Por favor, use este identificador para citar o enlazar este ítem: http://elartu.tntu.edu.ua/handle/123456789/117

Título : Вплив термокомпресійної обробки на мікроструктуру і механічні властивості твердих сплавів на основі TiC – (VC, NbC, WC)
Otros títulos : The influence of the termal-compression treatment on the microstructure and mechanical properties of TiC – (VC, NbC, WC) based hard alloys
Autor : Мариненко, Сергій Юрійович
Бодрова, Людмила Гордіївна
Прокопів, М.
Крамар, Галина Михайлівна
Лазарюк, Валерій Володимирович
Marynenko, S.
Bodrova, L.
Prokopiv, M.
Kramar, G.
Lazaryuk, V.
Bibliographic description (Ukraine): Мариненко С., Бодрова Л., Прокопів М., Крамар Г., Лазарюк В. Вплив термокомпресійної обробки на мікроструктуру і механічні властивості твердих сплавів на основі TiC – (VC, NbC, WC) // Вісник ТДТУ. – 2008. - Том 13. - №4. – ст.. 40-48. – (механіка та матеріалознавство).
Fecha de publicación : 10-nov-2008
Date of entry: 23-ene-2009
Editorial : Тернопільський державний технічний університет ім. Івана Пулюя
Palabras clave : механіка
матеріалознавство
materials science
mechanics
Resumen : Досліджено вплив технології отримання на формування мікроструктури сплаву TiC – (VC, NbC, WC) - Ni-Cr з різним вмістом карбіду WC. Сплави отримано безпосереднім введенням карбідів у шихту, з додатковою операцією попереднього синтезу карбідів, з термокомпресійною обробкою під тиском газу 3 МПа, сплавів, отриманих за першою та другою технологіями. Виявлено двозонний периферійний шар карбідних зерен, зумовлений наявністю у сплаві карбіду вольфраму. Досліджено механічні властивості сплавів у залежності від технології виготовлення та хімічного складу.
The influence of manufacturing technology on the microstructure of TiC – (VC, NbC, WC) –Ni-Cr alloys with different content of WC was investigated. The alloys are obtained by adding the carbides into the mix, with the additional operation of the preliminary carbide synthesis and the termal-compression treatment under gas pressure of 3MPa of the alloys obtained by the first and the second techniques. The two rim perifery carbide grains layer caused by the availability of WC in the alloy was found. The alloys mechanical properties depending on the manufacturing technology and chemical composition have been investigated.
URI : http://dspace.tstu.edu.ua/handle/123456789/117
Content type: Article
Aparece en las colecciones: Вісник ТДТУ, 2008, том 13, № 4



Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.