กรุณาใช้ตัวระบุนี้เพื่ออ้างอิงหรือเชื่อมต่อรายการนี้: http://elartu.tntu.edu.ua/handle/lib/21961

ชื่อเรื่อง: Analysis of Inner Surface Roughness Parameters of Loadcarrying and Support Elements of Mechanical Systems
ผู้แต่ง: Dzyura, Volodymyr
Maruschak, Pavlo
Zakiev, I. M.
Sorochak, Andriy
Дзюра, Володимир Олексійович
Марущак, Павло Орестович
Закієв, Іслам Мусаєвич
Сорочак, Андрій Петрович
Bibliographic description (Ukraine): V. O. Dzyura, P. O. Maruschak, I. M. Zakiev, A. P. Sorochak, Analysis of Inner Surface Roughness Parameters of Loadcarrying and Support Elements of Mechanical Systems, International Journal of Engineering (IJE),TRANSACTIONS B: Applications Vol. 30, No. 8, (August 2017) 1170-1175
Journal/Collection: International Journal of Engineering
Issue: 8
Volume: 30
วันที่เผยแพร่: สิง-2017
Date of entry: 10-ตุล-2017
Number of pages: 6
Page range: 1170-1175
Start page: 1170
End page: 1175
บทคัดย่อ: This paper is based on the concept of physical mesomechanics, which allows any plastic shear in the stressed body to be considered as a loss of shear stability of the material in local stress concentration zones. This approach, which is physically very well-grounded, allowed us to consider from one standpoint the processes of machining by cutting and wear of steels. Physical and mechanical regularities in the effect of certain processing operations on the shape and roughness of the hydraulic cylinder surface are found. The mechanisms of the spatial self-organization of the relief and surface of bearings under conditions of false brinelling are summarized and analyzed. The data obtained can be used for further scientific generalization or prediction and diagnostics of the surface condition of loadcarrying and support elements of mechanical systems under study.
URI: http://elartu.tntu.edu.ua/handle/lib/21961
References (Ukraine): Panin, V.E., Panin, A., Moiseenko, D., Elsukova, T., Kuzina, O.Y. and Maksimov, P., "The chess-board effect in the stressstrain distribution at interfaces of a loaded solid", in Doklady Physics, Springer. Vol. 51, (2006), 408-411.
Dimkovski, Z., Anderberg, C., Rosén, B.-G., Ohlsson, R. and Thomas, T., "Quantification of the cold worked material inside the deep honing grooves on cylinder liner surfaces and its effect on wear", Wear, Vol. 267, No. 12, (2009), 2235-2242.
Panin, V.E., Moiseenko, D., Maksimov, P. and Panin, A., "Physical mesomechanics of a deformed solid as a multilevel system. Iii. Inelastic precursor of plastic shear generation", Physical Mesomechanics, Vol. 10, No. 1-2, (2007), 15-24.
Maruschak, P., Panin, S.V., Zakiev, I., Poltaranin, M. and Sotnikov, A., "Scale levels of damage to the raceway of a spherical roller bearing", Engineering Failure Analysis, Vol. 59, (2016), 69-78.
Maruschak, P., Zakiev, I., Mocharsky, V. and Nikiforov, Y., "Experimental study of the surface of steel 15Kh13MF after the nanosecond laser shock processing", in Solid State Phenomena, Trans Tech Publ. Vol. 200, (2013), 60-65.
Kryvyi, P.D., Dzyura, V.O., Tymoshenko, N.M. and Krupa, V.V., "Technological heredity and accuracy of the cross-seсtion shapes of the hydro-cylinder cylindrical surfaces", Canadian Journal of Science, Education and Culture, Vol. 1, (2014), 301-308.
Costes, J.P. and Moreau, V., "Surface roughness prediction in milling based on tool displacements", Journal of Manufacturing Processes, Vol. 13, No. 2, (2011), 133-140.
Kolmogorov, V., "Friction and wear model for a heavily loaded sliding pair. Part i. Metal damage and fracture model", Wear, Vol. 194, No. 1-2, (1996), 71-79.
Bhadeshia, H., "Steels for bearings", Progress in materials Science, Vol. 57, No. 2, (2012), 268-435.
Kolmogorov, V., Fedotov, V. and Spevak, L., "A mathematical model for the formation and development of defects in metals", Studies in Applied Mechanics, Vol. 45, (1997), 51-60.
Organisciak, M., Cavallaro, G. and Lubrecht, A., "Starved hydrodynamic lubrication of the piston ring cylinder liner contact: Preliminary study of the influence of surface texturing", Tribology and Interface Engineering Series, Vol. 48, (2005), 573-583.
Izmailov, V. and Kourova, M., "Correlation between surface topography and profile statistical parameters", Wear, Vol. 59, No. 2, (1980), 409-420.
Sotnykov, O., Rodionov, M., Maruschak, P., Brezinová, J., Guzanová, A. and Apostol, Y., "Failure analysis of the hingelever mould oscillator bearings of the continuous casting machine", Strength, Fracture and Complexity, Vol. 8, No. 3, (2014), 135-143.
Lytvynenko, I., Maruschak, P. and Lupenko, S., "Processing and modeling of ordered relief at the surface of heat-resistant steels after laser irradiation as a cyclic random process", Automatic Control and Computer Sciences, Vol. 48, No. 1, (2014), 1-9.
Content type: Article
ปรากฏในกลุ่มข้อมูล:Наукові публікації працівників кафедри транспортних технологій та механіки

แฟ้มในรายการข้อมูลนี้:
แฟ้ม รายละเอียด ขนาดรูปแบบ 
30-8-8.pdfAnalysis of Inner Surface1,33 MBAdobe PDFดู/เปิด
30-8-8.djvu370,87 kBDjVuดู/เปิด
30-8-8__COVER.png379,37 kBimage/pngดู/เปิด


รายการทั้งหมดในระบบคิดีได้รับการคุ้มครองลิขสิทธิ์ มีการสงวนสิทธิ์เว้นแต่ที่ระบุไว้เป็นอื่น

เครื่องมือสำหรับผู้ดูแลระบบ