65 mm. The decrease of loading frequency at 500 C decreases significantly the FCG rate 
on the right part of FCG diagram.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Дослідження корозійно – втомної поведінки матеріалів несучих систем транспортних засобів</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22597" />
    <author>
      <name>Попович, Павло Васильович</name>
    </author>
    <author>
      <name>Дзюра, Володимир Олексійович</name>
    </author>
    <author>
      <name>Шевчук, Оксана Степанівна</name>
    </author>
    <author>
      <name>Гаврон, Надія Богданівна</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22597</id>
    <updated>2017-12-07T16:01:53Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Дослідження корозійно – втомної поведінки матеріалів несучих систем транспортних засобів
Автори: Попович, Павло Васильович; Дзюра, Володимир Олексійович; Шевчук, Оксана Степанівна; Гаврон, Надія Богданівна
Короткий огляд (реферат): In the article the features of corrosion of steel 20 in water saturated solutions of ammonium sulfate and nitrofosc are investigated. The influence of aggressive media (a solution of ammonium sulfate and nitrofosc) on the resistance to corrosion fatigue of steel 20 has been established at different levels of loading, which leads to corrosion and mechanical destruction of bearing units of
machines.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Сучасні методи діагностики стану будівельних конструкцій після їх тривалої експлуатації</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22595" />
    <author>
      <name>Ясній, Петро Володимирович</name>
    </author>
    <author>
      <name>Конончук, Олександр Петрович</name>
    </author>
    <author>
      <name>Якубишин, О. М.</name>
    </author>
    <author>
      <name>Зеленський, В. К.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22595</id>
    <updated>2017-12-07T16:03:03Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Сучасні методи діагностики стану будівельних конструкцій після їх тривалої експлуатації
Автори: Ясній, Петро Володимирович; Конончук, Олександр Петрович; Якубишин, О. М.; Зеленський, В. К.
Короткий огляд (реферат): The building survey of the beginning of the 20th century, using modern non-destructive testing devices was provided. The actual bearing capacity of the floor construction was calculated and the possibility of its further operation was established.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Вплив конструктивних особливостей на власні частоти коливань підсиленої циліндричної оболонки</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22594" />
    <author>
      <name>Ясній, Петро Володимирович</name>
    </author>
    <author>
      <name>Михайлишин, Михайло Стахович</name>
    </author>
    <author>
      <name>Гудь, Михайло Іванович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22594</id>
    <updated>2017-12-07T16:02:48Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Вплив конструктивних особливостей на власні частоти коливань підсиленої циліндричної оболонки
Автори: Ясній, Петро Володимирович; Михайлишин, Михайло Стахович; Гудь, Михайло Іванович</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Порівняльний аналіз кін та кінетики форми поверхневих півеліптичних тріщин в однорідному полі напружень та в зоні концентраторів</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22593" />
    <author>
      <name>Підгурський, Іван Миколайович</name>
    </author>
    <author>
      <name>Окіпний, Ігор Богданович</name>
    </author>
    <author>
      <name>Сташків, Микола Ярославович</name>
    </author>
    <author>
      <name>Кенс, І. В.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22593</id>
    <updated>2017-12-07T16:02:33Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Порівняльний аналіз кін та кінетики форми поверхневих півеліптичних тріщин в однорідному полі напружень та в зоні концентраторів
Автори: Підгурський, Іван Миколайович; Окіпний, Ігор Богданович; Сташків, Микола Ярославович; Кенс, І. В.
Короткий огляд (реферат): The modeling of semi-elliptical surface crack in the prismatic sample under tensile pressure was carried out based on the finite element method. A three-dimensional model of the sample with the global elements mesh, as well as the model of crack area with a local mesh with tetrahedral elements were developed. The values of SIF K1 along the contour of the semi-elliptical surface crack, well correlated with the known solutions, were obtained. The authors present the results of the study of stress intensity factors along the front of surface crack under uniaxial tension of finite size plate with stress concentrator and without it based on the finite element method. The development of shape of fatigue surface cracks are set.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Обґрунтування умов теплообміну при моделюванні температурного режиму ґрунту у районах розробки газових родовищ</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22590" />
    <author>
      <name>Побережний, Любомир Ярославович</name>
    </author>
    <author>
      <name>Кухтар, Д. В.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22590</id>
    <updated>2017-12-07T16:01:56Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Обґрунтування умов теплообміну при моделюванні температурного режиму ґрунту у районах розробки газових родовищ
Автори: Побережний, Любомир Ярославович; Кухтар, Д. В.
Короткий огляд (реферат): At the stage of transportation of gas containing condensate impurities, to places of complex preparation, there is a danger of formation of gas hydrates. High operating pressure in the pipeline and low temperature cause the formation of methane gas hydrates. The simulation of soil temperature in areas of gas deposits makes it possible to rationally use inhibitors of hydrate formation. The article substantiates the choice of a mathematical model for studying the temperature regime of soils. The results of the calculation of the temperature field of the upper layers of soil for the annual cycle are given.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Забезпечення надійної роботи тривалоексплуатованих довгомірних об’єктів</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22591" />
    <author>
      <name>Побережний, Любомир Ярославович</name>
    </author>
    <author>
      <name>Станецький, Андрій Ігорович</name>
    </author>
    <author>
      <name>Пиріг, Тарас Юрійович</name>
    </author>
    <author>
      <name>Кубаль, Р. В.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22591</id>
    <updated>2017-12-07T16:02:05Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Забезпечення надійної роботи тривалоексплуатованих довгомірних об’єктів
Автори: Побережний, Любомир Ярославович; Станецький, Андрій Ігорович; Пиріг, Тарас Юрійович; Кубаль, Р. В.
Короткий огляд (реферат): Long-term industrial facilities (oil, gas, steam and product pipelines) are complex technological complexes. Their use ensures uninterrupted transportation of liquids and gases. Improving the reliability and performance of such systems is an important issue. The corrosion-mechanical behavior of prolongedexplosive tubular steels in acidic soils was studied and a soil leveling was performed according to the level of corrosion hazard.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Збільшення тріщиностійкості будівельних матеріалів полімерними відходами</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22589" />
    <author>
      <name>Малишевська, О. С.</name>
    </author>
    <author>
      <name>Гаркавий, С. І.</name>
    </author>
    <author>
      <name>Мельник, О. Д.</name>
    </author>
    <author>
      <name>Мізюк, М. І.</name>
    </author>
    <author>
      <name>Мищенко, І. А.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22589</id>
    <updated>2017-12-07T16:01:34Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Збільшення тріщиностійкості будівельних матеріалів полімерними відходами
Автори: Малишевська, О. С.; Гаркавий, С. І.; Мельник, О. Д.; Мізюк, М. І.; Мищенко, І. А.
Короткий огляд (реферат): The best results were found for concrete mixtures containing 8 % of PET wastes with adding of SAS. Obtained mixtures were also characterized by the absence of cracks at visual observation, decreasing of shrinkage upto 34.6 %, increasing of cohesion of PET-wastes with the concrete stone up to 30.4% which was confirmed by microscopic and mechanical researches. The suggested method allows reducing weight concrete upto 21.3 % with out loss of its strength properties.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Вплив площі поперечного перерізу підкріплюючих елементів на власні частоти підсиленої циліндричної оболонки</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22592" />
    <author>
      <name>Ясній, Петро Володимирович</name>
    </author>
    <author>
      <name>Пиндус, Юрій Іванович</name>
    </author>
    <author>
      <name>Гудь, Михайло Іванович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22592</id>
    <updated>2017-12-07T16:02:20Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Вплив площі поперечного перерізу підкріплюючих елементів на власні частоти підсиленої циліндричної оболонки
Автори: Ясній, Петро Володимирович; Пиндус, Юрій Іванович; Гудь, Михайло Іванович</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Термомагнітоелектропружність анізотропних тіл із просторовими неплоскими тонкими включеннями</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22588" />
    <author>
      <name>Пастернак, Ярослав Михайлович</name>
    </author>
    <author>
      <name>Сулим, Георгій Теодорович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22588</id>
    <updated>2017-12-07T16:02:54Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Термомагнітоелектропружність анізотропних тіл із просторовими неплоскими тонкими включеннями
Автори: Пастернак, Ярослав Михайлович; Сулим, Георгій Теодорович
Короткий огляд (реферат): Based on the application of coupling principle for continua of different dimension mathematical models of thin deformable inclusions are proposed for thermomagnetoelectroelastic solids. Corresponding integral equations are derived and the boundary element method for their solution is developed. The key features of the latter are usage of discontinuous boundary elements, special shape functions, nonlinear mappings for smoothing the integrand at the element’s boundary, and modified Kutt’s quadrature for numerical evaluation of singular integrals. All these allow developing efficient numerical approach for solution of
formulated problem class. Numerical example is considered, which studies thin inhomogeneity of paraboloidal shape.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Аналіз розрахунку напруженого стану трубопроводів під час капітального ремонту</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22586" />
    <author>
      <name>Запухляк, В. Б.</name>
    </author>
    <author>
      <name>Марчук, О. М.</name>
    </author>
    <author>
      <name>Грицанчук, А. В.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22586</id>
    <updated>2017-12-07T16:02:35Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Аналіз розрахунку напруженого стану трубопроводів під час капітального ремонту
Автори: Запухляк, В. Б.; Марчук, О. М.; Грицанчук, А. В.
Короткий огляд (реферат): It is proposed to apply a three-step method when calculating the stressed state of the pipeline during pipeline impermeability. The analysis of existing methods of calculating the stress state is carried out. A comparison of the calculation results using the basic methods and the method of three
points was made and the corresponding conclusions were made.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Дослідження залежності напружено-деформованого стану елементів конструкцій ГТД від граничних умов термічного навантаження та ступеня деградації поверхневого шару</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22587" />
    <author>
      <name>Кравчук, Л. В.</name>
    </author>
    <author>
      <name>Задворний, Є. О.</name>
    </author>
    <author>
      <name>Буйських, Костянтин Павлович</name>
    </author>
    <author>
      <name>Феофентов, М. М.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22587</id>
    <updated>2017-12-07T16:02:46Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Дослідження залежності напружено-деформованого стану елементів конструкцій ГТД від граничних умов термічного навантаження та ступеня деградації поверхневого шару
Автори: Кравчук, Л. В.; Задворний, Є. О.; Буйських, Костянтин Павлович; Феофентов, М. М.
Короткий огляд (реферат): The influence of the boundary conditions of heat exchange and degradation of the surface layer of the material on the change in the thermal and stressed-strained state of the base material of the edge of the wedge-shaped specimens, including in the presence of cracks, in the process of
thermal fatigue loading has been analyzed</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Dynamic transient analysis of the reactor core barrel due to sudden rupture of the recirculation line piping</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22585" />
    <author>
      <name>Dubyk, Y. R.</name>
    </author>
    <author>
      <name>Orynyak, I. V.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22585</id>
    <updated>2017-12-07T16:02:24Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Dynamic transient analysis of the reactor core barrel due to sudden rupture of the recirculation line piping
Автори: Dubyk, Y. R.; Orynyak, I. V.
Короткий огляд (реферат): We have analyzed sudden rupture of the primary cooling loop which causes a water hammer event for the reactor core barrel. Assuming that core barrel is a thin shell, we have performed dynamic stress and strain calculations in the frequency domain. The Duhamel integral was used to calculate the transient response of a shell to an impulse load caused by the water hammer event. The results obtained were used to estimate structural stability of the core barrel</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Продление остаточного ресурса сварных соединений высокочастотной механической проковкой</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22584" />
    <author>
      <name>Дегтярев, В. А.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22584</id>
    <updated>2017-12-07T16:02:15Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Продление остаточного ресурса сварных соединений высокочастотной механической проковкой
Автори: Дегтярев, В. А.
Короткий огляд (реферат): The strengthening efficiency for butt-welded joints of steel St.3sp by high-frequency mechanical forging is shown. Moreover, the mechanisms of their residual lifetime variation as well as the fatigue crack growth rate in a wide range of high-frequency mechanical forging modes are studied after undergoing the process of specimen strengthening both in the initial state and after
preliminary accumulated fatigue damages.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Физико-механические свойства сплава АМг6 и стали 20ГЛ при комбинации электроискрового легирования и ультразвуковой ударной обработки</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22583" />
    <author>
      <name>Бялонович, Андрій Володимирович</name>
    </author>
    <author>
      <name>Матохнюк, Л. Е.</name>
    </author>
    <author>
      <name>Мордюк, Б. Н.</name>
    </author>
    <author>
      <name>Прокопенко, Г. И.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22583</id>
    <updated>2017-12-07T16:02:01Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Физико-механические свойства сплава АМг6 и стали 20ГЛ при комбинации электроискрового легирования и ультразвуковой ударной обработки
Автори: Бялонович, Андрій Володимирович; Матохнюк, Л. Е.; Мордюк, Б. Н.; Прокопенко, Г. И.
Короткий огляд (реферат): The influence of complex processing (electric spark alloying + ultrasonic impact treatment) on mechanical properties of AMG6 alloy and 20GL cast steel is studied. Using X-ray analysis, it has been established that such processing changes the phase composition and microstructure, forms residual compressive macro stresses and reduced surface roughness. Thus, the
mechanical properties of alloys, above all, the wear resistance and fatigue strength are increased.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Поліпшення пластичних властивостей високоміцних двофазних титанових сплавів за рахунок ударно-коливального навантаження</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22582" />
    <author>
      <name>Чаусов, Микола Георгійович</name>
    </author>
    <author>
      <name>Марущак, Павло Орестович</name>
    </author>
    <author>
      <name>Пилипенко, Андрій Петрович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22582</id>
    <updated>2017-12-07T16:01:51Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Поліпшення пластичних властивостей високоміцних двофазних титанових сплавів за рахунок ударно-коливального навантаження
Автори: Чаусов, Микола Георгійович; Марущак, Павло Орестович; Пилипенко, Андрій Петрович
Короткий огляд (реферат): It is established experimentally that dynamic non-equilibrium processes (DNP) with self-organizing structure occur under impact-oscillatory loading in high-strength two-phase titanium alloys VT22 and VT23. Under the repeated static tension of alloys, DNPs cause significant changes in the initial plasticity of the alloys. For investigated alloys, the optimal modes of impact-oscillatory loading are substantiated, which ensure a maximum increase in their plastic deformation after the implementation of DNP.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Фрактографічні особливості втомного руйнування сталі 20 в інгібованому середовищі</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22579" />
    <author>
      <name>Хабурський, Ярослав Мирославович</name>
    </author>
    <author>
      <name>Дацишин, Я. Н.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22579</id>
    <updated>2017-12-07T16:02:41Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Фрактографічні особливості втомного руйнування сталі 20 в інгібованому середовищі
Автори: Хабурський, Ярослав Мирославович; Дацишин, Я. Н.
Короткий огляд (реферат): It is shown that inhibitor TIS influences corrosion fatigue crack growth of carbon 20 steel. Inhibitor in water localizes the influence of hydrogenation, and, consequently, the boundaries of the grains reduce lesser than in water In this case, hydrogenation localized on the interphase boundaries inside the perlite grains, which stabilized the corrosion processes at the top of
the crack and contributed to the constant rate of the fatigue crack growth at low load amplitudes.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Поширення корозійних тріщин в двошарових пластинах за довготривалого навантаження</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22580" />
    <author>
      <name>Андрейків, Олександр Євгенович</name>
    </author>
    <author>
      <name>Долінська, Ірина Ярославівна</name>
    </author>
    <author>
      <name>Лисик, А. Р.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22580</id>
    <updated>2017-12-07T16:02:50Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Поширення корозійних тріщин в двошарових пластинах за довготривалого навантаження
Автори: Андрейків, Олександр Євгенович; Долінська, Ірина Ярославівна; Лисик, А. Р.
Короткий огляд (реферат): The computational models were developed to determine the residual life of two-layer plates with cracks under long-term cyclic loads and corrosive environments. These models are based on the first law of thermodynamics, that is, the energy balance of the components and rates of their changes in a two-layer metal body that contains the macro crack and exposed to long-term cyclic tension and corrosion aggressive environments. The particular cases are considered.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Дослідження впливу деградованого поверхневого шару та напружено-деформованого стану на залишковий ресурс елементів конструкцій ГТД</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22581" />
    <author>
      <name>Буйських, Костянтин Павлович</name>
    </author>
    <author>
      <name>Задворний, Є. О.</name>
    </author>
    <author>
      <name>Киселевська, С. Г.</name>
    </author>
    <author>
      <name>Кравчук, Л. В.</name>
    </author>
    <author>
      <name>Феофентов, М. М.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22581</id>
    <updated>2017-12-07T16:01:39Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Дослідження впливу деградованого поверхневого шару та напружено-деформованого стану на залишковий ресурс елементів конструкцій ГТД
Автори: Буйських, Костянтин Павлович; Задворний, Є. О.; Киселевська, С. Г.; Кравчук, Л. В.; Феофентов, М. М.
Короткий огляд (реферат): The paper shows the need to consider the properties degradation of the most loaded surface material layers due to cyclic action of high-temperature media, which is significant at the stages up to thermal fatigue crack initiation and propagation, resulting in the difficulty regarding the standard fracture mechanics criteria use in the process of selection of limiting state models and calculation of the TSSS kinetics in the methods for prediction of GTE elements residual lifetime.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Методологія експериментального дослідження впливу спектру навантаження на поведінку і втомне пошкодження під час транспортування ракети носія</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22578" />
    <author>
      <name>Ясній, Петро Володимирович</name>
    </author>
    <author>
      <name>Пиндус, Юрій Іванович</name>
    </author>
    <author>
      <name>Гудь, Михайло Іванович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22578</id>
    <updated>2017-12-07T16:02:29Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Методологія експериментального дослідження впливу спектру навантаження на поведінку і втомне пошкодження під час транспортування ракети носія
Автори: Ясній, Петро Володимирович; Пиндус, Юрій Іванович; Гудь, Михайло Іванович</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Оцінювання залишкового ресурсу осі колісної пари локомотива із поверхневою поперечною тріщиною</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22576" />
    <author>
      <name>Рудавський, Д. В.</name>
    </author>
    <author>
      <name>Канюк, Ю. І.</name>
    </author>
    <author>
      <name>Шефер, М. С.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22576</id>
    <updated>2017-12-07T16:02:17Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Оцінювання залишкового ресурсу осі колісної пари локомотива із поверхневою поперечною тріщиною
Автори: Рудавський, Д. В.; Канюк, Ю. І.; Шефер, М. С.
Короткий огляд (реферат): A new calculation methodology of residual lifetime estimation of railway wheel axle is proposed. The methodology is based on kinetic equation of fatigue crack growth, obtained by energy approach of fracture mechanics of materials. It is shown, that comparatively small crack-like
defects at the wheel axle surface reach critical sizes in comparatively short run.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Новий підхід до оцінки критичної температури крихкості металу корпусу реактора ВВЕР-1000</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22575" />
    <author>
      <name>Ревка, В. М.</name>
    </author>
    <author>
      <name>Гринченко, Г. П.</name>
    </author>
    <author>
      <name>Чирко, Л. І.</name>
    </author>
    <author>
      <name>Тригубенко, О. В.</name>
    </author>
    <author>
      <name>Голяк, М. Г.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22575</id>
    <updated>2017-12-07T16:02:03Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Новий підхід до оцінки критичної температури крихкості металу корпусу реактора ВВЕР-1000
Автори: Ревка, В. М.; Гринченко, Г. П.; Чирко, Л. І.; Тригубенко, О. В.; Голяк, М. Г.
Короткий огляд (реферат): This paper analyzes the shortcomings of existing regulatory approaches used in Ukraine in determining the rate of radiation embrittlementofRPV metal. It was shown that the application of these approaches can lead to the incorrect estimation of the critical temperature of brittleness.Based on the experience of surveillancespecimens testing and the analysis of experimental data it was offered a modern method for determining the critical brittleness temperature of the RPV metal.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Моделювання напружено – деформованого стану металоконструкцій транспортерів</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22577" />
    <author>
      <name>Кучвара, Іван Миколайович</name>
    </author>
    <author>
      <name>Бабій, Марія Василівна</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22577</id>
    <updated>2017-12-07T16:02:22Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Моделювання напружено – деформованого стану металоконструкцій транспортерів
Автори: Кучвара, Іван Миколайович; Бабій, Марія Василівна
Короткий огляд (реферат): In the article computer model of the tape winding process on the mandrel is presented. This model allows predicting of emergence of critical stresses that lead to the destruction of the material. According to the results of simulation, the minimum allowable radius of bending is determined. In this way, it is possible to avoid the appearance of negative phenomena that negatively affect of transporters performance.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Методика и результаты исследования влияния смешанных мод дефформирования на характеристики статической трещиностойкости теплоустойчивых сталей с учетом предварительного термомеханического нагружения</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22574" />
    <author>
      <name>Покровский, В. В.</name>
    </author>
    <author>
      <name>Сидяченко, В. Г.</name>
    </author>
    <author>
      <name>Ежов, В. Н.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22574</id>
    <updated>2017-12-07T16:01:59Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Методика и результаты исследования влияния смешанных мод дефформирования на характеристики статической трещиностойкости теплоустойчивых сталей с учетом предварительного термомеханического нагружения
Автори: Покровский, В. В.; Сидяченко, В. Г.; Ежов, В. Н.
Короткий огляд (реферат): It is set that the component of longitudinal shear diminishes the "positive effect of PTS", i.e. increase of fracture toughness as a result of preliminary thermo mechanical loading. It is shown that during determination of fracture toughness KIIIc at the loading of prismatic specimen of eventual thickness by a longitudinal shear, on front of crack displacement will be realized as in
transversal (mode II) so in longitudinal (mode III) directions.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Моделювання та діагностування напруженого стану підземних магістральних газопроводів в зонах шахтних виробіток</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22572" />
    <author>
      <name>Ориняк, Ігор Володимирович</name>
    </author>
    <author>
      <name>Богдан, А. В.</name>
    </author>
    <author>
      <name>Ясковець, З. С.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22572</id>
    <updated>2017-12-07T16:01:37Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Моделювання та діагностування напруженого стану підземних магістральних газопроводів в зонах шахтних виробіток
Автори: Ориняк, Ігор Володимирович; Богдан, А. В.; Ясковець, З. С.
Короткий огляд (реферат): The paper deals with the calculation of the stress-strained state of buried pipelines in the areas of coal mining. An effective numerical iterative procedure is developed for the modeling of the stress state which takes into account the elastic-plastic model of the interaction of the pipe
surface and the soil. In order to diagnose the stress-strained state of pipelines during the production of mining, a system of their continuous monitoring was created. The correctness of the numerical simulation of the stressed state of the gas pipeline as well as effectiveness of the activities which are developed to reduce the high stress level in dangerous zones is confirmed by the relevant 
monitoring data of the stressed state.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Методика оцінки ресурсу безпечної експлуатації трубопроводів</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22573" />
    <author>
      <name>Пиріг, Тарас Юрійович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22573</id>
    <updated>2017-12-07T16:01:45Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Методика оцінки ресурсу безпечної експлуатації трубопроводів
Автори: Пиріг, Тарас Юрійович
Короткий огляд (реферат): The method of estimating the influence of the laying method on the work life of the pipelines has been developed. Based on the combined analysis of indicators of durability and deformation behavior of the pipeline material, a method for determining the safe operation resource is proposed and the notion "relative safe exploitation resource" of the sea pipelines is introduced,
the use of which allows to offset the effect of the dispersion of the durability of samples and the associated calculation errors in within the limits of one level of stress.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Моделювання зародження та розвитку докритичного пошкодження матеріалу зварних трубопровідних елементів в умовах високотемпературної експлуатації</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22030" />
    <author>
      <name>Міленін, О. С.</name>
    </author>
    <author>
      <name>Великоіваненко, О. А.</name>
    </author>
    <author>
      <name>Розинка, Г. П.</name>
    </author>
    <author>
      <name>Півторак, Н. І.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22030</id>
    <updated>2017-11-15T10:07:55Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Моделювання зародження та розвитку докритичного пошкодження матеріалу зварних трубопровідних елементів в умовах високотемпературної експлуатації
Автори: Міленін, О. С.; Великоіваненко, О. А.; Розинка, Г. П.; Півторак, Н. І.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Особливості корозійно-механічного руйнування тривало експлуатованих трубопровідних сталей у модельному грунтовому розчині</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22029" />
    <author>
      <name>Греділь, Мирослава Іванівна</name>
    </author>
    <author>
      <name>Цирульник, Олександр Тимофійович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22029</id>
    <updated>2017-11-15T10:07:50Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Особливості корозійно-механічного руйнування тривало експлуатованих трубопровідних сталей у модельному грунтовому розчині
Автори: Греділь, Мирослава Іванівна; Цирульник, Олександр Тимофійович
Короткий огляд (реферат): Peculiarities of stress corrosion cracking and corrosion fatigue for gas pipeline steels of different strength in the model soil solution NS4 have been analyzed depending on their operation time. Aggressive action of the corrosive environment is more significant under a lower strain rate.
Regularities of steels in-service degradation reveal themselves in a similar way in two types of the tests, namely in the slow strain rate testing as well as under cyclic loading.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Дослідження кінетики пошкоджуваності сталі 10ГН2МФАВ умовах релаксації при ступінчатому статичному навантаженні</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22028" />
    <author>
      <name>Гігіняк, Фелікс Федорович</name>
    </author>
    <author>
      <name>Булах, П. О.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22028</id>
    <updated>2017-11-15T10:07:46Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Дослідження кінетики пошкоджуваності сталі 10ГН2МФАВ умовах релаксації при ступінчатому статичному навантаженні
Автори: Гігіняк, Фелікс Федорович; Булах, П. О.
Короткий огляд (реферат): The article presents the results of studying the influence of the relaxation process on the kinetics of the accumulation of damage to 10GN2MFA steel under conditions of stepwise static loading.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Визначення кінетики пошкоджуваності конструкційних сталей за нестаціонарного навантаження</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22022" />
    <author>
      <name>Булах, П. О.</name>
    </author>
    <author>
      <name>Бялонович, Андрій Володимирович</name>
    </author>
    <author>
      <name>Новіков, А. І.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22022</id>
    <updated>2017-11-15T10:07:52Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Визначення кінетики пошкоджуваності конструкційних сталей за нестаціонарного навантаження
Автори: Булах, П. О.; Бялонович, Андрій Володимирович; Новіков, А. І.
Короткий огляд (реферат): A technique for determining the fatigue resistance for a non-stationary load is developed.An analytical model and a technique have been developed that make it possible to assess the damageability of steels with respect to the high cycle fatiguewith an amplitude varying in accordance with a random law.The procedure for assessing material damage is based on the LM-hardness method.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Microfractography of static tensile tests fractures of 1.4539 austenitic steel and 1.4742 ferritic steel welded joints</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22011" />
    <author>
      <name>Nasiłowska, Barbara</name>
    </author>
    <author>
      <name>Bogdanowicz, Zdzisław</name>
    </author>
    <author>
      <name>Flądro, Janusz</name>
    </author>
    <author>
      <name>Noga, Mariusz</name>
    </author>
    <author>
      <name>Pastuszka, Paweł</name>
    </author>
    <author>
      <name>sierakowski, Bartosz</name>
    </author>
    <author>
      <name>Zegar, Kaziemierz</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22011</id>
    <updated>2017-11-15T10:04:38Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Microfractography of static tensile tests fractures of 1.4539 austenitic steel and 1.4742 ferritic steel welded joints
Автори: Nasiłowska, Barbara; Bogdanowicz, Zdzisław; Flądro, Janusz; Noga, Mariusz; Pastuszka, Paweł; sierakowski, Bartosz; Zegar, Kaziemierz
Короткий огляд (реферат): The paper presents the results of microfractography of static tensile test fractures of welded joints of 1.4539 austenitic steel and 1.4742 ferritic steel utilized for chemical installations production. The tested types of steel resistant to corrosion indicated two different types of fracturing. In case of ferritic steel, it was brittle fracturing on the boundaries of grains, whereas, in case of austenitic steel it was plastic fracturing.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Forevord</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/22000" />
    <author>
      <name />
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/22000</id>
    <updated>2017-11-15T10:03:52Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Forevord</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Передмова</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21989" />
    <author>
      <name />
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21989</id>
    <updated>2017-11-15T10:04:01Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Передмова</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Мехатронний комплекс діагностування магістральних трубопроводів</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21987" />
    <author>
      <name>Шевчук, С. П.</name>
    </author>
    <author>
      <name>Зайченко, Стефан Володимирович</name>
    </author>
    <author>
      <name>Вовк, О. О.</name>
    </author>
    <author>
      <name>Вапнічна, В. В.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21987</id>
    <updated>2017-11-15T10:03:10Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Мехатронний комплекс діагностування магістральних трубопроводів
Автори: Шевчук, С. П.; Зайченко, Стефан Володимирович; Вовк, О. О.; Вапнічна, В. В.
Короткий огляд (реферат): To diagnose pipeline stresses, it is proposed to use a mobile mechatronic complex.
An analysis of techniques for the positioning of mechatronic systems revealed that in order to determine position of the complex using the microelectronic systems, it is necessary to employ six components: three displacements Δx, Δy, Δz and three Euler angles Δφ, Δψ, Δθ. These parameters allowed us to establish a change in the position of the complex and pipeline.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Вплив структури різних зон поздовжніх зварних з’єднань труб на параметри сигналів магнетопружної акустичної емісії</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21986" />
    <author>
      <name>Почапський, Євген Петрович</name>
    </author>
    <author>
      <name>Клим, Б. П.</name>
    </author>
    <author>
      <name>Рудак, М. О.</name>
    </author>
    <author>
      <name>Великий, П. П.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21986</id>
    <updated>2017-11-15T10:02:49Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Вплив структури різних зон поздовжніх зварних з’єднань труб на параметри сигналів магнетопружної акустичної емісії
Автори: Почапський, Євген Петрович; Клим, Б. П.; Рудак, М. О.; Великий, П. П.
Короткий огляд (реферат): The microstructure of the steel 19H of oil pipes after long-term exploitation is investigated.
Conformity to law of change of parameters of signals of magnetoelastic acoustic emission from the structure of the different zones of the weld joint is set. Influence of remaining stress after welding 
on the change of sum of the amplitudes of the signals of magnetoelastic acoustic emission is investigated.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Дослідження впливу геодинамічних процесів на порушення нормальної експлуатації трубопровідних систем</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21984" />
    <author>
      <name>Побережний, Любомир Ярославович</name>
    </author>
    <author>
      <name>Цих, В. С.</name>
    </author>
    <author>
      <name>Яворський, А. В.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21984</id>
    <updated>2017-11-15T10:03:57Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Дослідження впливу геодинамічних процесів на порушення нормальної експлуатації трубопровідних систем
Автори: Побережний, Любомир Ярославович; Цих, В. С.; Яворський, А. В.
Короткий огляд (реферат): Investigation of geodynamic processes influence for normal operation of buried pipeline systems is realized. Possibility for obtaining the information about the geodynamic zone that is crossed by an extended engineering structure is analyzed. Possibilities for studying the geodynamic block boundaries effect on the operating of buried engineering structures are sized.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Вплив полів розмагнечення на механізми генерування магнетопружної акустичної емісії у феромагнетних матеріалах</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21985" />
    <author>
      <name>Почапський, Євген Петрович</name>
    </author>
    <author>
      <name>Мельник, Н. П.</name>
    </author>
    <author>
      <name>Коблан, І. М.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21985</id>
    <updated>2017-11-15T10:04:12Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Вплив полів розмагнечення на механізми генерування магнетопружної акустичної емісії у феромагнетних матеріалах
Автори: Почапський, Євген Петрович; Мельник, Н. П.; Коблан, І. М.
Короткий огляд (реферат): Magnetoelastic acoustic emission (MAE) has been measured from a Ni bar and a steel bar of various thickness. The magnetiziting field was produced by a c-core electromagnet, which was separated from the specimen surface by a nonmagnetic spacer layer various thickness. The generation of MAE is due to domain wall creation, motion and annihilation during the process of magnetization. Influence of the demagnetizing fields allows to separate these three processes.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Фрактодіагностика технічного стану сталей різної міцності для газогонів</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21983" />
    <author>
      <name>Кречковська, Галина Василівна</name>
    </author>
    <author>
      <name>Студент, Олександра Зиновіївна</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21983</id>
    <updated>2017-11-15T10:03:42Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Фрактодіагностика технічного стану сталей різної міцності для газогонів
Автори: Кречковська, Галина Василівна; Студент, Олександра Зиновіївна
Короткий огляд (реферат): The results of the fractography investigation of the gas pipeline steels of the various strength
levels in the initial state and after operation are presented. The influence of operation degradation 
and strength level of steels on their fracture mechanisms after tension testing on air were analyzed. 
A number of fractographic features caused by service degradation of steels with various strength levels was shown. Macrotexture in the central part of the fracture surfaces and deep macro- and 
microstratifications in the direction of rolling steels associated with the steel damages during operation were revealed.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Визначення механічних характеристик сталі 15Х2НМФА за результатами інструментованого індентування</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21982" />
    <author>
      <name>Каток, Олег Анатолійович</name>
    </author>
    <author>
      <name>Кондряков, Євген Олександрович</name>
    </author>
    <author>
      <name>Кравчук, Р. В.</name>
    </author>
    <author>
      <name>Харченко, Валерій Володимирович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21982</id>
    <updated>2017-11-15T10:03:12Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Визначення механічних характеристик сталі 15Х2НМФА за результатами інструментованого індентування
Автори: Каток, Олег Анатолійович; Кондряков, Євген Олександрович; Кравчук, Р. В.; Харченко, Валерій Володимирович
Короткий огляд (реферат): The mechanical characteristics of steel 15Kh2NMFA according to the diagram of uniaxial tension, obtained by the instrumented indentation method, were determined. It was shown that the deviation between the values of the strength characteristics, determined during indentation and tensile test, does not
exceed 1%.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Оцінка пошкоджень металу конструкцій при статичному та циклічному деформуванні по кінетиці коерцитивної сили</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21980" />
    <author>
      <name>Гопкало, О.</name>
    </author>
    <author>
      <name>Безлюдько, Г.</name>
    </author>
    <author>
      <name>Нехотящий, В.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21980</id>
    <updated>2017-11-15T10:04:10Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Оцінка пошкоджень металу конструкцій при статичному та циклічному деформуванні по кінетиці коерцитивної сили
Автори: Гопкало, О.; Безлюдько, Г.; Нехотящий, В.
Короткий огляд (реферат): The results of experimental investigations of the damage assessment of
ferromagnetic steel 05kp and austenite (paramagnetic in the initial state) steel AISI 304 (08Kh18N9) using the coercive force kinetics under static and cyclic loading are presented. In accordance with the change of direction of the coercive force kinetics the staging of damage accumulation processes is determined, namely: elastoplastic deformation corresponds to the crack initiation stage, while metal continuity loss corresponds to the crack propagation stage.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Побудова моделей для діагностування технічного стану силових агрегатів</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21979" />
    <author>
      <name>Білодіденко, Сергій Валентинович</name>
    </author>
    <author>
      <name>Біліченко, Г. М.</name>
    </author>
    <author>
      <name>Яцуба, А. В.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21979</id>
    <updated>2017-11-15T10:03:50Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Побудова моделей для діагностування технічного стану силових агрегатів
Автори: Білодіденко, Сергій Валентинович; Біліченко, Г. М.; Яцуба, А. В.
Короткий огляд (реферат): For efficient maintenance of power mechanical units it is necessary to solve the problem of combining the individual parameters of the reliability of the elements to obtain the reliability of the technical system. An example of a study of working capacity plunger pumps demonstrated a diagnostic algorithm, which was constructed on the basis of the safety index method. Key words: technical condition, plunger pump, lifetime.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Діагностування деградації механічних властивостей сталей газопроводів за зміною електрохімічних характеристик</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21981" />
    <author>
      <name>Звірко, О.</name>
    </author>
    <author>
      <name>Цирульник, Олександр Тимофійович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21981</id>
    <updated>2017-11-15T10:02:56Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Діагностування деградації механічних властивостей сталей газопроводів за зміною електрохімічних характеристик
Автори: Звірко, О.; Цирульник, Олександр Тимофійович
Короткий огляд (реферат): The results of research aimed to choosing diagnostic criteria for evaluation of
current technical condition of pipeline steels, taking into account in-service degradation, has been
presented in the paper. Mechanical properties degradation of pipeline steels caused by operation can 
be estimated by measurements of changes in their electrochemical characteristics. Having initial 
properties of the material, its actual properties can be predicted.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Основні закономірності зародження і росту втомних тріщин в алюмінієвих пластинах із зміцненими отворами</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21977" />
    <author>
      <name>Ясній, Петро Володимирович</name>
    </author>
    <author>
      <name>Гладьо, Сергій Володимирович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21977</id>
    <updated>2017-11-15T10:03:14Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Основні закономірності зародження і росту втомних тріщин в алюмінієвих пластинах із зміцненими отворами
Автори: Ясній, Петро Володимирович; Гладьо, Сергій Володимирович
Короткий огляд (реферат): The method of modeling stress-strain state for holes burnishing using FEM has been
analyzed. A series of fatigue tests were carried out using plates containing plain holes and cold 
expanded holes in aluminium For various diameters of holes and cold expansion degree there exists 
a certain correlation between the stress range or maximum stress on the edge of hole on the entrance 
face of plate and lifetime of fatigue crack initiation.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Редакційні сторінки</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21978" />
    <author>
      <name />
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21978</id>
    <updated>2017-11-15T10:03:36Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Редакційні сторінки</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Корозія прибудинкових газових мереж під дією змінного струму</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21974" />
    <author>
      <name>Яворський, А. В.</name>
    </author>
    <author>
      <name>Цих, В. С.</name>
    </author>
    <author>
      <name>Побережний, Любомир Ярославович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21974</id>
    <updated>2017-11-15T10:03:54Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Корозія прибудинкових газових мереж під дією змінного струму
Автори: Яворський, А. В.; Цих, В. С.; Побережний, Любомир Ярославович
Короткий огляд (реферат): The exploitation of underground gas networks of low pressure does not take into account the effect of electro corrosion Main causes of electro corrosion of low pressure pipelines were determined and the dependence of the induced current on the speed of corrosion of pipelines was obtained, which would enable to identify areas with an increased danger of electro corrosion and to take preventive measures in time.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Поведінка матеріалу трубопроводу у грунтах із хлоридним типом засолення</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21973" />
    <author>
      <name>Станецький, Андрій Ігорович</name>
    </author>
    <author>
      <name>Побережний, Любомир Ярославович</name>
    </author>
    <author>
      <name>Побережна, Любов Ярославівна</name>
    </author>
    <author>
      <name>Запухляк, В. Б.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21973</id>
    <updated>2017-11-15T10:03:31Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Поведінка матеріалу трубопроводу у грунтах із хлоридним типом засолення
Автори: Станецький, Андрій Ігорович; Побережний, Любомир Ярославович; Побережна, Любов Ярославівна; Запухляк, В. Б.
Короткий огляд (реферат): The influence of prolonged operation on the deformation behavior of the pipeline material in chloride model environmentswas studied, and it has been shown that, depending on the level of nominal stresses, the increase in creep deformation, can amount up to 30%.It is also important to consider the possibility of the development of landslides and soil deposition, not only in geodynamic zones, but also in sections of pipelines that pass through saline soils during flood periods.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Моделювання МСЕ механічної поведінки сплавів з пам'яттю форми</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21976" />
    <author>
      <name>Ясній, Володимир Петрович</name>
    </author>
    <author>
      <name>Дивдик, О. В.</name>
    </author>
    <author>
      <name>Лисенко, Я. Р.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21976</id>
    <updated>2017-11-15T10:02:58Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Моделювання МСЕ механічної поведінки сплавів з пам'яттю форми
Автори: Ясній, Володимир Петрович; Дивдик, О. В.; Лисенко, Я. Р.
Короткий огляд (реферат): In this study, there were presented the results of modeling of the mechanical behavior of shape memory alloys (SMA) under uniaxial tension by FEM. Superelastic behavior of cylindrical specimen of SMA with 4 mm in diameter was modeled using the software package Ansys Workbench. Distributions of normal stresses in the specimen, intensity of normal stress, displacements and deformations were built.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Вплив недосконалості адгезійного зв’язку на пластичне відшаровування примежового включення</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21975" />
    <author>
      <name>Кривень, Василь Андрійович</name>
    </author>
    <author>
      <name>Бойко, Андрій Романович</name>
    </author>
    <author>
      <name>Валяшек, Володимир Богданович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21975</id>
    <updated>2017-11-15T10:02:47Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Вплив недосконалості адгезійного зв’язку на пластичне відшаровування примежового включення
Автори: Кривень, Василь Андрійович; Бойко, Андрій Романович; Валяшек, Володимир Богданович
Короткий огляд (реферат): Numerical - analytical solution of anti-plane problem about stress - strain state in the
elastic-plastic half-space with a thin rigid tunnel inclusion parallel to the half-space limit is 
obtained. It is assumed that the inclusion was in connection with unilateral mechanical environment 
before loading. The features of plastic exfoliation of the inclusion are studied. The partial cases are 
considered.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Модель внутрішньотрубної корозії трубопроводів під дією газогідратів</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21971" />
    <author>
      <name>Побережний, Любомир Ярославович</name>
    </author>
    <author>
      <name>Грицанчук, А. В.</name>
    </author>
    <author>
      <name>Мазур, Мирослав Павлович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21971</id>
    <updated>2017-11-15T10:03:03Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Модель внутрішньотрубної корозії трубопроводів під дією газогідратів
Автори: Побережний, Любомир Ярославович; Грицанчук, А. В.; Мазур, Мирослав Павлович
Короткий огляд (реферат): Corrosion is the main cause of pipeline malfunction, which leads to severe degradation of the
environment, therefore, it is necessary to predict the integral duration of the pipeline service. In this 
paper, the prediction model of the corrosion rate of a gas pipeline under the influence of gas 
hydrates is considered. The model based on the thermodynamic properties of the liquid and gas 
entering the formed gas hydrate under the influence of different operating conditions.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Прояв різних типів руйнування під квазістатичним стиском стоматологічних ортопедичних конструкцій</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21972" />
    <author>
      <name>Скальський, Валентин Романович</name>
    </author>
    <author>
      <name>Макєєв, В. Ф.</name>
    </author>
    <author>
      <name>Станкевич, О. М.</name>
    </author>
    <author>
      <name>Кирманов, О. С.</name>
    </author>
    <author>
      <name>Павличко, Р. Р.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21972</id>
    <updated>2017-11-15T10:03:17Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Прояв різних типів руйнування під квазістатичним стиском стоматологічних ортопедичних конструкцій
Автори: Скальський, Валентин Романович; Макєєв, В. Ф.; Станкевич, О. М.; Кирманов, О. С.; Павличко, Р. Р.
Короткий огляд (реферат): Acoustic emission (AE) signals obtained from quasi-static compression tests on different dental materials and tooth-endocrown constructions were processed by continuous wavelet transform technique. By energy criterion three types of fracture were identified: plastic deformation, micro- and macrocracking (brittle fracture). Parameters including the frequency peak, bandwidth, pulsewidth and energy of AE signals were analyzed.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Damaging of a structural steel under monotonic and cyclic deformation</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21970" />
    <author>
      <name>Pisarenko, G. G.</name>
    </author>
    <author>
      <name>Voynalovich, O. V.</name>
    </author>
    <author>
      <name>Mailo, A. M.</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21970</id>
    <updated>2017-11-15T10:02:54Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Damaging of a structural steel under monotonic and cyclic deformation
Автори: Pisarenko, G. G.; Voynalovich, O. V.; Mailo, A. M.
Короткий огляд (реферат): The paper presents the characteristics of inelastic properties of the surface material
of laboratory specimens under monotonic deformation and fully reversed cyclic loading. The 
comparative results are shown for calculating the values of the surface layer inelastic strains 
determined based on the fractal parameterization method for statistically non-uniform surfaces of 
the material for two states of the deformation-induced relief under identical conditions of elasto-plastic deformation in specimens. The kinetic characteristics of discrete strains in the material at the 
stage of non-localized damaging are presented.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Взаємозв’язок і кінетика втомного пошкодження за умов м’якого і жорсткого режимів навантаження</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21969" />
    <author>
      <name>Новіков, А. І.</name>
    </author>
    <author>
      <name>Цибаньов, Георгій Васильович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21969</id>
    <updated>2017-11-15T10:02:42Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Взаємозв’язок і кінетика втомного пошкодження за умов м’якого і жорсткого режимів навантаження
Автори: Новіков, А. І.; Цибаньов, Георгій Васильович
Короткий огляд (реферат): The previously developed model of the ultimate exhaustion of cyclic plasticity is applied to
the summation of fatigue damages in predicting the longevity of cyclic loading regimes under
irregular loading, namely the rigid loading regime. The developed method is used to determine the
durability and kinetics of SSS for steels 45 and 1X2M under conditions of severe loading regimes
in the amplitude of totaland in elastic deformation.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Зв'язок між експлуатаційною пошкодженістю конструкційних сталей та їх фізико-механічними властивостями</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21968" />
    <author>
      <name>Никифорчин, Григорій Миколайович</name>
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21968</id>
    <updated>2017-11-15T10:03:47Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Зв'язок між експлуатаційною пошкодженістю конструкційних сталей та їх фізико-механічними властивостями
Автори: Никифорчин, Григорій Миколайович
Короткий огляд (реферат): Long-term operation of structural steels causes an essential decrease of the mechanical properties, especially characteristics of brittle fracture resistance. It is often accompanied by an intensive development of in-bulk material damaging. Special effects of different types of damaging on the mechanical properties are considered in the paper. They can result from
the first view even an improving of the certain properties in spite of the general deterioration of the metal state after service. Therefore the special attention should be given for the test procedure for prevention of uncorrected analysis in an evaluation of operated metal state.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Титульні сторінки</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21967" />
    <author>
      <name />
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21967</id>
    <updated>2017-11-15T10:03:34Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Титульні сторінки</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
  <entry>
    <title>Праці Ⅴ Міжнародної науково-технічної конференції „Пошкодження матеріалів під час експлуатації, методи його діагностування і прогнозування“</title>
    <link rel="alternate" href="http://elartu.tntu.edu.ua/handle/lib/21955" />
    <author>
      <name />
    </author>
    <id>http://elartu.tntu.edu.ua/handle/lib/21955</id>
    <updated>2017-11-17T10:01:23Z</updated>
    <published>2017-09-19T00:00:00Z</published>
    <summary type="text">Назва: Праці Ⅴ Міжнародної науково-технічної конференції „Пошкодження матеріалів під час експлуатації, методи його діагностування і прогнозування“
Короткий огляд (реферат): У збірнику висвітлені доповіді V Міжнародної науково-технічної конференції "Пошкодження&#xD;
матеріалів під час експлуатації, методи його діагностування і прогнозування" (Тернопіль, 19-22&#xD;
вересня 2017 р.). Розглянуто наступні питання: розсіяне і локалізоване пошкодження&#xD;
матеріалів;діагностування пошкоджень; методи описування і прогнозування пошкоджуваності&#xD;
матеріалів; оцінювання залишкового ресурсу елементів конструкцій.; The book comprises the papers presented at the International Conference “In-Service&#xD;
Damage of Materials, its Diagnostics and Prediction” (Ternopil, September 19-22, 2017). Which&#xD;
consider the following problems: localized and nonlocalized damage of materials; damage&#xD;
diagnostics; methods for describing and predicting material damaging; residual life assessment for&#xD;
structural elements.
Опис: Всі права захищені. Жодна з доповідей цього видання не може бути повністю чи частково відтворена&#xD;
або розмножена електронним, механічним, фото- чи будь-яким іншим способом без попереднього письмового&#xD;
погодження з програмним комітетом конференції. Всі доповіді відтворено з дозволу їх авторів.&#xD;
Видавець не несе відповідальності за будь-який збиток, заподіяний особам чи власності внаслідок&#xD;
некоректності наданої в збірнику інформації або при використанні будь-яких методів, виробів чи ідей, які&#xD;
описано в поданих авторами доповідях.; All rights reserved. No part of this publication may be reproduced, stored in retrieval system, or transmitted in&#xD;
any means, electronic, mechanical, photo-copying or otherwise, without the prior written permission of the Conference&#xD;
Program Committee. The papers are reproduced by permission of individual authors.&#xD;
No responsibility is assumed by the publisher for any injury and/or damage to persons or property as a matter&#xD;
of products liability, negligence or otherwise, or from any use or operation of any methods, products, instructions or&#xD;
ideas contained in the material herein.</summary>
    <dc:date>2017-09-19T00:00:00Z</dc:date>
  </entry>
</feed>

