Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam: http://elartu.tntu.edu.ua/handle/lib/22373

Název: Properties of esr steel, melted to a bifilar scheme using hard start correspond
Další názvy: Властивості електрошлакової сталі, переплавленої за біфілярною схемою з використанням твердого старту
Autoři: Власов, Анатолій Федорович
Макаренко, Наталья Олексіївна
Голуб, Денис Михайлович
Гринь, Олександр Володимирович
Пліс, Сергій Григорович
Chyhariov, Valerii
Vlasov, Anatoliy
Makarenko, Natalia
Golub, Denys
Hryn', Oleksandr
Plis, Sergii
Affiliation: ДВНЗ «Приазовський державний технічний університет», Маріуполь, Україна;
Донбаська державна машинобудівна академія, Краматорськ, Україна
SHEI «Pryazovskyi State Technical University», Mariupol, Ukraine;
Donbass state engineering academy, Kramatorsk, Ukrai
Bibliographic description (Ukraine): Properties of esr steel, melted to a bifilar scheme using hard start correspond / Valerii Chyhariov, Anatoliy Vlasov, Natalia Makarenko, Denys Golub, Oleksandr Hryn', Sergii Plis // Вісник ТНТУ. — Т. : ТНТУ, 2017. — Том 86. — № 2. — С. 21–31. — (Механіка та матеріалознавство).
Bibliographic description (International): Chyhariov V., Vlasov A., Makarenko N., Golub D., Hryn' O., Plis S. (2017) Properties of esr steel, melted to a bifilar scheme using hard start correspond. Scientific Journal of TNTU (Tern.), vol. 86, no 2, pp. 21-31 [in English].
Is part of: Вісник Тернопільського національного технічного університету
Scientific Journal of the Ternopil National Technical University
Journal/Collection: Вісник Тернопільського національного технічного університету
Issue: 2
Volume: 86
Datum vydání: 27-říj-2017
Submitted date: 5-čer-2017
Date of entry: 7-lis-2017
Nakladatel: ТНТУ
TNTU
Place of the edition/event: Україна, Тернопіль
Ukraine, Ternopil
UDC: 621. 791.G21.73
Klíčová slova: електрошлакове лиття
екзотермічний флюс
окалина
scale
exothermal flux
electroslag casting
Number of pages: 11
Page range: 21-31
Start page: 21
End page: 31
Abstrakt: Властивості литої електрошлакової сталі 5ХНМ, виплавленої по біфілярній схемі з використанням твердого старту, відповідають властивостям кованого металу відкритої виплавки й дозволяють застосовувати литі штампові кубики замість кутих. Експериментальними методами встановлено, що як компонент екзотермічної суміші доцільне використання окалини, що є відходом ковальско-пресового виробництва. Застосування розроблених способів еэлектрошлакового лиття (переплаву) з використанням твердого старту й екзотермічного легованого флюсу дозволяє інтенсифікувати електрошлакові процеси. Фізико-хімічні властивості відновленого металу з екзотермічного легованого флюсу сталей марок 9ХФ, 9Х2МФ, 5ХНМ і 60Х2СМФ у нижній частині злитка відповідають тим же показникам у середній і верхній частинах.
The properties of cast electroslag steel 5XНM made to a bifilar scheme using a hard start correspond to the properties of the cast metal melted openly and allow to use die blocks instead of forged ones. It is experimentally found that scale being the press forging waste would be appropriate for use as a component of the exothermal mixture. The developed techniques for electroslag casting (remelting) using a hard start and exothermal alloyed flux make it possible to intensify the electroslag processes. Physical and chemical properties of the metal reduced from exothermal alloyed flux of 9XФ, 9Х2MФ, 5ХНМ and 60Х2СМФ steel are the bottom of the ingot the same as in the midlle and at the top.
URI: http://elartu.tntu.edu.ua/handle/lib/22373
ISSN: 1727-7108
Copyright owner: © Тернопільський національний технічний університет імені Івана Пулюя, 2017
References (International): 1. Karpenko V.M., Vlasov A.F., Bilyk G.B. Indicators of fusion welding electrodes with exothermic mixtures in the coating mixture. Welding production. No. 9 (1980), pp. 23 – 25.
2. Ioffe I.S., Kuznetsov O.V. St. Petersburg, VM: Effect titanotermitnoy mixture as a part of the electrode coverage, on increasing of productivity. Welding production. No. 3 (1980), pp. 26 – 28.
3. Zarechenskiy A.V., Leszczynskiy L.K., Chigarev V.V. Features of melting powder tapes with a thermic mixtures. Welding Production. No. 8 (1985), pp. 39 – 41.
4. Chigarev V.V., Zarechenskiy D.A., Bilyk A.G. Features of melting powder tapes exothermic mixtures of filler. The Paton Welding Journal. No. 2 (2007), pp. 53 – 55.
5. Latash J.V., Medovar B.I. The ESR. K.: Metallurgiya.1970, 239 p.
6. Patent 1225783 England. The way of electroslag remelting. Appl. 26.04.1967, no. 1181663, publ. 24.03.1971. MKI V22D, 23/06.
7. Koshevoy A.D., Presnyakov V.A. Improvement of processes and equipment for pressure working in engineering and metallurgy. Collection of scientific papers. Kramatorsk-Slov'yansk, 2000, pp. 473 – 476.
8. Grinuk V.S., Saenko V.J., Medovar B.I. Production of large pieces of die method ESHL, etc. Probl. spec. electrometallurgy. 1978, issue 8, pp. 31 – 38.
9. Electrometal, Ed. B.E. Patona. Kiev: Nauk. dumka, 1981, 679 p.
10. Fedorov A.V. New methods for analysis of metal powders and slags. Moscow: Metallurgy, 1971, 248 p.
11. Goncharov Y.E. Microstructure and mechanical properties of the furnace and air-scale. Metal forming. Working Papers. Dnepropetrovsk Metallurgical Institute. MM: metallurgical Gia, 1967, pp. 208 – 220.
12. Yakovlev P.J., Yakovleva E.F. Technical analysis in metallurgy. Moscow: Metallurgizdat, 1963, 288 p.
13. Pat. 36618A, Ukraine, MCI V23K 25/00. The way of electroslag welding, Karpenko V.M., Vlasov A.F. Stated 13.01.00 no. 200001024; publ.16.01.01, bull. no. 3.
14. Vlasov A.F., Karpenko V.M., Lysak V.K. Quality research of die cast electroslag steel 5ХНМ. Improvement of processes and equipment for pressure working in engineering and metallurgy. Collection of scientific papers. Prace. DSEA. Kramatorsk 2004, pp. 139 – 144.
15. Stepanov M.N. Statistical analysis of mechanical testing. M: K-machine-engineering, 1972, 292 p.
16. Kudryavtsev I.V., Naumchenkov N.E., Savvina N.M. Tired of large machine parts. M: Machine-building. 1981, 240 p. 17. Vlasov A.F., Karpenko V.M., Bilyk G.B., Veremey O.V. Physic-chemical properties of rolling steel 9HF, 9H2ÌF and 60H2SÌF. Improvement of processes and equipment for pressure working in engineering and metallurgy. Collection of scientific papers. Herald of DSEA. Kramatorsk. 2004, pp. 643 – 646.
Content type: Article
Vyskytuje se v kolekcích:Вісник ТНТУ, 2017, № 2 (86)



Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.