霂瑞霂��撘����迨��辣: http://elartu.tntu.edu.ua/handle/lib/25968

Title: Trwałość zmęczeniowa elementów rurociągów przemysłowych z propagującym pęknięciem półeliptycznym
Other Titles: Fatigue resistance, elements industrial pipeline with propagation semi-elliptical fatigue crack
Authors: Śnieżek, L.
Śnieżek, L.
Affiliation: Military University of Technology, Warsaw, Poland
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego, Warszawa, Polska
Bibliographic description (Ukraine): Śnieżek L. Trwałość zmęczeniowa elementów rurociągów przemysłowych z propagującym pęknięciem półeliptycznym / L. Śnieżek // Вісник ТДТУ. — Т. : ТДТУ, 2008. — Том 13. — № 2. — С. 13–20. — (Механіка та матеріалознавство).
Bibliographic description (International): Śnieżek L. (2008) Fatigue resistance, elements industrial pipeline with propagation semi-elliptical fatigue crack. Bulletin of TSTU (Tern.), vol. 13, no 2, pp. 13-20 [in Polish].
Is part of: Вісник Тернопільського державного технічного університету, 2 (13), 2008
Bulletin of Ternopil State Technical University, 2 (13), 2008
Journal/Collection: Вісник Тернопільського державного технічного університету
Issue: 2
Volume: 13
Issue Date: 1-七月-2008
Submitted date: 12-五月-2008
Date of entry: 14-九月-2018
Publisher: ТДТУ
TSTU
Place of the edition/event: Тернопіль
Ternopil
UDC: 539.3
Number of pages: 8
Page range: 13-20
Start page: 13
End page: 20
Abstract: Industrial pipelines, most of all the ground-based ones intended to deliver chemicals, require more attention for their being potentially hazardous to both the population and the environment. The paper has been intended to present findings on the industrial pipeline’s fatigue life. The issue has been approached locally, i.e. from the standpoint of fatigue crack propagation. Two pipelines of different diameters of double-pressure acid systems were subjected to the assessment. Locally approached endurance tests were carried out under fatigue-crack-propagation conditions using specimens taken from a pipeline. Experiments were carried out using two test series: one from the material after some operational-use period, and one made of new material. Cracking initiators were made in the form of half elliptical cracks. Crack lengths were measured with the electric potential difference (EPD) method and optical wave-guides employed. Results of fatigue tests were then used to describe fatigue-cracking growth. On the grounds of results of fatigue tests, fatigue strength was determined and expressed with a number of cycles to failure.
Przemysłowe rurociągi, przeznaczone dla naziemnego transportowania substancji chemicznych wymagają szczególnej uwagi ze względu ryzyka jaki oni mogę stwarzać jak dla ludności, tak i środowiska. W artykule zaprezentowane otrzymane dane o zmęczeniowym zniszczeniu przemysłowego rurociągu w trakcie eksploatacji. Zniszczenie było badane w określonym miejscu, czyli od punktu inicjacji zmęczeniowego pęknięcia. Były poddane analizie dwa rurociągi o różnych średnicach dla transportowania systemów dwóchwartościowego kwasu. Wytrzymałościowe próby, realizowane na wycinkach rur z rurociągu z pomiarami propagacji zmęczeniowego pęknięcia od punktu inicjacji. Badania doświadczalne realizowane w dwóch seriach: jedna na materiałowi po niektórym okresie eksploatacji, i druga, na próbkach zrobionych z nowego materiału. Inicjatory były wykonane w formie półeliptycznych pęknięć. Długość pięknieć była mierzona przy użyciu elektrycznej metodę potencjalnej różnicy (EPD) z wykorzystaniem optycznych czujników fali. Wyniki badań doświadczalnych wykorzystane dla opisu propagacji zmęczeniowego pięknienia. Na podstawie tych wyników było określone zmęczeniowe naprężenia oraz liczba cykli do zniszczenia.
URI: http://elartu.tntu.edu.ua/handle/lib/25968
ISSN: 1727-7108
Copyright owner: © Тернопільський державний технічний університет імені Івана Пулюя, 2008;
References (Ukraine): 1. G. B. DeWolf: Process safety management in the pipeline industry: paralles and differences between the pipeline integrity management (IMP) rule of the Office of Pipeline Safety and the PSM/RMP approach for process facilities. Journal of Hazardous Materials 104. 2003.
2. G. A. Papadakis: Major hazard pipelines: a comparative study of onshore transmission accidents. Journal of Loss Prevention in the Process Industries 12, 91-107, 1999.
3. H. F. Chen, F.W. Shu: Simplified limit analysis of pipelines with multi-defects. Engineering Structures 23, 207-213, 2001.
4. L. Śnieżek, Cz. Goss, Mazur A., Experimental and Theoretical Investigations of Fatigue Life of Chemical Pipelines, Archives of Civil Enginering, No. 1, 2007.
5. S. H. Ahn, K. Ando, A. Hidaka: Fatigue crack growth and penetration behaviour in a pipe subjected to bending load. Engineering Against Fatigue, 73-82, A. A. Balkema/Rotterdam/Brookfield, 1999.
6. L. Śnieżek, Cz. Goss, Investigation Into Fatigue Life of Welded Chemical Pipelines, ECF 16 - 16th European Conference of Fracture, Alexandroupolis, Greece, July 3-7, 2006 Abstract: pp. 173-174 (CD-6 pages).
7. J. Samuelsson: Design and analysis of welded high strength steel structures. Nordic Industrial Fund. EMAS. Stockholm, Sweden, 2002.
8. K. Y. Lam, Q. X. Wang, Z. Zong: A nonlinear fluid-structure interaction analysis of a near-bed submarine pipeline in a current. Journal of Fluids and Structures 16(8), 1177-1191, 2002.
9. D. Matko, G. Geiger, W. Gregoritza: Verification of various pipeline models. Mathematics and Computers in Simulation 53, 303-308, 2000.
10. M. Bergman: Stress intensity factors for circumferential surface cracks in pipes. Fatigue Fract. Engng Mater. Struct. 18. 1155-1172, 1995.
11. M. Łubiński, W. Wojnowski, Cz. Goss: Load capacity of steel strucures taking into acount low cycle fatigue. Archiwum Inżynierii Lądowej 2, 183-204, 2002.
References (International): 1. G. B. DeWolf: Process safety management in the pipeline industry: paralles and differences between the pipeline integrity management (IMP) rule of the Office of Pipeline Safety and the PSM/RMP approach for process facilities. Journal of Hazardous Materials 104. 2003.
2. G. A. Papadakis: Major hazard pipelines: a comparative study of onshore transmission accidents. Journal of Loss Prevention in the Process Industries 12, 91-107, 1999.
3. H. F. Chen, F.W. Shu: Simplified limit analysis of pipelines with multi-defects. Engineering Structures 23, 207-213, 2001.
4. L. Śnieżek, Cz. Goss, Mazur A., Experimental and Theoretical Investigations of Fatigue Life of Chemical Pipelines, Archives of Civil Enginering, No. 1, 2007.
5. S. H. Ahn, K. Ando, A. Hidaka: Fatigue crack growth and penetration behaviour in a pipe subjected to bending load. Engineering Against Fatigue, 73-82, A. A. Balkema/Rotterdam/Brookfield, 1999.
6. L. Śnieżek, Cz. Goss, Investigation Into Fatigue Life of Welded Chemical Pipelines, ECF 16 - 16th European Conference of Fracture, Alexandroupolis, Greece, July 3-7, 2006 Abstract: pp. 173-174 (CD-6 pages).
7. J. Samuelsson: Design and analysis of welded high strength steel structures. Nordic Industrial Fund. EMAS. Stockholm, Sweden, 2002.
8. K. Y. Lam, Q. X. Wang, Z. Zong: A nonlinear fluid-structure interaction analysis of a near-bed submarine pipeline in a current. Journal of Fluids and Structures 16(8), 1177-1191, 2002.
9. D. Matko, G. Geiger, W. Gregoritza: Verification of various pipeline models. Mathematics and Computers in Simulation 53, 303-308, 2000.
10. M. Bergman: Stress intensity factors for circumferential surface cracks in pipes. Fatigue Fract. Engng Mater. Struct. 18. 1155-1172, 1995.
11. M. Łubiński, W. Wojnowski, Cz. Goss: Load capacity of steel strucures taking into acount low cycle fatigue. Archiwum Inżynierii Lądowej 2, 183-204, 2002.
Content type: Article
�蝷箔����:Вісник ТДТУ, 2008, том 13, № 2



�DSpace銝剜�������★��������雿��.