霂瑞霂��撘����迨��辣: http://elartu.tntu.edu.ua/handle/lib/22939

Title: Моделювання конкурентоспроможних структур вузлів машин на прикладі збірних торцевих фрез
Other Titles: Modeling competitive structures of machine nodes on the example of sectional cutters
Authors: Нагорняк, Степан Григорович
Зеленський, Костянтин Васильович
Nagornyak, Stepan
Zelenskyy, Kostyantyn
Affiliation: Тернопільський національний технічний університет імені Івана Пулюя, Тернопіль, Україна
Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine
Bibliographic description (Ukraine): Нагорняк С. Г. Моделювання конкурентоспроможних структур вузлів машин на прикладі збірних торцевих фрез / Степан Григорович Нагорняк, Костянтин Васильович Зеленський // Галицький економічний вісник. — Т. : ТНТУ, 2017. — Том 52. — № 1. — С. 151–161. — (Загальні проблеми економіки та суб’єктів господарювання).
Bibliographic description (International): Nagornyak S., Zelenskyy K. (2017) Modeliuvannia konkurentospromozhnykh struktur vuzliv mashyn na prykladi zbirnykh tortsevykh frez [Modeling competitive structures of machine nodes on the example of sectional cutters]. Galician economic bulletin (Tern.), vol. 52, no 1, pp. 151-161 [in Ukrainian].
Is part of: Галицький економічний вісник Тернопільського національного технічного університету
Galician economic bulletin of Ternopil National Technical University
Journal/Collection: Галицький економічний вісник Тернопільського національного технічного університету
Issue: 1
Volume: 52
Issue Date: 21-十一月-2017
Submitted date: 11-十月-2017
Date of entry: 27-十二月-2017
Publisher: ТНТУ
TNTU
Place of the edition/event: Україна, Тернопіль
Ukraine, Ternopil
UDC: 338.2
621.914.22
Keywords: збірна торцева фреза
структурна схема
синтез
етап
конкурентоспроможний
sectional cutter
structural scheme
synthesis
stage
competitive
Number of pages: 11
Page range: 151-161
Start page: 151
End page: 161
Abstract: Запропоновано методологію моделювання конкурентоспроможних структур вузлів машин на прикладі збірних тоцевих фрез з пружно-демпфуючими елементами. На першому етапі запропоновано принципи побудови структурних схем торцевих фрез: 1) розтин корпусу фрези площинами і поверхнями, побудованими дискретним або неперервним поворотом формуючої лінії; 2) введення в місця розтину корпусу фрези пружно-демпфуючих елементів. Структурні схеми фрез об’єднано за однаковими принципами побудови, описано їх конкурентоспроможні характеристики й позначено відповідними елементами матриць-стрічок. На другому етапі нові структурні схеми фрез побудовано добутком елементів транспонованих матриць-стовпчиків на елементи матриць-стрічок, побудованих на першому етапі. В дію добутку елементів відповідних матриць вкладено фізичний зміст накладання одна на одну відповідних структурних схем. На наступних етапах для побудови нових структурних схем конкурентоспроможних торцевих фрез продовжено застосування дії добутку елементів матриць попередніх етапів проектування на елементи матриць-стрічок першого етапу проектування.
Reducing the negative effect of the action of variable loads is achieved by introducing elastic couplings or elastic-damping elements into drive systems of machines or directly into the design of the tool. The article proposes a methodology for modeling competitive structures of machine nodes on the example of sectional cutters with elastic-damping elements by means of a step-by-step solution the tasks of structural-scheme synthesis. At the first stage of structural-scheme synthesis the proposes a principles of construction of new competitive structural schemes of sectional cutters: 1) reduction of the moment of inertia of the masses of the drive, severely tied to the tool cutter by cutting the cutter body with planes and surfaces constructed by discrete or continuous rotation of the forming line; 2) reducing the impact of the shock load on the cutting tool by inserting the elastic-damping elements into the site of the cutting the cutter body. Structural schemes of sectional cutters are united according to the same principles of construction, their competitive characteristics are described and marked with corresponding elements of matrixes-tapes. At the second stage of structural-scheme synthesis, new structural schemes of competitive of sectional cutters are constructed by multiplying the elements of transposed matrixes-columns on the elements of matrixes-tapes constructed in the first stage. In the mathematical effect of multiplying the elements of the corresponding matrixes, the physical content of the overlapping of corresponding structural schemes and the combination of the corresponding competitive characteristics is invested. In the subsequent stages of structural-scheme synthesis for the construction of new structural schemes of competitive of sectional cutters the application of the multiplication of elements of the matrixes of the previous stages of designing on the elements of the matrixes-tapes of the first stage of designing continues. Changing the rules in applying structural elements or significantly changing the characteristics of elements in the synthesized structural schemes allows to proceed to the design of another class of competitive of sectional cutters and machine nodes.
URI: http://elartu.tntu.edu.ua/handle/lib/22939
ISSN: 2409-8892
Copyright owner: © Тернопільський національний технічний університет імені Івана Пулюя, 2017
References (Ukraine): 1. Нагорняк, С.Г. Предохранительные механизмы металлообрабатывающего оборудования: Справочник [Текст] / С.Г. Нагорняк, И.В. Луцив. – К.: Техника, 1992. – 72 с.
2. Gygax P.E. Dinamics of single-tooth milling. CIRP Annals, 1979, vol. 28, no. 1, pp. 65 – 70.
3. Нагорняк, С.Г. Синтез сборных торцовых фрез с упруго- демпфирующими элементами [Текст] / С.Г. Нагорняк, К.В. Зеленский // Изв. вузов. машиностр. – 1991. – № 10 – 12. – С. 123 – 126.
4. Нагорняк, С.Г. Снижение ударных нагрузок при торцовом фрезеровании [Текст] / С.Г. Нагорняк,К.В. Зеленский // Информатизация и новые технологии. – 1993. – № 1. – С. 30 – 31.
5. Нагорняк, С.Г. Двухфрезерная обработка деталей малой жесткости [Текст] / С.Г. Нагорняк, К.В. Зеленский // Информатизация и новые технологии. – 1993. – № 2. – С. 18 – 19.
6. Нагорняк, С.Г. N-вимірний структурно-схемний синтез вузлів систем на прикладах збірних торцьових фрез і з’єднувальних муфт з пружно-демпфуючими елементами [Текст] / С.Г. Нагорняк, К.В. Зеленский // Депоновано у ДНТБ України 22.04.1996, № 967-Ух96. – 22с.
7. Нагорняк, С.Г. Торцеві фрези з регульованим часом холостих переміщень різців [Текст] / С.Г. Нагорняк, К.В. Зеленский, В.І. Козак // Вісник Терноп. держ. техн. у-ту ім. І. Пулюя. – Тернопіль: ТДТУ. 2000. Том 5, число 2. – С. 43 – 46.
8. А. с. № 831426 СССР, МКИ В23С 5/06. Сборная торцовая фреза [Текст] / С.Г. Нагорняк – Заявлено 12.09.1979; Опубл. 23.05.1981. Бюл. № 19. – 3 с.
9. А. с. № 852460 СССР, МКИ В23С 5/06. Торцовая фреза [Текст] / С.Г. Нагорняк – Заявлено 05.06.1979; Опубл. 07.08.1981. Бюл. № 29. – 3 с.
10. А. с. № 1703295 СССР, МКИ В23С 5/06. Сборная торцовая фреза [Текст] / С.Г. Нагорняк, К.В. Зеленский – Заявлено 03.01.1990; Опубл. в Б.И. № 1, 1992. – 3 с.
11. А. с. № 1750859 СССР, МКИ В23С 5/06. Сборная торцовая фреза [Текст] / С.Г. Нагорняк, К.В. Зеленский – Заявлено 11.11.1990; Опубл. в Б.И. № 28, 1992. – 3 с.
12. А. с. № 1763103 СССР, МКИ В23С 3/00. Способ фрезерования [Текст] / С.Г. Нагорняк, К.В. Зеленский – Заявлено 23.05.1990; Опубл. в Б.И. № 35, 1992. – 4 с.
13. А. с. № 1771894 СССР, МКИ В23С 5/06. Сборная торцовая фреза [Текст] / С.Г. Нагорняк, К.В. Зеленский – Заявлено 01.02.1991; Опубл. в Б.И. № 40, 1992. – 3 с.
14. А. с. № 1780942 СССР, МКИ В23С 5/06. Сборная торцовая фреза [Текст] / С.Г. Нагорняк, К.В. Зеленский – Заявлено 04.12.1990; Опубл. в Б.И. № 46, 1992. – 4 с.
15. Деклараційний патент на винахід UA № 18023, МПК 6 В23С5/06. Збірна торцева фреза [Текст] / С.Г. Нагорняк, К.В. Зеленський, В.І. Козак – Опубл. 17.06.1997. – 3 с.
16. Деклараційний патент на винахід UA № 33197, МПК 6 В23С5/06. Збірна торцева фреза [Текст] / С.Г. Нагорняк, К.В. Зеленський, В.І. Козак – Опубл. 15.02.2001, Бюл. № 1. – 3 с.
References (International): 1. Nagornyak S.G. & Lutsiv I.V. (1992). Safety mechanisms of metal-working equipment: Directory. Kyiv, Ukraine: Tekhnika, 72 р.
2. Gygax P.E. Dinamics of single-tooth milling. CIRP Annals, 1979, vol. 28, no. 1, pp. 65 – 70.
3. Nagornyak S. Synthesis of sectional cutters with elastic damping elements, S. Nagornyak, K. Zelenskyy. Proceedings of universities. Mechanical engineering. Moscow, USSR: 1991, no. 10 – 12, pp. 123 – 126.
4. Nagornyak S. Reduction of shock loads in machining with face milling cutters, S. Nagornyak, K. Zelenskyy. Informatization and new technologies. Kyiv, Ukraine: 1993, no. 1, pp. 30 – 31.
5. Nagornyak S. Machining of parts with small stiffness by two sectional cutters, S. Nagornyak, K. Zelenskyy. Informatization and new technologies. Kyiv, Ukraine: 1993, no. 2, pp. 18 – 19.
6. Nagornyak S. N-dimensional structural-scheme synthesis of system nodes on the examples of sectional cutters and couplings with elastic damping elements, S. Nagornyak, K. Zelenskyy. Assigned to the State Scientific Technical Library. Kyiv, Ukraine: 1996, no. 967-Ух96, 22 p.
7. Nagornyak S. Sectional cutters with adjustable time of the idling displacements of cutters, S. Nagornyak, K. Zelenskyy, V. Kozak. Bulletin of the Ivan Puluj Ternopil State Technical University. Ternopil, Ukraine: 2000, no. 5 (2), pp. 43 – 46.
8. Copyright certificate № 831426. Sectional cutter, S. Nagornyak. Bulletin of inventions. Moscow, USSR: 1981, no. 19, 3 p.
9. Copyright certificate № 852460. Sectional cutter, S. Nagornyak. Bulletin of inventions. Moscow, USSR: 1981, no. 29, 3 p.
10. Copyright certificate № 1703295. Sectional cutter, S. Nagornyak, K. Zelenskyy. Bulletin of inventions. Moscow, USSR: 1992, no. 1, 3 p.
11. Copyright certificate № 1750859. Sectional cutter, S. Nagornyak, K. Zelenskyy. Bulletin of inventions. Moscow, USSR: 1992, no. 28, 3 p.
12. Copyright certificate № 1763103. The method of machining with sectional cutters, S. Nagornyak, K. Zelenskyy. Bulletin of inventions. Moscow, USSR: 1992, no. 35, 4 p.
13. Copyright certificate № 1771894. Sectional cutter, S. Nagornyak, K. Zelenskyy. Bulletin of inventions. Moscow, USSR: 1992, no. 40, 3 p.
14. Copyright certificate № 1780942. Sectional cutter, S. Nagornyak, K. Zelenskyy. Bulletin of inventions. Moscow, USSR: 1992, no. 46, 4 p.
15. Declarative patent for invention № 18023. Sectional cutter, S. Nagornyak, K. Zelenskyy, V. Kozak. Bulletin of inventions. Kyiv, Ukraine: 1997, 3 p.
16. Declarative patent for invention № 33197. Sectional cutter, S. Nagornyak, K. Zelenskyy, V. Kozak. Bulletin of inventions. Kyiv, Ukraine: 2001, no. 1, 3 p.
Content type: Article
�蝷箔����:Галицький економічний вісник, 2017, № 1 (52)



�DSpace銝剜�������★��������雿��.