霂瑞霂��撘����迨��辣: http://elartu.tntu.edu.ua/handle/lib/25934
Title: Determination of the parameters of transporting and mixing feed mixtures along the curvilinear paths of tubular conveyors
Other Titles: Визначення параметрів процесу транспортування та змішування кормових сумішей на криволінійних трасах трубчатих конвеєрів
Authors: Hevko, Roman Bohdanovych
Liubin, Mykola Volodymyrovych
Tokarchuk, Oleksii Anatoliiovych
Lyashuk, Oleh Leontiiovych
Pohrishchuk, Borys Vasyliovych
Klendii, Oleksandra Mykolaivna
Bibliographic description (Ukraine): Hevko R.B., Liubin M.V., Tokarchuk O.A., Lyashuk O.L., Pohrishchuk B.V., Klendii O.M. Determination of the parameters of transporting and mixing feed mixtures along the curvilinear paths of tubular conveyors // INMATEH: Agricultural engineering, vol.55, no.2, 2018, pp.97-104
Issue Date: 2018
Submitted date: 2018
Date of entry: 2-九月-2018
Publisher: INMATEH: Agricultural engineering
Place of the edition/event: Bucharest, Romania
Keywords: curvilinear path
tubular conveyor
feed mixture
transporting
mixing
scraper
Page range: 97-104
Abstract: The results of theoretical and experimental studies of simultaneous transporting and mixing the components of feed mixtures along the curvilinear paths of tubular conveyors are presented in this article. A mathematical model of the dependence of the change of elementary work performed while transporting the bulk material elementary mass along the curvilinear section is developed. Based on experimental researches, the technique of determining the technological parameters, which ensure the reduction of energy consumption while mixing bulk materials with the given quality of feed mixtures, is proposed. When considering the range of changes in the inner holes of the washers dh = 14…25 mm and the angles of their position to the horizon  = 30°…75°, the intensity of the material components passing-through and their consequent mixing increases with the increase of the value of the parameter dh and the reduction of the angle .
URI: http://elartu.tntu.edu.ua/handle/lib/25934
Copyright owner: © INMATEH: Agricultural engineering, 2018
References (Ukraine): [1] Baranovsky V.M., Hevko R.B., Dzyura V.O., Klendii O.M., Klendii M.B., Romanovsky R.M., (2018) – Justification of rational parameters of a pneumoconveyor screw feeder, INMATEH: Agricultural Engineering, vol.54, no.1, pp. 15-24, Bucharest/Romania;
[2] Haydl H.M., (1986) – Design aspects of large-diameter tubular conveyor galleries, Proceedings of the institution of civil engineers, Part 1 – Design and construction, Vol. 80, pp. 633-639, London/England;
[3] Hevko B.M., Hevko R.B., Klendii O.M., Buriak M.V., Dzyadykevych Y.V., Rozum R.I., (2018) - Improvement of machine safety devices. Acta Polytechnica, Journal of Advanced Engineering, Vol.58, no.1, pр.17-25, Prague/Czech Republic;
[4] Hevko R.B., Klendii M.B., Klendii O.M., (2016) - Investigation of a transfer branch of a flexible screw conveyer, INMATEH: Agricultural Engineering, vol.48. no.1, pp.29-34, Bucharest/Romania;
[5] Hevko R.B., Rozum R.I., Klendiy O.M. (2016) – Development of design and investigation of operation processes of loading pipes of screw conveyors, INMATEH: Agricultural engineering, vol.50, no.3, pp.89-94, Bucharest/Romania;
[6] Hevko R.B., Yazlyuk B.O., Liubin M.V., Tokarchuk O.A., Klendii O.M., Pankiv V.R., (2017) - Feasibility study of mixture transportation and stirring process in continuous-flow conveyors, INMATEH: Agricultural Engineering, vol.51, no.1, pp.49-59, Bucharest/Romania;
[7] Hevko R.B., Strishenets O.M., Lyashuk O.L., Tkachenko I.G., Klendii O.M., Dzyura V.O. (2018) – Development of a pneumatic screw conveyor design and substantiation of its parameters, INMATEH: Agricultural Engineering, vol.54, no.1, pp.153-160, Bucharest/Romania.
[8] Loveikin V., Rogatynska O., Rogatynska L., Dudun Y., (2010) - Dynamics of Screw Conveyers (Динаміка гвинтових конвеєрів), Bulletin of I.Pyliui Ternopil National Technical University (Вісник ТНТУ ім. І.Пулюя), Vol.15, pp.100-105, Ternopil/Ukraine;
[9] Loveikin V., Rogatynska L., (2011) - A Model of Loose Material Transportation by Means of High-Speed Conveyers with Elastic Operating Devices (Модель транспортування сипкого вантажу швидкохідними гвинтовими конвеєрами з еластичними робочими органами). Bulletin of I.Pyliui Ternopil National Technical University (Вісник ТНТУ ім. І.Пулюя), Vol.16, pp.66-70, Ternopil/Ukraine;
[10] Lyashuk O.L., Rogatynska O.R., Serilko D.L., (2015) - Modelling of the vertical screw conveyer loading, INMATEH Agricultural Engineering, vol. 45, no. 1, pp. 87-94, Bucharest/Romania;
[11] Manjula E.V.P.J., Hiromi W.K. Ariyaratne, Ratnayake Chandana, Morten C. Melaaen, (2017) - A review of CFD modelling studies on pneumatic conveying and challenges in modelling offshore drill cuttings transport, Powder Technology, Vol.305, pp.782-793;
[12] Naveen Tripathi, Atul Sharma, S.S. Mallick, Wypych P.W., (2015) - Energy loss at bends in the pneumatic conveying of fly ash, Particuology, vol.21, pp. 65-73;
[13] Owen Philip J., Cleary Paul W., (2010) - Screw conveyor performance: comparison of discrete element modelling with laboratory experiments. Progress in computational fluid dynamics, Vol. 10, Issue 5-6, pp.327-333, Geneva/ Switzerland;
[14] Pankiv V.R., Tokarchuk O.A., (2017) – Investigation of constructive geometrical and filling coefficients of combined grinding screw conveyor. INMATEH Agricultural Engineering, vol.51, no.1, pp.59-68, Bucharest/Romania;
[15] Rogatynska L.R., (2010) - Evaluation of Stress-Strained State of Elastic Helixes of Screw Conveyers when Loading (Оцінювання напружено-деформованого стану еластичних спіралей гвинтових конвеєрів при навантаженні), Bulletin of I. Pyliui Ternopil National Technical University (Вісник ТНТУ ім. І.Пулюя), Vol.15, pp.131-137. Ternopil/Ukraine;
[16] Rogatynska О., Liashuk О., Peleshok Т., Liubachivskyi R., (2015) - Investigation of the Process of Loose Material Transportation by Means of Inclined Screw Conveyers (Дослідження процесу транспортування сипкого вантажу похилими гвинтовими конвеєрами), Bulletin of I.Pyliui Ternopil National Technical University (Вісник ТНТУ ім. І.Пулюя), Vol.79, pp.137-143, Ternopil/Ukraine;
[17] Rohatynskyi R.М., Diachun A.I., Varian A.R., (2016) - Investigation of Kinematics of Grain Material in a Screw Conveyor with a Rotating Casing (Дослідження кінематики зернового матеріалу у гвинтовому конвеєрі із обертовим кожухом), Bulletin of Kharkiv Petro Vasylenko National Technical Univarsity of Agriculture (Вісник ХНТУСГ імю Петра Василенка №168). Vol. 168, pp.24-31. Kharkiv/Ukraine;
[18] Roberts Alan W., Bulk Solids, (2015) - Optimizing Screw Conveyors. Chemical engineering. Vol.122 (2), pp.62-67, New York/USA;
[19] Yao Y.P., Kou Z.M., Meng W.J., Han G., (2014) - Overall Performance Evaluation of Tubular Scraper Conveyors Using a TOPSIS-Based Multi-attribute Decision-Making Method, Scientific World Journal, New York/USA.
Content type: Article
�蝷箔����:Наукові публікації працівників кафедри автомобілів

��辣銝剔�﹝獢�:
獢�獢� ��膩 憭批���撘� 
55-11 Hevko.pdf760,16 kBAdobe PDF璉�閫�/撘��


�DSpace銝剜�������★��������雿��.

蝞∠�極�