このアイテムの引用には次の識別子を使用してください: http://elartu.tntu.edu.ua/handle/123456789/6008

タイトル: Вплив залишкових напружень після дорнування отвору на НДС пластини за одновісного циклічного розтягу
著者: Гладьо, Сергій Володимирович
Пиндус, Юрій Іванович
Affiliation: Тернопільський національний технічний університет імені Івана Пулюя
Bibliographic description (Ukraine): Ясній П. В. Вплив залишкових напружень після дорнування отвору на НДС пластини за одновісного циклічного розтягу / П. Ясній, С. Гладьо, Ю. Пиндус // IV міжнародна науково-технічна конференція „Пошкодження матеріалів під час експлуатації, методи його діагностування і прогнозування“ — Тернопіль : Вид-во ТНТУ імені Івана Пулюя, 2015. — С. 252-255. — (Оцінювання залишкового ресурсу елементів конструкцій).
Bibliographic description (International): Yasnii P. V., Hlado S. V., Pyndus Yu. I. Vplyv zalyshkovykh napruzhen pislia dornuvannia otvoru na NDS plastyny za odnovisnoho tsyklichnoho roztiahu. International Conference "In-Service Damage of Materials, its Diagnostics and Prediction", Ternopil, TNTU, 2015, P. 252-255 [in Ukrainian].
Is part of: Матеріали IV міжнародної науково-технічної конференції „Пошкодження матеріалів під час експлуатації, методи його діагностування і прогнозування“
発行日: 21-9月-2015
Date of entry: 28-10月-2015
出版者: Вид-во ТНТУ імені Івана Пулюя
Place of the edition/event: Тернопіль
Ternopil
Page range: 252-255
抄録: The basic regularities of cold expansion rate and the diameter of the hole on the formation of local compressive residual stresses in the threshold of functional holes have been found. Dependences of the local compressive residual stresses on the burnishing tension have been built. To calculate the stress strain state in the threshold of the functional hole after burnishing with different tension and cyclic loading finite-element models of a quarter of the sample with a central hole were built.
URI: http://elartu.tntu.edu.ua/handle/123456789/6008
Copyright owner: © Тернопільський національний технічний університет імені Івана Пулюя, 2015
References (Ukraine): 1.Pasta S. Fatigue crack propagation from a cold-worked hole // Engng. Fract. Mech. – 2007. – № 74. – P. 1525–1538.
2.Степанова Т. Ю. Технологии поверхностного упрочнения деталей машин: Уч. пос. – Іваново: Ивановск. гос. хим.-техн. ун-т, 2009. – 64 с.
3.Ясній П., Гладьо С. Вплив дорнування отворів на зародження та поширення втомних тріщин в алюмінієвому сплаві // Вісник Терноп. нац. техн. ун-ту ім. Івана Пулюя. – 2014. – № 1. – С. 7–17.
4.Cold expansion of holes and resulting fatigue life enhancement and residual stresses in Al 2024 T3 alloy / H. D. Gopalakrishna, H. N. NarasimhaMurthy, M. Krishna et al. // Anexperimental study. Engng. Failure Analysis. – 2010. – 17. – P. 361–368.
5.Thomas-Peter Fries and Malak Baydoun. Crack propagation with the extended finite element method and a hybrid explicit–implicit crack description // Int. J. Numerical Methods in Engng. – 2012. – 89, № 12. – P. 1527–1558.
6.The benefit from an adequate finite element simulation of the cold hole expansion / J. T. Maximov, G. V. Duncheva, N. Ganev, and T. N. Bakalova // Engng. Failure Analysis. – 2009. – 16. – P. 503–511.
7.Mohanty J.R., Verma B.B., and Ray P.K. Prediction of fatigue crack growth and residual life using an exponential model: part II (mode-I overload induced retardation) // Int. J. Fatigue. – 2009. – 31. – P. 425–432.
8.Дащенко А. Ф., Лазарева Д. В., Сурьянинов Н. Г. ANSYS в задачах инженерной механики. – Одесса: Астропринт, 2007. – 484 с.
9.Steinberg D. J., Cochran S. G., and Guinan M. W. A constitutive model for metals applicable at high-strain rate // J. Appl. Phys. – 1980. – 51, № 3. – P. 1498–1504.
References (International): 1.Pasta S. Fatigue crack propagation from a cold-worked hole, Engng. Fract. Mech. – 2007. – No 74. – P. 1525–1538.
2.Stepanova T. Yu. Tekhnolohyy poverkhnostnoho uprochnenyia detalei mashyn: Uch. pos. – Ivanovo: Yvanovsk. hos. khym.-tekhn. un-t, 2009. – 64 p.
3.Yasnii P., Hlado S. Vplyv dornuvannia otvoriv na zarodzhennia ta poshyrennia vtomnykh trishchyn v aliuminiievomu splavi, Visnyk Ternop. nats. tekhn. un-tu im. Ivana Puliuia. – 2014. – No 1. – P. 7–17.
4.Cold expansion of holes and resulting fatigue life enhancement and residual stresses in Al 2024 T3 alloy, H. D. Gopalakrishna, H. N. NarasimhaMurthy, M. Krishna et al., Anexperimental study. Engng. Failure Analysis. – 2010. – 17. – P. 361–368.
5.Thomas-Peter Fries and Malak Baydoun. Crack propagation with the extended finite element method and a hybrid explicit–implicit crack description, Int. J. Numerical Methods in Engng. – 2012. – 89, No 12. – P. 1527–1558.
6.The benefit from an adequate finite element simulation of the cold hole expansion, J. T. Maximov, G. V. Duncheva, N. Ganev, and T. N. Bakalova, Engng. Failure Analysis. – 2009. – 16. – P. 503–511.
7.Mohanty J.R., Verma B.B., and Ray P.K. Prediction of fatigue crack growth and residual life using an exponential model: part II (mode-I overload induced retardation), Int. J. Fatigue. – 2009. – 31. – P. 425–432.
8.Dashchenko A. F., Lazareva D. V., Surianinov N. H. ANSYS v zadachakh inzhenernoi mekhaniki. – Odessa: Astroprint, 2007. – 484 p.
9.Steinberg D. J., Cochran S. G., and Guinan M. W. A constitutive model for metals applicable at high-strain rate, J. Appl. Phys. – 1980. – 51, No 3. – P. 1498–1504.
Content type: Article
出現コレクション:Конференція „Пошкодження матеріалів під час експлуатації, методи його діагностування і прогнозування“ (2015)



このリポジトリに保管されているアイテムはすべて著作権により保護されています。