Bu öğeden alıntı yapmak, öğeye bağlanmak için bu tanımlayıcıyı kullanınız:
http://elartu.tntu.edu.ua/handle/123456789/6144
| Başlık: | Optimization of induction hardfacing of thin discs, allowing for thermal and electromagnetic shielding |
| Diğer Başlıklar: | Оптимизация индукционной наплавки тонких дисков с учетом теплового и электромагнитного экранирования Оптимізація індукційного наплавлення тонких дисків з урахуванням теплового та електромагнітного екранування |
| Yazarlar: | Shably, O.M. Pulka, Ch.V. Pismenny, A.S. Шаблій, Олег Миколайович Пулька, Чеслав Вікторович Письменний, Олександр Семенович |
| Affiliation: | I. Pulyuj Ternopil State Technical University, Ternopil, Ukraine E.O. Paton Electric Welding Institute, NASU, Kyiv, Ukraine |
| Bibliographic description (Ukraine): | O.M. Shably Ch.V. Pulka and A.S. Pismenny. Optimization of induction hardfacing of thin discs, allowing for thermal and electromagnetic shielding. 9/2003. P. 20-23. |
| Is part of: | The Paton Welding Journal Автоматическая сварка |
| Yayın Tarihi: | 2003 |
| Date of entry: | 7-Kas-2015 |
| Anahtar kelimeler: | induction hard facing thin discs two-turn ring inductor optimizing the inductor parameters temperature field thermal and electromagnetic shielding investigations calculations |
| Page range: | 20-23 |
| Özet: | A mathematical model has been developed to determine the temperature field in the process of disc hardfacing using a two-turn ring inductor with allowance for thermal and electromagnetic shielding. This model enables optimizing the mentioned temperature in the zone of disc hardfacing depending on the parameters of the inductor, disc, electromagnetic and thermal shields, as well as electric current. |
| URI: | http://elartu.tntu.edu.ua/handle/123456789/6144 |
| References (Ukraine): | 1. Shably, O.M., Pulka, Ch.V., Pismenny, A.S. (2002) Optimisation of inductor parameters for uniform heating of discs across the width of the hard facing zone, allowing for screening. The Paton Welding J., 11, 23-25. 2. Shably, O.N., Pulka, Ch.V., Mikhajlishin, M.S. et al. Device for power control in zone of hard facing. Positive decision on issuing of patent on application 2002119491. Filed 28.11.02. 3. Shably, O.N., Pulka, Ch.V., Pismenny, A.S. (1997) Optimisation of design parameters of inductor for induction hard facing of thin steel discs. Avtmatich. Svarka, 6, 17-20. 4. Shably, O.N., Pulka, Ch.V., Budzan, B.P. (1987) Optimisation of power consumption during induction hard facing of thin-walled discs. Ibid., 1, 36-39. 5. Semyonov, N.A. (1973) Technical electrodynamics. Moscow: Svyaz. 6. Isachenko, V.P., Osipova, V.A., Sukomel, A.S. (1981) Heat transfer. 4 th ed. Moscow : Energoizdat. |
| Content type: | Article |
| Koleksiyonlarda Görünür: | Наукові публікації працівників кафедри технології та обладнання зварювального виробництва |
Bu öğenin dosyaları:
| Dosya | Açıklama | Boyut | Biçim | |
|---|---|---|---|---|
| 004.pdf | 3,29 MB | Adobe PDF | Göster/Aç | |
| 004.djvu | 2,27 MB | DjVu | Göster/Aç | |
| 004__COVER.png | 1,06 MB | image/png | Göster/Aç |
DSpace'deki bütün öğeler, aksi belirtilmedikçe, tüm hakları saklı tutulmak şartıyla telif hakkı ile korunmaktadır.
Yönetim Araçları