Empreu aquest identificador per citar o enllaçar aquest ítem:
http://elartu.tntu.edu.ua/handle/123456789/1795
Títol: | Дослідження формоутворення сферичних поверхонь на верстатах токарної групи |
Altres títols: | Research of forming process of spherical surfaces Lathes Group |
Autor: | Підгурський, Микола Іванович Левкович, Михайло Геннадійович Лясота, Оксана Михайлівна Pidgyrsky, N. Levkovich, M. Lyasota, O. |
Bibliographic description (Ukraine): | М. Підгурський. Досліджень формоутворення сферичних поверхонь на верстатах токарної групи / М.Підгурський, М.Левкович, О.Лясота // ТНТУ — 2012. |
Data de publicació: | 2012 |
Date of entry: | 19-d’o-2012 |
Editorial: | Тернопільський національний технічний університет ім. Івана Пулюя |
UDC: | 621.87 |
Resum: | В роботі досліджено вплив геометричних параметрів вузлів та деталей запропонованого пристрою — інструменту, точність їх взаємного розташування, а також точність розміщення осей напрямних оснащення на процес формоутворення сферичних поверхонь. In this paper the impact of geometric parameters of proposing units and details is research. Precision of relative positioning of guide axles of tooling on the forming process of spherical surfaces is determined. |
URI: | http://elartu.tntu.edu.ua/handle/123456789/1795 |
Content type: | Article |
Apareix a les col·leccions: | Матеріали інших конференцій, семінарів, читань |
Arxius per aquest ítem:
Els ítems de DSpace es troben protegits per copyright, amb tots els drets reservats, sempre i quan no s’indiqui el contrari.