Моля, използвайте този идентификатор за цитиране или линк към този публикация: http://elartu.tntu.edu.ua/handle/lib/25935
Заглавие: Mathematical model of bending vibrations of a horizontal feeder-mixer along the flow of grain mixture
Други Заглавия: Математична модель згинних коливань горизонтального завантажувача-змішувача вздовж потоку зернової суміші
Автори: Lyashuk, Oleh Leontiiovych
Sokil, Maria Bohdanivna
Klendiy, Volodymyr Mykolaiovych
Skyba, Olena Pavlivna
Tretiakov, Oleksandr Lvovych
Slobodian, Liubommyr Mykhailovych
Slobodian, natalia Oleksandrivna
Bibliographic description (Ukraine): Lyashuk O.L., Sokil M.B., Klendiy V.M., Skyba O.P., Tretiakov O.L., Slobodian L.M., Slobodian N.O. Mathematical model of bending vibrations of a horizontal feeder-mixer along the flow of grain mixture // INMATEH: Agricultural engineering, vol.55, no.2, 2018, pp.35-44
Дата на Публикуване: 2018
Date of entry: 2-Сеп-2018
Place of the edition/event: Bucharest, Romania
Ключови Думи: mathematical model
feeder-mixer
horizontal screw
bending vibrations
Page range: 35-44
Резюме: During the grain mixture motion along the working body of the feeder, the transverse (bending) vibrations occur. To deduce a differential equation describing bending vibrations of the feeder-mixer horizontal screw, a physical model is developed; the distribution of forces acting on the element of the horizontal working body during the grain mixture movement is defined.
URI: http://elartu.tntu.edu.ua/handle/lib/25935
Copyright owner: © INMATEH: Agricultural engineering, 2018
References (Ukraine): [1] Bulgakov V., Adamchuk V., Nozdrovicky L., Kroсko V., Korenko M., Kiurchev V., Ihnatiev Y., (2017), Mathematical model of complex movement of a material point on a surface of agricultural machine working body, V International scientific Congress "Agricultural machinery", Vol.1, pp. 64-71;
[2] Chen L.Q., (2009), Nonlinear parametric vibration of axially moving beams: asymptotic analysis and differential quadrature verification, Journal of Physics: Conference, Series 181, pp.1–8;
[3] Hevko B.М., Pavelchuk Yu.F., (2017), Modeling of fluctuations of the mechanical system ‘suspension hole’: theoretical analysis, Innovative solutions in modern science, № 1(10), pp.1-9;
[4] Hevko B.М., Rohatynskyi R.М., (1989), Screw feeders of agricultural machines, Vyshcha shkola, p.176, Lviv/Ukraine;
[5] Hevko B.M. and others, (2015), Тhe study of bulk material kinematics in a screw conveyor-mixer INMATEH -Agricultural Engineering, vol. 47, no.3, pр.155-163, Bucharest/Romania;
[6] Hevko R.B. and others, (2012), Improvement of the technical level of flexible screw conveyors, Monograph, Aston, p.204, Ternopil/ Ukraine;
[7] Hevko R.B. and others, (2015), Development and investigation of reciprocating screw with flexible helical surface, INMATEH - Agricultural engineering, vol. 46, no.2. pp. 133-138, Bucharest/Romania;
[8] Hevko R.B. and others, (2016), Investigation of a transfer branch of a flexible screw conveyer, INMATEH - Agricultural Engineering, vol. 48, no. 1, pp. 29-34, Bucharest/Romania;
[9] Hevko R.B., Klendiy O.M., (2014), The investigation of the process of a screw conveyer safety device actuation, INMATEH - Agricultural Engineering, vol. 42, no.1, pp. 55-60, Bucharest/Romania;
[10] Hevko І., (2012), Mathematical model of nonlinear bending oscillations of a screw, Bulletin of TNTU, № 4 (68), pp.141–154, Ternopil/ Ukraine;
[11] Hevko І., (2012), Mathematical model of torsional oscillations of a screw, Materials of the Sixteenth Scientific Conference of TNTU named after I. Pul’uj, p. 15, Ternopil/ Ukraine;
[12] Hevko І.B., (2013), Scientific and Applied Fundamentals of Screw Transport and Technological Mechanisms Production: author's abstract of doctor’s diss. (Techn. Sciences: 05. 02.02 “Machine Knowledge”, p. 42, Lviv/Ukraine;
[13] Hevko B.M. and others, (2015), The study of bulk material kinematics in a screw conveyor-mixer, INMATEH - Agricultural Engineering, vol. 45, no. 3, pр.197 - 205, Bucharest/Romania;
[14] Loveykin V.S., Nesterov А.P., (2002), Dynamic optimization of lifting machines, Publishing house of SNU, p. 387, Luhansk/ Ukraine;
[15] Lyashuk O.L. and others, (2015), Modeling of the vertical screw conveyer loading, INMATEH INMATEH INMATEH INMATEH INMATEH -Agricultural Engineering,Agricultural Engineering, Agricultural Engineering,Agricultural Engineering,Agricultural Engineering, Agricultural Engineering,Agricultural Engineering,Agricultural Engineering,Agricultural Engineering, Agricultural Engineering,Agricultural Engineering,Agricultural Engineering, Agricultural Engineering,Agricultural Engineering,Agricultural Engineering,Agricultural Engineering, vol. 45, no. 1, pр. 87 vol. 45, no. 1, pр. 87 vol. 45, no. 1, pр. 87 vol. 45, no. 1, pр. 87 vol. 45, no. 1, pр. 87 vol. 45, no. 1, pр. 87 vol. 45, no. 1, pр. 87 vol. 45, no. 1, pр. 87 vol. 45, no. 1, pр. 87 vol. 45, no. 1, pр. 87 vol. 45, no. 1, pр. 87 -95, Bucharest95, Bucharest 95, Bucharest95, Bucharest 95, Bucharest 95, Bucharest95, Bucharest 95, Bucharest/Romania;
[16] Mytropolskyi Y.А., Lymarchenko О.S., (1998), On the question of the asymptotic approximation for the slow wave processes in nonlinear dispersive media, Ukr. mat. journal, №3 (59), pp. 357–371, Kiev/Ukraine;
[17] Oleg Lyashuk, (2016), The study on nonlinear model of dynamics of a system ‘extruder elastic auger working body’, In acta technologica agriculturae In acta technologica agriculturae In acta technologica agriculturae In acta technologica agriculturaeIn acta technologica agriculturae In acta technologica agriculturaeIn acta technologica agriculturae In acta technologica agriculturaeIn acta technologica agriculturae In acta technologica agriculturaeIn acta technologica agriculturaeIn acta technologica agriculturaeIn acta technologica agriculturae In acta technologica agriculturaeIn acta technologica agriculturaeIn acta technologica agriculturaeIn acta technologica agriculturae In acta technologica agriculturaeIn acta technologica agriculturae , no. 4, pp. 102 , no. 4, pp. 102 , no. 4, pp. 102 , no. 4, pp. 102, no. 4, pp. 102 , no. 4, pp. 102 , no. 4, pp. 102 , no. 4, pp. 102-107, Nitra/Slovak Republic;107, Nitra/Slovak Republic; 107, Nitra/Slovak Republic; 107, Nitra/Slovak Republic; 107, Nitra/Slovak Republic; 107, Nitra/Slovak Republic;107, Nitra/Slovak Republic; 107, Nitra/Slovak Republic;107, Nitra/Slovak Republic;107, Nitra/Slovak Republic;107, Nitra/Slovak Republic; 107, Nitra/Slovak Republic; 107, Nitra/Slovak Republic;107, Nitra/Slovak Republic; 107, Nitra/Slovak Republic;107, Nitra/Slovak Republic;107,
[18] Owen Philip J., Cleary Paul W., (2010), Screw conveyor performance: comparison of discrete element modelling with laboratory experiments, Progress in computational fluid dynamics, 10(5/6), pp.327-333.
[19] Rohatynskyi R. and others, (2012), Investigation of the torque fluctuations of a screw, Scientific works of the Russian University "Angel Кънчев ": Agricultural machinery and technology. Agrarian Sciences and Veterinary Medicine. Repair and reliability, Vol.51, Series 1.1, pp. pp. 42-46;
[20] Sokil M.B. and others, (2016), Dynamics of flexible elements of drive systems with variable contact point to the pulleys, INMATEH - Agricultural Engineering, vol.48, no.1, pр.119-124, Bucharest/Romania;
[21] Sun X.X., Meng W.J., Yuan Y., (2017), Design method of a vertical screw conveyor based on Taylor-Couette-Poiseuille stable helical vortex, Advances in mechanical engineering, 9(7);
[22] Tian Y., Cheng Q. and others, (2018), Research on the Principle of a New Flexible Screw Conveyor and Its Power Consumption, Applied Sciences, 8(7).
Content type: Article
Показва се в Колекции:Наукові публікації працівників кафедри автомобілів

Файлове в Този Публикация:
Файл Описание РазмерФормат 
55-04 Lyashuk.pdf949,21 kBAdobe PDFИзглед/Отваряне


Публикацияте в DSpace са защитени с авторско право, с всички права запазени, освен ако не е указно друго.

Админ Инструменти