DSpace Зібрання: Міжнародна науково-технічна конференція „Міцність і довговічність сучасних матеріалів та конструкцій“ присвячена 70-річчю від дня народження член-кореспондента НАН України, проф. Яснія Петра Володимировича (Тернопіль, 10 – 11 листопада 2022 року)Міжнародна науково-технічна конференція „Міцність і довговічність сучасних матеріалів та конструкцій“ присвячена 70-річчю від дня народження член-кореспондента НАН України, проф. Яснія Петра Володимировича (Тернопіль, 10 – 11 листопада 2022 року)http://elartu.tntu.edu.ua/handle/lib/390622024-03-28T10:18:02Z2024-03-28T10:18:02ZДля нотатокhttp://elartu.tntu.edu.ua/handle/lib/391762022-12-05T15:56:37Z2022-11-10T00:00:00ZНазва: Для нотаток2022-11-10T00:00:00ZВизначення енергетичних характеристик руйнування та їх анізотропії за результатами ударних випробувань зразків різних типів зі сталі 15Х2НМФАКравчук, А. В.Кондряков, Євген ОлександровичХарченко, Валерій ВолодимировичБогомолов, А. В.Kravchuk, AndriyKondryakov, IevgenKharchenko, ValeriyBogomolov, Anatoliyhttp://elartu.tntu.edu.ua/handle/lib/391752022-12-05T15:56:39Z2022-11-10T00:00:00ZНазва: Визначення енергетичних характеристик руйнування та їх анізотропії за результатами ударних випробувань зразків різних типів зі сталі 15Х2НМФА
Автори: Кравчук, А. В.; Кондряков, Євген Олександрович; Харченко, Валерій Володимирович; Богомолов, А. В.; Kravchuk, Andriy; Kondryakov, Ievgen; Kharchenko, Valeriy; Bogomolov, Anatoliy
Короткий огляд (реферат): The paper presents the impact tests results of different specimen’s types from reactor pressure vessel steel 15Kh2NMFA. The standard Charpy specimens, sub-size
specimens and side-grooved specimens, which were cut in three different directions were used for determination of fracture energy characteristics and their anisotropy. The full
deformation and fracture energies and its components as well as crack propagation velocities were obtained using instrumented vertical drop weight impact testing machinSenchishin V.e equipped by high-speed recording system2022-11-10T00:00:00ZЗмістhttp://elartu.tntu.edu.ua/handle/lib/391772022-12-05T15:56:38Z2022-11-10T00:00:00ZНазва: Зміст2022-11-10T00:00:00ZДослідження передумов виникнення та візуального виявлення поверхневих задирок на фрезерованих гранях пакування з екструдованого пінополістиролуНесін, В.Nesin, V.http://elartu.tntu.edu.ua/handle/lib/391722022-12-05T15:56:34Z2022-11-10T00:00:00ZНазва: Дослідження передумов виникнення та візуального виявлення поверхневих задирок на фрезерованих гранях пакування з екструдованого пінополістиролу
Автори: Несін, В.; Nesin, V.
Короткий огляд (реферат): The use of extruded polystyrene foam as packaging. Special milling of porous material. The formation of a rough, soft surface. Surface structure model. Formation of small
particles of extruded polystyrene foam. Removal of small particles of material from a rough surface. Formation of surface burrs on milled faces. Description of an abstract model of burrs on milled faces. Definition of standard and addition special conditions for visual detection of
burrs.2022-11-10T00:00:00ZДослідження деструктивних факторів які визначають пошкодження бетонуКісіль, В.Каспрук, Володимир БогдановичKisil, V.Kaspruk, V.http://elartu.tntu.edu.ua/handle/lib/391742022-12-05T15:56:36Z2022-11-10T00:00:00ZНазва: Дослідження деструктивних факторів які визначають пошкодження бетону
Автори: Кісіль, В.; Каспрук, Володимир Богданович; Kisil, V.; Kaspruk, V.
Короткий огляд (реферат): The process of carbonization of the surface of concrete and reinforced concrete products and structures in construction structures and buildings gradually causes the
accumulation of various types of defects that affect their operational capabilities to one degree or another. Physical wear and tear leads to loss of reliability and durability of the structure due to the development of aging defects and deterioration of material properties2022-11-10T00:00:00ZЕкспериментальне дослідження ефективності засобу захисту від вітрового навантаженняЦибульник, С.Мироненко, П.Паздрій, О.Tsybulnyk, S.Myronenko, P.Pazdrii, O.http://elartu.tntu.edu.ua/handle/lib/391692022-12-05T15:56:32Z2022-11-10T00:00:00ZНазва: Експериментальне дослідження ефективності засобу захисту від вітрового навантаження
Автори: Цибульник, С.; Мироненко, П.; Паздрій, О.; Tsybulnyk, S.; Myronenko, P.; Pazdrii, O.
Короткий огляд (реферат): In the conditions of the Antarctic, the problem of ensuring the reliability of critical infrastructure facilities is very acute. One of the structures, which has high requirements for operational safety at the antarctic Vernadsky station, is a vertical steel tank. Therefore, this
work presents the results of an experimental study of the effectiveness of a means of protecting the tank against wind load2022-11-10T00:00:00ZЗагальні принципи діагностування пошкоджуваності будівельних конструкційДанильченко, Світлана МихайлівнаЧорномаз, Наталія ЮріївнаDanulchenko, S. M.Chornomaz, N. U.http://elartu.tntu.edu.ua/handle/lib/391732022-12-05T15:56:35Z2022-11-10T00:00:00ZНазва: Загальні принципи діагностування пошкоджуваності будівельних конструкцій
Автори: Данильченко, Світлана Михайлівна; Чорномаз, Наталія Юріївна; Danulchenko, S. M.; Chornomaz, N. U.
Короткий огляд (реферат): Inspection of existing buildings is an extremely responsible task. Because, it is necessary to carefully identify all existing damages, systematize them, single out the
scholastic and most significant influences, establish their cause and mechanism of action.
That is why a team of the most qualified and experienced workers who have the necessary knowledge and clearly understand the essence of the task are involved in such works2022-11-10T00:00:00ZВплив деградації характеристик фізико-механічних властивостей на кінетику пошкоджуваності матеріалу в умовах циклічного навантаженняБулах, П.Масло, О.Швець, В.Bulakh, P.Maslo, O.Shvets, V.http://elartu.tntu.edu.ua/handle/lib/391702022-12-05T15:56:33Z2022-11-10T00:00:00ZНазва: Вплив деградації характеристик фізико-механічних властивостей на кінетику пошкоджуваності матеріалу в умовах циклічного навантаження
Автори: Булах, П.; Масло, О.; Швець, В.; Bulakh, P.; Maslo, O.; Shvets, V.
Короткий огляд (реферат): The article shows that at deformations of the material, the level of which exceeds the deformation corresponding to the limit of proportionality, the modulus of
elasticity of the first kind and the homogeneity parameter of the material, which was determined by the LM-hardness method, are in a correlation relationship2022-11-10T00:00:00ZДослідження вимушених згинних коливань композитного стрижня з поперечною тріщиноюОнищенко, Є.Деркач, О.Матвєєв, В.Onyshchenko, Ye.Derkach, O.Matveev, V.http://elartu.tntu.edu.ua/handle/lib/391682022-12-05T15:56:31Z2022-11-10T00:00:00ZНазва: Дослідження вимушених згинних коливань композитного стрижня з поперечною тріщиною
Автори: Онищенко, Є.; Деркач, О.; Матвєєв, В.; Onyshchenko, Ye.; Derkach, O.; Matveev, V.
Короткий огляд (реферат): Analytical and numerical methods for determining vibrodiagnostic parameters of the presence of closing transverse crack in a carbon fibre reinforced composite beam are presented. The results of calculation investigations aimed at the determination of the influence of a transverse breathing crack on the natural frequency of vibrations and the dominant harmonics amplitudes ratio at the main, super- and subharmonic resonances of composite cantilever beam flexural vibrations are presented2022-11-10T00:00:00ZВплив частоти вібрацій та якості освітлення на кількісні показники дефектів, виявлених на поверхні металопрокату з застосуванням глибоких нейронних мережКоноваленко, Ігор ВолодимировичМарущак, Павло ОрестовичКозбур, Галина ВолодимирівнаЯсній, Олег ПетровичKonovalenko, I.Maruschak, P.Kozbur, H.Yasniy, O.http://elartu.tntu.edu.ua/handle/lib/391712022-12-05T15:56:33Z2022-11-10T00:00:00ZНазва: Вплив частоти вібрацій та якості освітлення на кількісні показники дефектів, виявлених на поверхні металопрокату з застосуванням глибоких нейронних мереж
Автори: Коноваленко, Ігор Володимирович; Марущак, Павло Орестович; Козбур, Галина Володимирівна; Ясній, Олег Петрович; Konovalenko, I.; Maruschak, P.; Kozbur, H.; Yasniy, O.
Короткий огляд (реферат): The system of technical diagnostics of technological defects in the surface of sheet metal-roll based on deep neuron networks was tested. The dependence of geometrical parameters in diagnosing technological defects was established in terms of the magnitude of illumination of the surface and the frequency of vibrations. It has been shown that the main contribution to the result of the recognition of lightness on the surface may be the value of illumination. Vibrations in the extended range of frequencies and amplitudes are less influenced on the values of identified geometrical parameters of defects2022-11-10T00:00:00ZДіагностування механізмів на основі аналізу вібраційних сигналівЮзефович, Р.Личак, О.Яворський, І.Стецько, І.Стецько, І.Yuzefovych, R.Lychak, O.Javorskyj, I.Stetsko, I.Stetsko, I.http://elartu.tntu.edu.ua/handle/lib/391632022-12-05T15:56:28Z2022-11-10T00:00:00ZНазва: Діагностування механізмів на основі аналізу вібраційних сигналів
Автори: Юзефович, Р.; Личак, О.; Яворський, І.; Стецько, І.; Стецько, І.; Yuzefovych, R.; Lychak, O.; Javorskyj, I.; Stetsko, I.; Stetsko, I.
Короткий огляд (реферат): It is shown that the acqusition and analysis of vibration signals is of a big importance in the modern diagnosis of mechanisms, structures and even practical human
activities. The development and implementation of vibration signal acqusition and processing tools is based on signal models and methods of their processing. The parameters of the
vibration signals, as well as the mechanism status indicators, make it possible to carry out effective diagnostics2022-11-10T00:00:00ZВизначення навантаженості контейнера типу хопер приперевезенні моремПанченко, С.Ватуля, Г.Ловська, А.Краснокутський, Є.Panchenko, S.Vatulia, G.Lovska, A.Krasnokutskyi, Ye.http://elartu.tntu.edu.ua/handle/lib/391672022-12-05T15:56:30Z2022-11-10T00:00:00ZНазва: Визначення навантаженості контейнера типу хопер приперевезенні морем
Автори: Панченко, С.; Ватуля, Г.; Ловська, А.; Краснокутський, Є.; Panchenko, S.; Vatulia, G.; Lovska, A.; Krasnokutskyi, Ye.
Короткий огляд (реферат): The efficiency of freight transportation can be improved by the use of hopper containers. If required they can be equipped with lift-off roofs, which makes it possible to transport the freight requiring protection from weather. The possibility to transport these containers by sea was studied through. The research conducted will promote the designing of containers with better technical and operational characteristics that will improve the efficiency of container transportation.2022-11-10T00:00:00ZМатематичне моделювання еволюційної пошкоджуваності матеріалівФедоров, В.Fedorov, V.http://elartu.tntu.edu.ua/handle/lib/391652022-12-05T15:56:29Z2022-11-10T00:00:00ZНазва: Математичне моделювання еволюційної пошкоджуваності матеріалів
Автори: Федоров, В.; Fedorov, V.
Короткий огляд (реферат): The problem of constructing the evolutionary damageability equation is conщsidered. It is proved that if the damageability function in the Kachanov model is factorized , then this model gives the same rupture moment as the Palmgren-Miner rule, which is at variance with experiments. To construct a non-factorized damageability function, a method based on its potential representation has been develoThe influence of chaotly arrangement steel fibers on the properties of reinforced concreteped.2022-11-10T00:00:00ZОптико-акустичний метод для виявлення внутрішніх дефектів у композитних структурахМуравський, Л.Куць, О.Гаськевич, Г.Muravsky, L.Kuts, O.Gaskevych, G.http://elartu.tntu.edu.ua/handle/lib/391662022-12-05T15:56:23Z2022-11-10T00:00:00ZНазва: Оптико-акустичний метод для виявлення внутрішніх дефектів у композитних структурах
Автори: Муравський, Л.; Куць, О.; Гаськевич, Г.; Muravsky, L.; Kuts, O.; Gaskevych, G.
Короткий огляд (реферат): An optical-acoustic method for detecting internal defects in laminated composite structures is considered. In this method, the detection of such defects is performed by
producing an optical response from a thin layer of material located directly above the defect.
To implement the method, a hybrid optical-digital system with ultrasonic excitation of composite panels in the frequency sweep mode was created. Results of artificial and real
defects detection are shown.2022-11-10T00:00:00ZОбробка вібраційних сигналів методами періодичних нестаціонарних випадкових процесів для виявлення дефектів підшипниківЯворський, І.Юзефович, Р.Личак, О.Трохим, Г.Мацько, І.Javorskyj, I.Yuzefovych, R.Lychak, O.Trokhym, G.Matsko, I.http://elartu.tntu.edu.ua/handle/lib/391622022-12-05T15:56:27Z2022-11-10T00:00:00ZНазва: Обробка вібраційних сигналів методами періодичних нестаціонарних випадкових процесів для виявлення дефектів підшипників
Автори: Яворський, І.; Юзефович, Р.; Личак, О.; Трохим, Г.; Мацько, І.; Javorskyj, I.; Yuzefovych, R.; Lychak, O.; Trokhym, G.; Matsko, I.
Короткий огляд (реферат): The dependence of the spectral composition of deterministic periodic oscillations and the correlation-spectral structure of the stochastic component in vibration signal on theexisting shocks in the bearing was analyzed. Defects that occur in bearings during operation
cause non-linear effects in the part's response to load and non-linear effects in vibrations.
Obtained results can be used for early detection of mechanism defects and establishment of
their types2022-11-10T00:00:00ZМодель стохастичної модуляції вібраційних сигналів для виявлення дефектів підшипниківТрохим, Г.Личак, О.Юзефович, Р.Яворський, І.Слєпко, Р.Trokhym, G.Lychak, O.Yuzefovych, R.Javorskyj, I.Slyepko, R.http://elartu.tntu.edu.ua/handle/lib/391642022-12-05T15:56:29Z2022-11-10T00:00:00ZНазва: Модель стохастичної модуляції вібраційних сигналів для виявлення дефектів підшипників
Автори: Трохим, Г.; Личак, О.; Юзефович, Р.; Яворський, І.; Слєпко, Р.; Trokhym, G.; Lychak, O.; Yuzefovych, R.; Javorskyj, I.; Slyepko, R.
Короткий огляд (реферат): When studying the amplitude and phase spectra of the deterministic component of vibration signals and their relations with the defects of the investigated mechanisms, the
frequency distribution of the modulation features of the defects was observed. The expediency of dividing the frequency range of the signal for the used modulation models of
stochastic vibroacoustic oscillations was analyzed2022-11-10T00:00:00ZФрактографічне діагностування корозійних пошкоджень трубної сталі з корозійно-активними неметалевими включеннямиВинар, В.Чучман, М.Івашків, В.Василів, Х.Vynar, V.Chuchman, M.Ivashkiv, V.Vasyliv, Ch.http://elartu.tntu.edu.ua/handle/lib/391592022-12-05T15:56:24Z2022-11-10T00:00:00ZНазва: Фрактографічне діагностування корозійних пошкоджень трубної сталі з корозійно-активними неметалевими включеннями
Автори: Винар, В.; Чучман, М.; Івашків, В.; Василів, Х.; Vynar, V.; Chuchman, M.; Ivashkiv, V.; Vasyliv, Ch.
Короткий огляд (реферат): Fractographic diagnostic of pipe steel 20 corrosion damage have been made.
Corrosion-active non-metallic inclusions of the second type are the main cause of corrosion in the environment of model brine water. The accumulation of inclusions with a size of 10...200 μm in steel intensifies the development of local corrosion and the formation of through holes, which leads to a decrease in the service life of pipelines2022-11-10T00:00:00ZМатематичне моделювання фільтраційної корозійної тривкості на стадії формування структури бетонуЛучко, Йосип ЙосиповичГембара, Т.Luchko, J.Hembara, T.http://elartu.tntu.edu.ua/handle/lib/391602022-12-05T15:56:25Z2022-11-10T00:00:00ZНазва: Математичне моделювання фільтраційної корозійної тривкості на стадії формування структури бетону
Автори: Лучко, Йосип Йосипович; Гембара, Т.; Luchko, J.; Hembara, T.
Короткий огляд (реферат): The problem of the durability of concrete and reinforced concrete structures during corrosion of concrete due to the filtration of aqueous solutions is considered. The main values that determine the state of the liquid in concrete, such as density, pressure, filtration speed and the ratio of the total volume of channels or pores located in a certain volume, are considered. emi of a porous medium, to the entire volume of this medium2022-11-10T00:00:00ZВдосконалення бортової системи керування і контролю для багатокласової діагностики авіаційного газотурбінного двигунаПаздрій, О.Бурау, Н.Pazdrii, O. Ya.Bouraou, N. I.http://elartu.tntu.edu.ua/handle/lib/391612022-12-05T15:56:26Z2022-11-10T00:00:00ZНазва: Вдосконалення бортової системи керування і контролю для багатокласової діагностики авіаційного газотурбінного двигуна
Автори: Паздрій, О.; Бурау, Н.; Pazdrii, O. Ya.; Bouraou, N. I.
Короткий огляд (реферат): The work is devoted to the improvement of the on-board system of control of the aviation gas turbine engine by including a subsystem of multi-class diagnostics. Methodical,
algorithmic and software was developed for the implementation of software components for subsystem of multi-class diagnostics. The defined methods of analysis of diagnostic
information make it possible to determine features that reflect the initial processes of the development damages of various classes2022-11-10T00:00:00ZThe concept of improvement high-strength aluminum alloys fsw joint properties via post-weld explosive treatmentKosturek, R.http://elartu.tntu.edu.ua/handle/lib/391572023-01-10T07:13:47Z2022-11-10T00:00:00ZНазва: The concept of improvement high-strength aluminum alloys fsw joint properties via post-weld explosive treatment
Автори: Kosturek, R.
Короткий огляд (реферат): Although FSW allows to effective join high-strength aluminum alloys, the heat generated during the process causes undesirable changes in the strengthening phase, giving a joint efficiency of about 80%. The potential solution that can limit this problem is post-weld explosive treatment. The main idea is to affect the welded joint by a shock wave generated during the detonation of explosive material, which will increase the hardness of the HAZ.2022-11-10T00:00:00ZВплив способів дугового наплавлення на формування шарів та структуру наплавленого металу при адитивному синтезі виробів зі сталей та сплавівКоржик, В.Квасницький, В.Гринюк, А.Перепічай, А.Іляшенко, Є.Лагодзінський, І.Пелешенко, С.Буріка, В.Korzhyk, V.Kvasnytskyi, V.Grynyuk, A.Perepichay, A.Illiashenko, Y.Lahodzinskyi, I.Peleshenko, S.Burika, V.http://elartu.tntu.edu.ua/handle/lib/391582022-12-05T15:56:24Z2022-11-10T00:00:00ZНазва: Вплив способів дугового наплавлення на формування шарів та структуру наплавленого металу при адитивному синтезі виробів зі сталей та сплавів
Автори: Коржик, В.; Квасницький, В.; Гринюк, А.; Перепічай, А.; Іляшенко, Є.; Лагодзінський, І.; Пелешенко, С.; Буріка, В.; Korzhyk, V.; Kvasnytskyi, V.; Grynyuk, A.; Perepichay, A.; Illiashenko, Y.; Lahodzinskyi, I.; Peleshenko, S.; Burika, V.
Короткий огляд (реферат): The results of studies on the influence of methods and conditions of layer-by-layer cladding with a fusible electrode in a protective gas environment on the geometric
characteristics and structure of the metal in the additive synthesis of spatial products from ferrous and non-ferrous metals are considered. On the basis of metallographic studies and computer simulation results, the influence of surfacing methods on the tendency to crack formation during surfacing of copper-based alloys was established2022-11-10T00:00:00ZОптимізація геометрії шпоночного пазу вала екструдераЛяшук, Олег ЛеонтійовичГевко, Іван БогдановичПиндус, Юрій ІвановичТретьяков, О.Лах, О.Lyashyk, O.Gevko, I.Pyndus, Yu.Tretyakov, O.Lah, O.http://elartu.tntu.edu.ua/handle/lib/391542022-12-05T15:56:19Z2022-11-10T00:00:00ZНазва: Оптимізація геометрії шпоночного пазу вала екструдера
Автори: Ляшук, Олег Леонтійович; Гевко, Іван Богданович; Пиндус, Юрій Іванович; Третьяков, О.; Лах, О.; Lyashyk, O.; Gevko, I.; Pyndus, Yu.; Tretyakov, O.; Lah, O.
Короткий огляд (реферат): The work is devoted to increasing of the durability of technological equipment elements, forecasting of the resource and diagnostics of failures of the technical system. The basic regularities are analyzed and causes of the failure of the extruder’s working body shaft are determined. For torque values M = 40.74 - 64.37 N·m and of the extruder’s working body shaft, the stress-strain state of the contact surfaces of the keyhole of the extruder’s shaft is calculated by the method of three-dimensional finite element modelling.2022-11-10T00:00:00ZСтруктурно-енергетичний підхід в керуванні поверхневою міцністю матеріалів при тертіЯрема, Ігор ТеодоровичЛещук, Роман ЯрославовичГупка, Андрій БогдановичБуховець, Валерій МиколайовичYarema, I.Leshchuk, R.Gypka, A.Bukhovets, V.http://elartu.tntu.edu.ua/handle/lib/391562022-12-05T15:56:21Z2022-11-10T00:00:00ZНазва: Структурно-енергетичний підхід в керуванні поверхневою міцністю матеріалів при терті
Автори: Ярема, Ігор Теодорович; Лещук, Роман Ярославович; Гупка, Андрій Богданович; Буховець, Валерій Миколайович; Yarema, I.; Leshchuk, R.; Gypka, A.; Bukhovets, V.
Короткий огляд (реферат): From the standpoint of the structural-energetic theory of friction and wear, general principles of managing the surface strength of materials during friction are proposed. The fundamental principles of tribology and the conditions for the formation of dissipative self-organizing secondary structures are considered. The role of the kinetic phase transition in the energy balance of processes in the zone of frictional contact is determined2022-11-10T00:00:00ZВизначення вогнезахисної ефективності теплоізоляційних сумішей на геоцементній основі для захисту металевих конструкцій від вогнюГузій, С.Курська, Т.Григоренко, Н.Покалюк, В.Кострикін, О.Петрова, О.Guzii, S.Kurska, T.Grygorenko, N.Pokaliuk, V.Kostyrkin, O.Petrova, O.http://elartu.tntu.edu.ua/handle/lib/391522022-12-05T15:56:17Z2022-11-10T00:00:00ZНазва: Визначення вогнезахисної ефективності теплоізоляційних сумішей на геоцементній основі для захисту металевих конструкцій від вогню
Автори: Гузій, С.; Курська, Т.; Григоренко, Н.; Покалюк, В.; Кострикін, О.; Петрова, О.; Guzii, S.; Kurska, T.; Grygorenko, N.; Pokaliuk, V.; Kostyrkin, O.; Petrova, O.
Короткий огляд (реферат): The paper presents the results of determining the fire-retardant efficiency of heatinsulating mixtures based on geocement to protect metal structures from fire. After fire tests, it was found that with a coating thickness of 25 mm, the metal surface of an I-beam is heated to a critical temperature of 500 °C in 113 minutes of testing, which ensures the fire resistance class of metal structures P90-P120 and group III of fire retardant efficiency2022-11-10T00:00:00ZМодифікування біополімерної матриці полівінілацетатомСавчук, П.Кашицький, В.Садова, О.Мазурок, В.Savchuk, P.Kashytskyi, V.Sadova, O.Mazurok, V.http://elartu.tntu.edu.ua/handle/lib/391532022-12-05T15:56:18Z2022-11-10T00:00:00ZНазва: Модифікування біополімерної матриці полівінілацетатом
Автори: Савчук, П.; Кашицький, В.; Садова, О.; Мазурок, В.; Savchuk, P.; Kashytskyi, V.; Sadova, O.; Mazurok, V.
Короткий огляд (реферат): The influence of the modifying additive of the gluten matrix on the mechanical characteristics of biocomposite materials investigated. Optimization of heat treatment regimes of biocomposite materials at the first and main stages of product formation carried out. The effectiveness of additional heat treatment of biocomposites determined2022-11-10T00:00:00ZМоделювання діаграми деформування алюмінієвого сплаву 6060-Т651 методами машинного навчанняЯсній, Олег ПетровичПастух, Олег АнатолійовичЦимбалюк, Любов ІванівнаЯцишин, В.Дідич, Ірина СтепанівнаYasniy, O.Pastukh, O.Tsymbaliuk, L.Yatsyshyn, V.Didych, I.http://elartu.tntu.edu.ua/handle/lib/391552023-02-16T10:15:39Z2022-11-10T00:00:00ZНазва: Моделювання діаграми деформування алюмінієвого сплаву 6060-Т651 методами машинного навчання
Автори: Ясній, Олег Петрович; Пастух, Олег Анатолійович; Цимбалюк, Любов Іванівна; Яцишин, В.; Дідич, Ірина Степанівна; Yasniy, O.; Pastukh, O.; Tsymbaliuk, L.; Yatsyshyn, V.; Didych, I.
Короткий огляд (реферат): There was predicted the stress strain diagram by machine learning methods. In this study there were applied the method of k-nearest neighbors and random forest method to
obtain the best model for predicting the stress strain diagram of 6061-T651 aluminum alloy at 6 various temperatures (20, 100, 150, 200, 250, 300ºС). The obtained results are in good
agreement with the experimental data2022-11-10T00:00:00ZВплив частоти навантаження на функціональні властивості псевдопружного СПФБиків, Н.Ясній, Володимир ПетровичЛапуста, Ю.Будз, В.Bykiv, N.Yasniy, V.Lapusta, Y.Budz, V.http://elartu.tntu.edu.ua/handle/lib/391512022-12-05T15:56:17Z2022-11-10T00:00:00ZНазва: Вплив частоти навантаження на функціональні властивості псевдопружного СПФ
Автори: Биків, Н.; Ясній, Володимир Петрович; Лапуста, Ю.; Будз, В.; Bykiv, N.; Yasniy, V.; Lapusta, Y.; Budz, V.
Короткий огляд (реферат): This article describes the study of the effect of frequency on the functional properties of a pseudoelastic SMA. A wire with a diameter of 1.5 mm and a length of 210 mm
was subjected to a tensile test at frequencies of 0.1 Hz and 10 Hz. The research was carried out under controlled stresses in the sample. The difference in frequency greatly affected the
functional properties of the SMA and durability2022-11-10T00:00:00ZUsing of 3d modeling for investigation of the structure of hardfacing materials developed with fcaw using of powder electrodes with reaction mixture FE-MO-B-CIvanov, O.PrysyazhnyukKramar, H.Marynenko, S.Koval, I.Huryk, O.http://elartu.tntu.edu.ua/handle/lib/391492022-12-05T15:56:15Z2022-11-10T00:00:00ZНазва: Using of 3d modeling for investigation of the structure of hardfacing materials developed with fcaw using of powder electrodes with reaction mixture FE-MO-B-C
Автори: Ivanov, O.; Prysyazhnyuk; Kramar, H.; Marynenko, S.; Koval, I.; Huryk, O.
Короткий огляд (реферат): The main aim of the research is to investigate the structure of the hardfacing based on the perspective tungsten-free Fe-Ti-Mo-B-C system deposited with flux-cored arc welding
FCAW. Investigation includes developing the methodology for the 3D modeling of the Fe(Mo, B)2 grain. Obtained result in the form of 3D model show that in the hardfacing based
on the Fe-Ti-Mo-B-C system main strengthening phase Fe(Mo, B)2 is formed around grains of TiC, which act as a modifier2022-11-10T00:00:00ZНові високоентропійні матеріали та технології їх наноструктуризаціїЛевенець, А.Тихоновський, М.Levenets, A.Tikhonovsky, M.http://elartu.tntu.edu.ua/handle/lib/391472022-12-05T15:56:13Z2022-11-10T00:00:00ZНазва: Нові високоентропійні матеріали та технології їх наноструктуризації
Автори: Левенець, А.; Тихоновський, М.; Levenets, A.; Tikhonovsky, M.
Короткий огляд (реферат): A new class of metallic materials, so-called “high-entropy alloys” (HEAs), was under review. Various definitions of these alloys are given, their main differences from the
conventional alloys are indicated. The dynamics of publications in recent years in variousdatabases indicates that there is an inexhaustible interest in these alloys. The unique set ofproperties makes these alloys suitable for any application (low temperature applications, aerosphere, nuclear power etc.)2022-11-10T00:00:00ZРозробка плазмотрону для гібридного плазмового зварювання плавким електродом з осьовою подачею електродного дротуКоржик, В.Квасницький, В.Гринюк, А.Бабіч, О.Сливінський, О.Пелешенко, С.Лагодзінський, І.Korzhyk, V.Kvasnytskyi, V.GrynyukBabychSlyvinskyy, O.Peleshenko, S.Lahodzinskyi, I.http://elartu.tntu.edu.ua/handle/lib/391502022-12-05T15:56:16Z2022-11-10T00:00:00ZНазва: Розробка плазмотрону для гібридного плазмового зварювання плавким електродом з осьовою подачею електродного дроту
Автори: Коржик, В.; Квасницький, В.; Гринюк, А.; Бабіч, О.; Сливінський, О.; Пелешенко, С.; Лагодзінський, І.; Korzhyk, V.; Kvasnytskyi, V.; Grynyuk; Babych; Slyvinskyy, O.; Peleshenko, S.; Lahodzinskyi, I.
Короткий огляд (реферат): The thesis discusses the development of specialized plasmatrons for hybrid plasmaarc welding with a melting electrode. The ways of technological solutions for the organization of filler wire feeding in combination with the use of a compressed arc of a non-consumable electrode are reviewed. The development of a new, serial plasmatron with coaxial feeding of the filler electrode for welding aluminum alloys is presented2022-11-10T00:00:00ZКонцепція інформаційного моделювання будівель - "ВІМ"Грицеляк, Р.Grytseliak, R.http://elartu.tntu.edu.ua/handle/lib/391462022-12-05T15:56:11Z2022-11-10T00:00:00ZНазва: Концепція інформаційного моделювання будівель - "ВІМ"
Автори: Грицеляк, Р.; Grytseliak, R.
Короткий огляд (реферат): BIM is an acronym for Building Information Modeling or Building Information Management. It is a highly collaborative process that allows architects, engineers, real estate developers, contractors, manufacturers, and other construction professionals to plan, design,
and construct a structure or building within one 3D model. It can also span into the operation and management of buildings using data that building or structure owners have access to2022-11-10T00:00:00ZМоделювання функціональних властивостей псевдопружних сплавів з пам’яттю форми методами машинного навчанняЯсній, Олег ПетровичЯсній, Володимир ПетровичМалишевська, О.Дідич, Ірина СтепанівнаYasniy, O.Yasniy, V.MalyshevskaDidych, I.http://elartu.tntu.edu.ua/handle/lib/391482022-12-05T15:56:14Z2022-11-10T00:00:00ZНазва: Моделювання функціональних властивостей псевдопружних сплавів з пам’яттю форми методами машинного навчання
Автори: Ясній, Олег Петрович; Ясній, Володимир Петрович; Малишевська, О.; Дідич, Ірина Степанівна; Yasniy, O.; Yasniy, V.; Malyshevska; Didych, I.
Короткий огляд (реферат): There were predicted the functional properties of pseudoelastic alloy by machine learning methods, namely, the dependence of the dissipated energy and the strain range of
NiTi alloy on the number of loading cycles. The obtained results are in good agreement with the experimental data. It was found that the random forests method gives the lowest
prediction error of 3,9% and 7% in the test set of Wd-N and Δε-N dependences, respectively.2022-11-10T00:00:00ZОбгрунтування способу підвищення вогнестійкості залізобетонних будівельних конструкцій торгівельного центруБарський, В.Бабій, Я.Barskii, V.Babii, Ya.http://elartu.tntu.edu.ua/handle/lib/391442022-12-05T15:56:12Z2022-11-10T00:00:00ZНазва: Обгрунтування способу підвищення вогнестійкості залізобетонних будівельних конструкцій торгівельного центру
Автори: Барський, В.; Бабій, Я.; Barskii, V.; Babii, Ya.
Короткий огляд (реферат): Reinforced concrete structures are widely used in buildings and structures of various purposes, including public ones. According to fire safety requirements, they need
effective fire protection. The paper analyzes the main methods of passive and constructive fire protection of load-bearing structures. Based on the operating conditions and the required fire resistance class, protection based on the usage of fire-resistant plaster was chosen2022-11-10T00:00:00ZЖаростійкість твердих сплавів на подвійній карбідній основіБодрова, Людмила ГордіївнаКрамар, Галина МихайлівнаМариненко, Сергій ЮрійовичКоваль, Ігор ВолодимировичМуль, Олена ВладленівнаКовальчук, Ярослав ОлексійовичПрокопів, М.Bodrova, L.Kramar, H.Marynenko, S.Koval, I.Mul, O.Kovalchuk, Ya.Prokopiv, M.http://elartu.tntu.edu.ua/handle/lib/391422022-12-05T15:56:09Z2022-11-10T00:00:00ZНазва: Жаростійкість твердих сплавів на подвійній карбідній основі
Автори: Бодрова, Людмила Гордіївна; Крамар, Галина Михайлівна; Мариненко, Сергій Юрійович; Коваль, Ігор Володимирович; Муль, Олена Владленівна; Ковальчук, Ярослав Олексійович; Прокопів, М.; Bodrova, L.; Kramar, H.; Marynenko, S.; Koval, I.; Mul, O.; Kovalchuk, Ya.; Prokopiv, M.
Короткий огляд (реферат): The relationship between the oxidation’ kinetics in air of hard alloys based on titanium and vanadium carbide with a nickel-chromium binder in the temperature range of
800–1100 ̊С and the structure, phase and chemical composition of the formed scale was established. The regularities of the oxidation process were determined by the weight method, the main kinetic characteristics were calculated2022-11-10T00:00:00ZМодифікування відновленого шару зношених деталей при наплавленніРибалко, І.Марков, О.Rybalko, I.Markov, O.http://elartu.tntu.edu.ua/handle/lib/391412022-12-05T15:56:07Z2022-11-10T00:00:00ZНазва: Модифікування відновленого шару зношених деталей при наплавленні
Автори: Рибалко, І.; Марков, О.; Rybalko, I.; Markov, O.
Короткий огляд (реферат): An energy-saving method of modification during electric arc surfacing has been developed, which allows introducing powder impurities into the melt and ensuring their
uniform solution2022-11-10T00:00:00ZСклад суміші для силіціювання та борування виробів із карбіду кремнію та дисиліциду молібденуКовбашин, Василь ІвановичБочар, І.Kovbashyn, VasiliyBochar, Igorhttp://elartu.tntu.edu.ua/handle/lib/391452022-12-05T15:56:12Z2022-11-10T00:00:00ZНазва: Склад суміші для силіціювання та борування виробів із карбіду кремнію та дисиліциду молібдену
Автори: Ковбашин, Василь Іванович; Бочар, І.; Kovbashyn, Vasiliy; Bochar, Igor
Короткий огляд (реферат): The basic composition of a mixture for the treatment of ceramic materials based on reactive sintered silicon carbide and molybdenum disilicide is described. The technological and technological conditions of treatment of non-metallic ceramic materials depending on the composition of the silicidal and boride powder mixture were investigated and analyzed. It has been found that it is possible to increase the performance characteristics of powder mixtures for siliconization and boring by using a complex activator2022-11-10T00:00:00ZСтворення складних конструкцій методом 3д моделювання із застосуванням 3д друку в умовах діючого підприємстваЗаїка, О.Рудь, В.Самчук, Л.Zaika, O.Rud, V.Samchuk, L.http://elartu.tntu.edu.ua/handle/lib/391432022-12-05T15:56:10Z2022-11-10T00:00:00ZНазва: Створення складних конструкцій методом 3д моделювання із застосуванням 3д друку в умовах діючого підприємства
Автори: Заїка, О.; Рудь, В.; Самчук, Л.; Zaika, O.; Rud, V.; Samchuk, L.
Короткий огляд (реферат): And in our time, there are still companies that are not ready to introduce 3D printing into production processes. They use traditional technologies for obtaining parts and complex structures when it is necessary to replace the malfunctioning elements of production equipment. Using the example of an operating enterprise, it is shown that the use of 3D printing technology allows saving money and time for the production of necessary parts and spare parts2022-11-10T00:00:00ZВаріантне проектування висотних будівельЙолтухівський, С.Гудь, Михайло ІвановичYoltuhivskii, S.Hud, M.http://elartu.tntu.edu.ua/handle/lib/391372022-12-05T15:55:56Z2022-11-10T00:00:00ZНазва: Варіантне проектування висотних будівель
Автори: Йолтухівський, С.; Гудь, Михайло Іванович; Yoltuhivskii, S.; Hud, M.
Короткий огляд (реферат): On the basis of variant design with minimal linear movements and internal efforts, the optimal structural solution of the multi-story office center was selected. The designed building includes a core of rigidity, columns of heavy concrete behind a trapezoidal corrugated board and three outriggers. The simulation of the schemes was carried out in PC
LIRA 10.12 showed that the calculation scheme was chosen correctly2022-11-10T00:00:00ZВплив хаотично розміщених сталевих волокон на властивості залізобетонуГудь, Михайло ІвановичЛановик, М.Hud, M.Lanovyk, M.http://elartu.tntu.edu.ua/handle/lib/391352022-12-05T15:55:58Z2022-11-10T00:00:00ZНазва: Вплив хаотично розміщених сталевих волокон на властивості залізобетону
Автори: Гудь, Михайло Іванович; Лановик, М.; Hud, M.; Lanovyk, M.
Короткий огляд (реферат): Fibers are effective in reducing plastic and shrinkage cracking. Steel in the form of short discrete fibers are added to concrete such that they are uniformly distributed and randomly oriented. Steel fibers do not significantly alter free shrinkage of concrete, but at high enough dosages they can increase the resistance to cracking and can reduce the crack widths. Fibre composites possess increased extensibility and tensilestrength.2022-11-10T00:00:00ZМоделювання роботи каркасу будівлі складної геометричної форми при сукупній дії експлуатаційних навантаженьКедик, Т.Гудь, Михайло ІвановичKedyk, T.Hud, M.http://elartu.tntu.edu.ua/handle/lib/391392022-12-05T15:56:00Z2022-11-10T00:00:00ZНазва: Моделювання роботи каркасу будівлі складної геометричної форми при сукупній дії експлуатаційних навантажень
Автори: Кедик, Т.; Гудь, Михайло Іванович; Kedyk, T.; Hud, M.
Короткий огляд (реферат): As a result of the development of the project, it was decided to make the supporting frame of the designed house from metal structures, in contrast to the traditional frame from reinforced concrete. The expediency of choosing metal structures increases proportionally to the height of the building: the higher the building, the more obvious the advantages: speed of construction, higher quality - factory-made elements are used; freedom and variability of architectural plans, lower weight of structures2022-11-10T00:00:00ZФактори, що впливають на використання 3D-друку в будівництвіГудь, Михайло ІвановичЄсін, С.Hud, M.Yesin, S.http://elartu.tntu.edu.ua/handle/lib/391362022-12-05T15:56:04Z2022-11-10T00:00:00ZНазва: Фактори, що впливають на використання 3D-друку в будівництві
Автори: Гудь, Михайло Іванович; Єсін, С.; Hud, M.; Yesin, S.
Короткий огляд (реферат): The use of 3D printing technology offers several advantages over the traditional methods. However, additional challenges and risks are faced due to the introduction of this new technology in construction projects. A literature review was performed to identify the benefits of 3D printing. Five key benefits were identified: faster construction, cost reduction, more geometric freedom, sustainability and safety benefits.2022-11-10T00:00:00ZТеоретичні та експериментальні дослідження залишкових напружень, деформацій та переміщень при індукційному наплавленні тонких елементів конструкційПулька, Чеслав ВікторовичМихайлишин, Михайло СтаховичСенчишин, В.Прохоренко, О.Сенчишин, Віт.Pulka, Ch.Mykhailyshyn, M.Senchyshyn, V.Prokhorenko, O.Senchyshyn, Vit.http://elartu.tntu.edu.ua/handle/lib/391382022-12-05T15:56:06Z2022-11-10T00:00:00ZНазва: Теоретичні та експериментальні дослідження залишкових напружень, деформацій та переміщень при індукційному наплавленні тонких елементів конструкцій
Автори: Пулька, Чеслав Вікторович; Михайлишин, Михайло Стахович; Сенчишин, В.; Прохоренко, О.; Сенчишин, Віт.; Pulka, Ch.; Mykhailyshyn, M.; Senchyshyn, V.; Prokhorenko, O.; Senchyshyn, Vit.
Короткий огляд (реферат): The paper proposes a mathematical model for determining the fields of residual stresses, deformations and displacements that occur in the process of induction cladding,
taking into account the fact that the product of the modulus of elasticity and the coefficient of thermal expansion of base metal and deposited metal is-Simplified calculation formulas were obtained and corresponding algorithms were built, which allow determining residual stresses and displacements. Based on this, it is necessary to use lowgradient temperature fields, which allow to avoid the operation of preheating or tempering.2022-11-10T00:00:00ZДослідження економічної ефективності влаштування міжповерхового перекриття висотних будівельАбаче, В.Френдій, В.Вівчар, П.Мельник, Л.Abache, Victor EshiomatFrendiy, V.Vivchar, P.Melnyk, L.http://elartu.tntu.edu.ua/handle/lib/391402022-12-05T15:56:08Z2022-11-10T00:00:00ZНазва: Дослідження економічної ефективності влаштування міжповерхового перекриття висотних будівель
Автори: Абаче, В.; Френдій, В.; Вівчар, П.; Мельник, Л.; Abache, Victor Eshiomat; Frendiy, V.; Vivchar, P.; Melnyk, L.2022-11-10T00:00:00ZВплив швидкості приросту тиску газу при вакуумно-компресійному спіканні на структуру і властивості твердого сплаву ВК6МПрокопів, М.Харченко, О.Крамар, Галина МихайлівнаБодрова, Л.Ущаповський, Ю.Кисла, Г.Prokopiv, M. M.Kharchenko, O. V.Kramar, H. M.Bodrova, L. G.Ushchapovskii, Yu. P.Kysla, H. P.http://elartu.tntu.edu.ua/handle/lib/391322022-12-05T15:55:59Z2022-11-10T00:00:00ZНазва: Вплив швидкості приросту тиску газу при вакуумно-компресійному спіканні на структуру і властивості твердого сплаву ВК6М
Автори: Прокопів, М.; Харченко, О.; Крамар, Галина Михайлівна; Бодрова, Л.; Ущаповський, Ю.; Кисла, Г.; Prokopiv, M. M.; Kharchenko, O. V.; Kramar, H. M.; Bodrova, L. G.; Ushchapovskii, Yu. P.; Kysla, H. P.
Короткий огляд (реферат): The effect of 0.08, 0.2, and 0.5 MPa/min gas pressure increase rates up to 5.0 MPa during vacuum-compression sintering on the structure and properties of fine grain WC-6Co hard alloy was studied. A positive effect of the gas pressure increase rate increase on the transverse rupture strength and service stability during turning of Steel SAE 1045 due to thereduction of residual microporosity and the intensity of gas desorption was determined2022-11-10T00:00:00ZЕлектродугове наплавлення порошковою електродною стрічкою з імпульсною подачеюЛебедєв, В.Lebedev, V.http://elartu.tntu.edu.ua/handle/lib/391302022-12-05T15:56:02Z2022-11-10T00:00:00ZНазва: Електродугове наплавлення порошковою електродною стрічкою з імпульсною подачею
Автори: Лебедєв, В.; Lebedev, V.
Короткий огляд (реферат): In the modern conditions of operation of machines and mechanisms, it is of great importance not only to ensure their certain mechanical characteristics during welding and
surfacing to restore surface strengthening, but also to ensure minimum consumption of active materials and electricity at high performance indicators. In a number of cases, this can ensure the use of electrode powder tape processes. A new mechanism for feeding the tape in pulse mode has been developed; in the experiments, some features of electric arc welding with thepulse character of the motion of the tape electrode have been determined2022-11-10T00:00:00ZОцінка зміни віброміцності лопаток потужної парової турбіни після їхнього ремонтуШульженко, М.Ольховський, А.Shulzhenko, M.Olkhovsky, A.http://elartu.tntu.edu.ua/handle/lib/391342022-12-05T15:56:01Z2022-11-10T00:00:00ZНазва: Оцінка зміни віброміцності лопаток потужної парової турбіни після їхнього ремонту
Автори: Шульженко, М.; Ольховський, А.; Shulzhenko, M.; Olkhovsky, A.
Короткий огляд (реферат): The research is related to the need to assess the possibility of prolonging the trouble-free operation of turbine blades of the K-1000-60/3000 type. The change in the maximum stresses of the blades under the load from the steam flow with one damaged blade after repair is determined. Three-dimensional finite-element models of components and the
corresponding mathematical support for the calculation of stationary harmonic oscillations are used2022-11-10T00:00:00ZМоделі гістерезисної поведінки матеріалів із пам’яттю формиЯсній, Олег ПетровичЯсній, Володимир ПетровичСулим, Георгій ТеодоровичПастернак, Ярослав МихайловичДемчик, В.Yasniy, O.Iasnii, V.Sulym, H.Pasternak, Y.Demchyk, V.http://elartu.tntu.edu.ua/handle/lib/391332022-12-05T15:56:08Z2022-11-10T00:00:00ZНазва: Моделі гістерезисної поведінки матеріалів із пам’яттю форми
Автори: Ясній, Олег Петрович; Ясній, Володимир Петрович; Сулим, Георгій Теодорович; Пастернак, Ярослав Михайлович; Демчик, В.; Yasniy, O.; Iasnii, V.; Sulym, H.; Pasternak, Y.; Demchyk, V.
Короткий огляд (реферат): Shape memory alloys (SMA) are metallic alloys that can retain their initial form by memorising it between two transformation phases. Whilst loading such materials, the
hysteresis loops are observed. There was proposed the model to describe the hysteresis loops of SMA wires, based on experimental stress strain diagram. The proposed model uses the
least squares method. The applied approach shows good agreement with the empirical data2022-11-10T00:00:00ZТестування розрахованого каскаду мостового випрямляча в системі MICROCAP-8Яворська, Мирослава ІванівнаДубиняк, Тарас СтепановичНевожай, В.Пошивак, М.Yavorska, M.Dubyniak, T.Nevogay, V.Poshyvak, M.http://elartu.tntu.edu.ua/handle/lib/391312022-12-05T15:56:05Z2022-11-10T00:00:00ZНазва: Тестування розрахованого каскаду мостового випрямляча в системі MICROCAP-8
Автори: Яворська, Мирослава Іванівна; Дубиняк, Тарас Степанович; Невожай, В.; Пошивак, М.; Yavorska, M.; Dubyniak, T.; Nevogay, V.; Poshyvak, M.2022-11-10T00:00:00ZМеханізоване зварювання тонколистових алюмінієвих сплавів з використанням сучасної розробки механізму подачіЛебедєв, В.Lebedev, V.http://elartu.tntu.edu.ua/handle/lib/391272022-12-05T15:55:57Z2022-11-10T00:00:00ZНазва: Механізоване зварювання тонколистових алюмінієвих сплавів з використанням сучасної розробки механізму подачі
Автори: Лебедєв, В.; Lebedev, V.
Короткий огляд (реферат): The article deals with the problem of obtaining a quality welded joint of metal structures from aluminum alloys using semiautomatic equipment. Preliminary analysis of two
methods of welding MIG and TIG with the selection of the most effective of them. It is shown that the process with controllable impulse feed of the electrode wire is much more productive than the TIG process. It is proposed to apply a new process with a dosed supply of electrode wire, which provides mechanized welding without burns and significant buckling of
structures2022-11-10T00:00:00ZЕлектродугове механізоване зварювання в положеннях відмінних від нижньогоЛебедєв, В.Lebedev, V.http://elartu.tntu.edu.ua/handle/lib/391292022-12-05T15:56:22Z2022-11-10T00:00:00ZНазва: Електродугове механізоване зварювання в положеннях відмінних від нижнього
Автори: Лебедєв, В.; Lebedev, V.
Короткий огляд (реферат): In the material, the need to improve the results of welding and welding in the positions of the lower windings is indicated, and when there are problems with the shaping of
the seams. It is shown that the electric arc process with varying pulsed modes of spraying allows for a complete molding of seams. Reinforced, molding of seams and welded balls
with a used new system of dosed supply, which is effective for solving the tasks of yoke molding of seams2022-11-10T00:00:00ZЕфекти використання модульованих режимів роботи обладнання для дугового механізованого зварювання та наплавленняЛебедєв, В.Lebedev, V.http://elartu.tntu.edu.ua/handle/lib/391252022-12-05T15:55:58Z2022-11-10T00:00:00ZНазва: Ефекти використання модульованих режимів роботи обладнання для дугового механізованого зварювання та наплавлення
Автори: Лебедєв, В.; Lebedev, V.
Короткий огляд (реферат): Different variants of systems that provide modulation of process parameters of electric arc mechanized and automatic welding and surfacing are considered. It is suggested that the adjustable influence of any system of welding and surfacing equipment and some auxiliary systems on the process be attributed to general systems modulated influences.
Examples of effective use of modulated effects are given2022-11-10T00:00:00ZСуміщення процесів та комбіновані рішення при вдосконаленні техніки і технології дугового зварювання та наплавленняЛебедєв, В.Бриков, М.Макаренко, Н.Lebedev, V.Brykov, M.Makarenko, N.http://elartu.tntu.edu.ua/handle/lib/391282022-12-05T15:56:02Z2022-11-10T00:00:00ZНазва: Суміщення процесів та комбіновані рішення при вдосконаленні техніки і технології дугового зварювання та наплавлення
Автори: Лебедєв, В.; Бриков, М.; Макаренко, Н.; Lebedev, V.; Brykov, M.; Makarenko, N.
Короткий огляд (реферат): In work systematized and considered on the row of examples basic types of combinations of influences and combination of processes which are developed for the use in
the arc welding and naplavke a fluxible electrode.
It is shown that new technical and technological effects at welding and naplavke can be got only at purposeful introduction to the technological process of additional influences2022-11-10T00:00:00ZАналіз впливу низькочастотних коливань зварювальної ванни на частоту перенесення електродного металлуЛебедєв, В.Новиков, С.Lebedev, V.Novykov, S.http://elartu.tntu.edu.ua/handle/lib/391242022-12-05T15:55:54Z2022-11-10T00:00:00ZНазва: Аналіз впливу низькочастотних коливань зварювальної ванни на частоту перенесення електродного металлу
Автори: Лебедєв, В.; Новиков, С.; Lebedev, V.; Novykov, S.
Короткий огляд (реферат): The goal is to determine the influence of welding pool oscillations on the transfer of electrode metal, the dependence of the arc burning period on the oscillation parameters was obtained and investigated, which was carried out on the basis of oscillograms, which were obtained on different amplitude-frequency parameters and one technological mode of surfacing by GMAW: welding current I = 125 A., arc voltage U = 24 ÷ 26 V, surfacing speed V = 14 m/h2022-11-10T00:00:00ZНапрямки вдосконалення обладнання для плазмового напиленняЛебедєв, В.Лой, С.Єрмолаєв, Г.Lebedev, V.Loi, S. A.Ermolaev, G.http://elartu.tntu.edu.ua/handle/lib/391262022-12-05T15:56:04Z2022-11-10T00:00:00ZНазва: Напрямки вдосконалення обладнання для плазмового напилення
Автори: Лебедєв, В.; Лой, С.; Єрмолаєв, Г.; Lebedev, V.; Loi, S. A.; Ermolaev, G.
Короткий огляд (реферат): Some technical and technological problems of plasma spraying equipment operation are considered. Attention is paid to the most important components. New more effective designs of plasma torch, powder dosing systems, powder compositions for spraying with new qualities are proposed. Methods for determining the results of spraying, in particular, the stress state of the coating, etc2022-11-10T00:00:00ZДослідження теплових потоків, що діють на металеві конструкції транспортних мостівКовальчук, В.Лучко, Йосип ЙосиповичKovalchuk, V.Luchko, J.http://elartu.tntu.edu.ua/handle/lib/391232022-12-05T15:55:53Z2022-11-10T00:00:00ZНазва: Дослідження теплових потоків, що діють на металеві конструкції транспортних мостів
Автори: Ковальчук, В.; Лучко, Йосип Йосипович; Kovalchuk, V.; Luchko, J.
Короткий огляд (реферат): Experimental measurements of the temperature distribution on the surfaces of metal sheets of transport structures under the influence of positive and negative ambient temperatures were carried out. The method of evaluation of heat flows acting on metal structures of transport facilities in the conditions of their operation is given.
It was established that the amount of heat flows absorbed by the metal corrugated structure of transport facilities depends on the geographical location of the facility, the period of the year and the time of day.2022-11-10T00:00:00ZRemaining life of TI-6AL-4V ELI HIP IMPLANT WITH A CRACKSedmak, A.Smoljanic, T.Milovanovic, A.http://elartu.tntu.edu.ua/handle/lib/391222022-12-05T15:55:53Z2022-11-10T00:00:00ZНазва: Remaining life of TI-6AL-4V ELI HIP IMPLANT WITH A CRACK
Автори: Sedmak, A.; Smoljanic, T.; Milovanovic, A.
Короткий огляд (реферат): Fatigue failure is the main issue in design of hip implants. One way to prolong fatigue life is to use newly developed Ti6Al4V Extra Low Interstitials (ELI) alloy. As the most critical part, hip neck has been in the focus of this analysis, keeping in mind that the lower the thickness is, the higher the movement of joint may be, but reducing remaining life of implants with a crack at the same time. In this research extended Finite Element Method (xFEM) is used to analyse this effect2022-11-10T00:00:00ZВплив структурної неоднорідності матеріалу осей колісних пар локомотивів на мікромеханізми росту втомних тріщинСорочак, Андрій ПетровичSorochak, A.http://elartu.tntu.edu.ua/handle/lib/391212022-12-05T15:55:52Z2022-11-10T00:00:00ZНазва: Вплив структурної неоднорідності матеріалу осей колісних пар локомотивів на мікромеханізми росту втомних тріщин
Автори: Сорочак, Андрій Петрович; Sorochak, A.
Короткий огляд (реферат): To assess the residual resource of the axles of wheel pairs of railway transport and predict their durability, it is necessary to take into account the features of the structural inhomogeneity of the material. The reason for the inhomogeneity in the material of wheel pair axles is their manufacturing technology. The regularities of fatigue crack propagation in the axle material of a wheel pair are summarized2022-11-10T00:00:00ZМодель швидкості росту короткої втомної тріщиниГерасимчук, О.Кононученко, О.Herasymchuk, O.Kononuchenko, O.http://elartu.tntu.edu.ua/handle/lib/391202022-12-05T15:55:51Z2022-11-10T00:00:00ZНазва: Модель швидкості росту короткої втомної тріщини
Автори: Герасимчук, О.; Кононученко, О.; Herasymchuk, O.; Kononuchenko, O.
Короткий огляд (реферат): The proposed model allows to calculate the kinetic curves of short fatigue crack growth rate in structural elements with a blunt notch and to estimate the number of cycles from the moment of initiation of the crack to reach a certain size, using only the characteristics of monotonic strength and microstructure of the initial material2022-11-10T00:00:00ZПідвищення довговічності Zr-1%Nb дифузійним насиченням киснемТруш, В.Погрелюк, І.Лук’яненко, О.Кравчишин, Т.Trush, V.Pohrelyuk, I.Luk’yanenko, A.Kravchyshyn, T.http://elartu.tntu.edu.ua/handle/lib/391182022-12-05T15:55:50Z2022-11-10T00:00:00ZНазва: Підвищення довговічності Zr-1%Nb дифузійним насиченням киснем
Автори: Труш, В.; Погрелюк, І.; Лук’яненко, О.; Кравчишин, Т.; Trush, V.; Pohrelyuk, I.; Luk’yanenko, A.; Kravchyshyn, T.
Короткий огляд (реферат): During the operation of fuel element claddings, the tubes are subject to static loads.
Therefore, increasing the durability of such tubes under static load is important. The paper shows that diffusion treatment in an oxygen-containing gaseous medium provides an increase in the breaking stresses of rings cut from zirconium tubes of the Zr-1%Nb alloy. It was found that as a result of diffuse treatment, a modified surface layer enriched with oxygen is formed.
The test results correlated with fractographic studies.2022-11-10T00:00:00ZOn the relationship between microstructure, mechanical properties and hydrogen embrittlement of pipe steelsZvirko, O.Dzioba, I.Lipiec, S.TsyrulnykVenhryniuk, O.http://elartu.tntu.edu.ua/handle/lib/391192022-12-05T15:55:50Z2022-11-10T00:00:00ZНазва: On the relationship between microstructure, mechanical properties and hydrogen embrittlement of pipe steels
Автори: Zvirko, O.; Dzioba, I.; Lipiec, S.; Tsyrulnyk; Venhryniuk, O.
Короткий огляд (реферат): The medium carbon casing pipe steels for oil and gas wells with fine grain bainitic microstructure and with coarse microstructure of ferrite-pearlite were tested. The steel with higher strength and with more dispersed microstructure was less susceptible to hydrogen embrittlement than the another one. The finite element method of load simulation of the specimens with crack was used for assessment of the embrittlement of the studied steels2022-11-10T00:00:00ZЛокалізація напружень і втомне пошкодження зварної фермиКовальчук, Ярослав ОлексійовичШингера, Наталія ЯрославівнаШвед, Ярослав ЛеонідовичKovalchuk, Y.Shynhera, N.Shwed, Y.http://elartu.tntu.edu.ua/handle/lib/391172023-10-13T06:30:54Z2022-11-10T00:00:00ZНазва: Локалізація напружень і втомне пошкодження зварної ферми
Автори: Ковальчук, Ярослав Олексійович; Шингера, Наталія Ярославівна; Швед, Ярослав Леонідович; Kovalchuk, Y.; Shynhera, N.; Shwed, Y.
Короткий огляд (реферат): An experimental study of the physical model of a rectangular welded truss under the action of a cyclic load on the structure was performed. It was found that under such
conditions, the maximum stresses are formed in the upper part of the lower chord of the truss at the point where the brace of the K-shaped node is attached to it. As a result, a fatigue crack appears there, which spreads along the edge of the weld until the structure is completely destroyed2022-11-10T00:00:00ZЗародження тріщини і зміна границі витривалості у процесі втоми сталейЦибаньов, Георгій ВасильовичTsyban’ov, G.http://elartu.tntu.edu.ua/handle/lib/391152022-12-05T15:55:48Z2022-11-10T00:00:00ZНазва: Зародження тріщини і зміна границі витривалості у процесі втоми сталей
Автори: Цибаньов, Георгій Васильович; Tsyban’ov, G.
Короткий огляд (реферат): The previously proposed dependence for the calculated construction of the French line has been adjusted based on the new results. For this purpose a new model of the kinetics of the endurance limit in the process of cyclic loading of steels was developed and used. The obtained results show a satisfactory description of the experiments taken from literary sources. The possibility of using the performed development to determine fatigue damage is shown2022-11-10T00:00:00ZПрогнозування в’язкості руйнування корпусних реакторних сталей в області крихко-вязкого переходу на основі локальних моделей та врахування впливу двовісного навантаженняСидяченко, В.Котляренко, А.Sidyachenko, V.Kotliarenko, A.http://elartu.tntu.edu.ua/handle/lib/391162022-12-05T15:55:38Z2022-11-10T00:00:00ZНазва: Прогнозування в’язкості руйнування корпусних реакторних сталей в області крихко-вязкого переходу на основі локальних моделей та врахування впливу двовісного навантаження
Автори: Сидяченко, В.; Котляренко, А.; Sidyachenko, V.; Kotliarenko, A.
Короткий огляд (реферат): The Master curve for reactor pressure vessel steel 15Cr2NiMoFA-A was experimentally constructed. Fracture toughness estimation using the Rice-Tracey model showed satisfactory agreement with the Master curve. A small-sized cruciform specimen was developed, the effect of biaxial bending on the crack resistance of 15Cr2NiMoFA-A steel was
investigated, and a decrease in fracture toughness compared to uniaxial loading was shown2022-11-10T00:00:00ZМастильні композиції для підвищення зносостійкості сталевих пар тертяКосарчук, В.Чаусов, М.Марущак, Павло ОрестовичПилипенко, А.Твердомед, В.Kosarchuk, V.Chausov, M.Maruschak, P.Pylypenko, A.Tverdomed, V.http://elartu.tntu.edu.ua/handle/lib/391142022-12-05T15:55:47Z2022-11-10T00:00:00ZНазва: Мастильні композиції для підвищення зносостійкості сталевих пар тертя
Автори: Косарчук, В.; Чаусов, М.; Марущак, Павло Орестович; Пилипенко, А.; Твердомед, В.; Kosarchuk, V.; Chausov, M.; Maruschak, P.; Pylypenko, A.; Tverdomed, V.
Короткий огляд (реферат): The kinetics of wear, change in hardness and accumulation of damage in the surface layers of samples of K74 rail steel and structural steel 20 were determined and certain
correlations between these parameters was establish. A physical explanation of the effects of increasing the wear resistance of steel friction pairs due to the use of lubricating compositions with additives of metal nano powders was offered.2022-11-10T00:00:00ZAnalysis of electrically permeable cracks on the interface between two one-dimensional piezoelectric quasicrystalsLapusta, Yu.Chapelle, F.Sheveleva, A.Loboda, V.http://elartu.tntu.edu.ua/handle/lib/391132022-12-05T15:55:47Z2022-11-10T00:00:00ZНазва: Analysis of electrically permeable cracks on the interface between two one-dimensional piezoelectric quasicrystals
Автори: Lapusta, Yu.; Chapelle, F.; Sheveleva, A.; Loboda, V.
Короткий огляд (реферат): A set of finite number collinear cracks along the interface of two 1D piezoelectric hexagonal quasicrystals is considered. The cracks can have arbitrary lengths and distances
between their tips. The problem of linear relationship is formulated and solved in an analytical form. The analytical formula for the ERR have been obtained. The variations of the
phonon and phason crack faces displacement jumps, stresses along the interface and the ERR are presented in graph and table forms2022-11-10T00:00:00ZВплив високих температур на ударну в’язкість сталі 25Х1М1ФБаран, Денис ЯрославовичГудь, Михайло ІвановичШумейко, В.Hud, M.Baran, D.Shumeiko, V.http://elartu.tntu.edu.ua/handle/lib/391082023-02-14T08:09:00Z2022-11-10T00:00:00ZНазва: Вплив високих температур на ударну в’язкість сталі 25Х1М1Ф
Автори: Баран, Денис Ярославович; Гудь, Михайло Іванович; Шумейко, В.; Hud, M.; Baran, D.; Shumeiko, V.
Короткий огляд (реферат): Most of the durable structures of metallurgical equipment, in particular, the rollers of continuous casting machines, operate at elevated temperatures, which leads to
changes in the mechanical characteristics of the material and subsequently leads to the destruction and stoppage of metallurgical equipment. Determining the specifics of the course of these processes is an important issue of both the mechanics of destruction and the economy as a whole.2022-11-10T00:00:00ZРозробка підходів до оптимізації технологій зміцнення елементів конструкцій із концентраторами напружень методами інженерії поверхніЛучко, Йосип ЙосиповичКузін, О.Копилов, В.Кузін, М.Luchko, Y.Kuzin, O.Kopylov, V.Kuzin, M.http://elartu.tntu.edu.ua/handle/lib/391122022-12-05T15:55:46Z2022-11-10T00:00:00ZНазва: Розробка підходів до оптимізації технологій зміцнення елементів конструкцій із концентраторами напружень методами інженерії поверхні
Автори: Лучко, Йосип Йосипович; Кузін, О.; Копилов, В.; Кузін, М.; Luchko, Y.; Kuzin, O.; Kopylov, V.; Kuzin, M.
Короткий огляд (реферат): The problem of ensuring the required level of operational parameters of structures with the presence of stress concentrators is considered. The ways of controlling the contact strength by the formation of a given distribution of mechanical properties in the body are proposed. These approaches make it possible both to optimize the technologies of hardening
parts and determine the causes of their failure2022-11-10T00:00:00ZВизначення параметрів моделі деформування матеріалу джонсона-кука для тонколистового прокату високоміцної сталі ARMOX 500TКравчук, Р.Кравчук, А.Kravchuk, R.Kravchuk, A.http://elartu.tntu.edu.ua/handle/lib/391112022-12-05T15:55:45Z2022-11-10T00:00:00ZНазва: Визначення параметрів моделі деформування матеріалу джонсона-кука для тонколистового прокату високоміцної сталі ARMOX 500T
Автори: Кравчук, Р.; Кравчук, А.; Kravchuk, R.; Kravchuk, A.
Короткий огляд (реферат): The paper presents the results of complex experimental and computational studies of the behavior of thin-sheet high-strength steel ARMOX 500T under various types of load,which made it possible to determine the material parameters of the Johnson-Cook model2022-11-10T00:00:00ZВплив натягу дорнування на кінетику росту втомної тріщини за сталої амплітуди навантаженняДивдик, О.Ясній, Володимир ПетровичЛяшук, Олег ЛеонтійовичОкіпний, Ігор БогдановичКомар, Роман ВасильовичСокіл, П.Dyvdyk, O.Iasnii, V.Lyashuk, O.Okipnyi, I.Komar, R.Sokil, P.http://elartu.tntu.edu.ua/handle/lib/391092022-12-05T15:55:43Z2022-11-10T00:00:00ZНазва: Вплив натягу дорнування на кінетику росту втомної тріщини за сталої амплітуди навантаження
Автори: Дивдик, О.; Ясній, Володимир Петрович; Ляшук, Олег Леонтійович; Окіпний, Ігор Богданович; Комар, Роман Васильович; Сокіл, П.; Dyvdyk, O.; Iasnii, V.; Lyashuk, O.; Okipnyi, I.; Komar, R.; Sokil, P.
Короткий огляд (реферат): In the paper, the influence of cold expanded hole on the fatigue crack grown ofaluminum alloy D16chT was studied. There were revealed the main regularities of the fatigue crack growth rate of quarter elliptical crack in the vicinity of hole on SIF. There was obtained the dependence of the fatigue crack growth rate of an angular crack in aluminum alloy plates on the SIF range.2022-11-10T00:00:00ZПідбір раціональної схеми розміщення в’язей у днищі плаваючого басейнуГудь, Михайло ІвановичHud, M.http://elartu.tntu.edu.ua/handle/lib/391102022-12-05T15:55:44Z2022-11-10T00:00:00ZНазва: Підбір раціональної схеми розміщення в’язей у днищі плаваючого басейну
Автори: Гудь, Михайло Іванович; Hud, M.
Короткий огляд (реферат): Floating pools are a special type of structures that are only affected by the forces of their own weight during transportation and installation of such a structure. During operation, the pool is partially immersed in the reservoir and is in a state of constant equilibrium, since
the mass of water in the middle and the mass of the supporting structure of the pool bowl are completely compensated by the Archimedean force2022-11-10T00:00:00ZМоделювання взаємодії двох поверхневих півеліптичних компланарних тріщин довільних розмірів за одновісного розтягу пластини скінчених розмірівПідгурський, Микола ІвановичПідгурський, Іван МиколайовичСташків, Микола ЯрославовичРудяк, Ю.Pidgurskyi, M.Pidgurskyi, I.Stashkiv, M.Рудяк, Ю.http://elartu.tntu.edu.ua/handle/lib/391062022-12-05T15:55:32Z2022-11-10T00:00:00ZНазва: Моделювання взаємодії двох поверхневих півеліптичних компланарних тріщин довільних розмірів за одновісного розтягу пластини скінчених розмірів
Автори: Підгурський, Микола Іванович; Підгурський, Іван Миколайович; Сташків, Микола Ярославович; Рудяк, Ю.; Pidgurskyi, M.; Pidgurskyi, I.; Stashkiv, M.; Рудяк, Ю.
Короткий огляд (реферат): Definition of the stress intensity factors is one of the most important tasks for the estimation of residual life of structures. Precise computation of stress intensity factors accurately is of great importance in any linear elastic fracture mechanics problem. The analysis of available methods for determining stress intensity factors (SIF) for surface semielliptical cracks along their contour has been carried out and data on the mutual influence of several cracks on the change of SIF has been obtained2022-11-10T00:00:00ZДослідження міцності перфорованих балок з однорядним та дворядним розташуванням отворівПідгурський, Микола ІвановичСташків, Микола ЯрославовичПідгурський, Іван МиколайовичСенчишин, Віктор СтепановичПідлужний, О.Биків, Д.Слободян, В.Підвисоцький, О.Гоголюк, В.Pidgurskyi, M.Stashkiv, M.Pidgurskyi, I.Senchishin, V.Pidluzhnyi, O.Bykiv, D.Slobodian, V.Pidvysotskyi, O.Hoholiuk, V.http://elartu.tntu.edu.ua/handle/lib/391072022-12-05T15:55:41Z2022-11-10T00:00:00ZНазва: Дослідження міцності перфорованих балок з однорядним та дворядним розташуванням отворів
Автори: Підгурський, Микола Іванович; Сташків, Микола Ярославович; Підгурський, Іван Миколайович; Сенчишин, Віктор Степанович; Підлужний, О.; Биків, Д.; Слободян, В.; Підвисоцький, О.; Гоголюк, В.; Pidgurskyi, M.; Stashkiv, M.; Pidgurskyi, I.; Senchishin, V.; Pidluzhnyi, O.; Bykiv, D.; Slobodian, V.; Pidvysotskyi, O.; Hoholiuk, V.
Короткий огляд (реферат): Cellular beams with circular openings were modeled using the finite element method. The distribution of stresses in the perforation zones of the beam with round openings
for the single-row and double-row variants was obtained. A comparative analysis of these beams was carried out for perforated beams of almost the same weight. Recommendations for
increasing the durability of beams with perforations of various configurations are provided2022-11-10T00:00:00ZВимірювання твердос ті високоміцних легованих сталей із застосуванням стандарту СОУ 56-36-2021Середа, А.Каток, О.Харченко, В.Кравчук, Р.Рудницький, М.Швець, В.Бісик, С.Sereda, A.Katok, O.Kharchenko, V.Kravchuk, R.Rudnitskyi, M.Svets, V.Bisyk, S.http://elartu.tntu.edu.ua/handle/lib/391052022-12-05T15:55:40Z2022-11-10T00:00:00ZНазва: Вимірювання твердос ті високоміцних легованих сталей із застосуванням стандарту СОУ 56-36-2021
Автори: Середа, А.; Каток, О.; Харченко, В.; Кравчук, Р.; Рудницький, М.; Швець, В.; Бісик, С.; Sereda, A.; Katok, O.; Kharchenko, V.; Kravchuk, R.; Rudnitskyi, M.; Svets, V.; Bisyk, S.
Короткий огляд (реферат): A standard for measuring the Brinell hardness of sheet high-strength alloy steels is presented. The features of the presented technique are shown on the example of sheet steels 28GRA and 28ГХНМР2022-11-10T00:00:00ZОсобливості оцінювання деградації конструкційних сталей за дії циклічного навантаження та середовищНикифорчин, Г.Семенов, П.Цирульник, Олександр ТимофійовичЗвірко, О.Nykyforchyn, H.Semenov, P.Tsyrulnyk, O.Zvirko, O.http://elartu.tntu.edu.ua/handle/lib/391042022-12-05T15:55:26Z2022-11-10T00:00:00ZНазва: Особливості оцінювання деградації конструкційних сталей за дії циклічного навантаження та середовищ
Автори: Никифорчин, Г.; Семенов, П.; Цирульник, Олександр Тимофійович; Звірко, О.; Nykyforchyn, H.; Semenov, P.; Tsyrulnyk, O.; Zvirko, O.
Короткий огляд (реферат): Long-term operation of structural steels often intensifies their degradation, which manifests itself in a decrease in initial physical and mechanical properties. The work highlights the peculiarities of the steel degradation process and its assessment under conditions of cyclic loading, as well as under the action of corrosive hydrogenating environments. Special attention is paid to the role of in-bulk dissipated damage in the metal degradation2022-11-10T00:00:00ZОцінка міцності попередньо напруженої плити при її стисненні двома штампамиШелестовський, Борис ГригоровичГабрусєв, Григорій ВалерійовичГабрусєва, Ірина ЮріївнаShelestovskyi, B.Habrusiev, H.Habrusieva, I.http://elartu.tntu.edu.ua/handle/lib/391022022-12-05T15:55:27Z2022-11-10T00:00:00ZНазва: Оцінка міцності попередньо напруженої плити при її стисненні двома штампами
Автори: Шелестовський, Борис Григорович; Габрусєв, Григорій Валерійович; Габрусєва, Ірина Юріївна; Shelestovskyi, B.; Habrusiev, H.; Habrusieva, I.
Короткий огляд (реферат): The stress-strain state of a predeformed plate, which is modeled by a prestressed lаyer, is analyzed in the case of its smooth contact interaction with two rigid axisymmetric parabolic indenters. The influence of plate thickness and its initial strains on the magnitude and features of the contact stresses and vertical displacements on the surface of the plate is analyzed for the case of compressible and incompressible solids2022-11-10T00:00:00ZДослідження впливу компоновки стрижнів апарату зовнішньої фіксації на жорсткість системи fem аналізомМусієнко, О.Фам, Д.Моргун, О.Діденко, Р.Musiienko, O.Pham, D.Morhun, O.Didenko, R.http://elartu.tntu.edu.ua/handle/lib/391032022-12-05T15:55:39Z2022-11-10T00:00:00ZНазва: Дослідження впливу компоновки стрижнів апарату зовнішньої фіксації на жорсткість системи fem аналізом
Автори: Мусієнко, О.; Фам, Д.; Моргун, О.; Діденко, Р.; Musiienko, O.; Pham, D.; Morhun, O.; Didenko, R.
Короткий огляд (реферат): A CAD/CAE model of the system was created. In accordance with the created models, load simulation (compression, bending, torsion) of these systems was carried
out using the finite element method. According to the results of the FEM analysis, a comparison of the stiffness of the system with different layouts of the rods was made. It was established that the stiffness of the system has a correlation with the distance between the internal rods.2022-11-10T00:00:00ZДослідження міцності пористих проникних матеріалів методами комп’ютерного моделюванняПовстяной, О.Полінкевич, Р.Редько, Н.Povstianoi, O.Polinkevich, R.Redko, N.http://elartu.tntu.edu.ua/handle/lib/391012022-12-05T15:55:35Z2022-11-10T00:00:00ZНазва: Дослідження міцності пористих проникних матеріалів методами комп’ютерного моделювання
Автори: Повстяной, О.; Полінкевич, Р.; Редько, Н.; Povstianoi, O.; Polinkevich, R.; Redko, N.
Короткий огляд (реферат): The strength of porous permeable materials significantly affects the quality of the final product, and therefore, among the new methods of its determination, the use of computer modeling is important, which is based on the finite element method, and with which it is possible to predict the quality indicators of the final product and analyze the stress-strain
state under the influence of mechanical loads2022-11-10T00:00:00ZМетоди моделювання переривчастої повзучості сплаву АМг6Федак, Сергій ІгнатовичFedak, S.http://elartu.tntu.edu.ua/handle/lib/391002023-06-07T11:54:54Z2022-11-10T00:00:00ZНазва: Методи моделювання переривчастої повзучості сплаву АМг6
Автори: Федак, Сергій Ігнатович; Fedak, S.
Короткий огляд (реферат): The use of different methods for investigating the jump-like creep of the AMg6 aluminum alloy based on its preliminary plastic deformation during tensile test in the soft mode of loading are compared. It is more efficient to predict the magnitude of the jump during the creep by methods of machine learning, in particular, neural networks, which show the best results2022-11-10T00:00:00ZДо визначення критичних деформацій клеєної деревини хвойних порідГомон, Св.Гомон, С.Кулаковський, Л.Homon, S.Gomon, S.Kulakovskyi, L.http://elartu.tntu.edu.ua/handle/lib/390972022-12-05T15:55:28Z2022-11-10T00:00:00ZНазва: До визначення критичних деформацій клеєної деревини хвойних порід
Автори: Гомон, Св.; Гомон, С.; Кулаковський, Л.; Homon, S.; Gomon, S.; Kulakovskyi, L.
Короткий огляд (реферат): The methodology of experimental studies of glued coniferous wood with an average moisture content of 12% under a strict test regime is presented. Complete deformation diagrams of glued wood «σс-uc». were constructed. The values of critical deformations of glued larch, pine, and spruce wood were determined experimentally and theoretically2022-11-10T00:00:00ZДеформування та міцність композитних структур з тонкими стрічковими включеннямиКушнір, Р.Сулим, Георгій ТеодоровичПіскозуб, Й.Kushnir, R.Sulym, H.Piskozub, Y.http://elartu.tntu.edu.ua/handle/lib/390982022-12-05T15:55:39Z2022-11-10T00:00:00ZНазва: Деформування та міцність композитних структур з тонкими стрічковими включеннями
Автори: Кушнір, Р.; Сулим, Георгій Теодорович; Піскозуб, Й.; Kushnir, R.; Sulym, H.; Piskozub, Y.
Короткий огляд (реферат): Within the framework of the concept of deformable solid mechanics, an analytical numerical method to the problem of determining the mechanical fields in the composite structures with thin interphase ribbon-like deformable multilayered physically nonlinear inhomogeneities under combined force and dislocation loading has been proposed2022-11-10T00:00:00ZApplication of machine learning methods for predicting the mechanical behavior of dispersion-strengthened composite materialBabudzhan, R.Vodka, O.Shapovalova, M.http://elartu.tntu.edu.ua/handle/lib/390992022-12-05T15:55:32Z2022-11-10T00:00:00ZНазва: Application of machine learning methods for predicting the mechanical behavior of dispersion-strengthened composite material
Автори: Babudzhan, R.; Vodka, O.; Shapovalova, M.
Короткий огляд (реферат): The work is devoted for creating a model for approximating the solution by the finite element method of the problem of plane deformation of a dispersion-strengthened composite material. An algorithm for constructing a parametric 2-D composite model is proposed. The processing of the parameters of the microstructure material stress-strain state occurs using a convolutional neural network. A surrogate model is used for calculations speed
up and determine the overall approximations quality of such type mechanics problems2022-11-10T00:00:00ZАналіз роботи профільних виробів, армованих волокнами композитів у конструкціїІгнатьєва, Вікторія БорисівнаIhnatieva, V.http://elartu.tntu.edu.ua/handle/lib/390962024-02-08T10:42:26Z2022-11-10T00:00:00ZНазва: Аналіз роботи профільних виробів, армованих волокнами композитів у конструкції
Автори: Ігнатьєва, Вікторія Борисівна; Ihnatieva, V.
Короткий огляд (реферат): Analysis of the work of products made of composite materials of simple and complex cross-section in constructions under simple and complex loads is carried out. The existing methods of increasing mechanical characteristics of products from compositematerials are given. Negative consequences and disadvantages of application of existing methods of increasing mechanical characteristics of products from composite materials are formulated2022-11-10T00:00:00ZКорозійна тривкість поруватого титану в неогранічних кислотахПогрелюк, І.Лаврись, С.Pohrelyuk, I.Lavrys, S.http://elartu.tntu.edu.ua/handle/lib/390942022-12-05T15:55:31Z2022-11-10T00:00:00ZНазва: Корозійна тривкість поруватого титану в неогранічних кислотах
Автори: Погрелюк, І.; Лаврись, С.; Pohrelyuk, I.; Lavrys, S.
Короткий огляд (реферат): In this work, it was determined the relationship between synthesis parameters, microstructure, porosity, and corrosion resistance of titanium obtained by powder metallurgy.
It was shown that the corrosion resistance in hydrochloric acid is very sensitive to the residual porosity of titanium, where the corrosion rate decreases with the increase of the porosity.
However, the porosity has a lesser effect on the corrosion rate of titanium in sulfuric acid.
During long-term corrosion tests, the porosity doesn't effect the corrosion resistance of titanium.2022-11-10T00:00:00ZМоделювання роботи залізобетонного каркасу громадської будівлі при багатофакторному розрахункуСемчук, А.-А.Крамар, Галина МихайлівнаГудь, Михайло ІвановичSemchuk, A.-A.Kramar, H.Hud, M.http://elartu.tntu.edu.ua/handle/lib/390922023-02-14T08:09:07Z2022-11-10T00:00:00ZНазва: Моделювання роботи залізобетонного каркасу громадської будівлі при багатофакторному розрахунку
Автори: Семчук, А.-А.; Крамар, Галина Михайлівна; Гудь, Михайло Іванович; Semchuk, A.-A.; Kramar, H.; Hud, M.
Короткий огляд (реферат): Calculations of building frame elements: metal columns, rails, beams, connections, monolithic floors and walls were carried out in the SCAD Office software complex. The main forces arising in the frame from the action of operational loads under the most unfavorable combination are determined. Also, the movement of the frame of the building in the vertical and horizontal planes was calculated, and the cracking of the building under seismic forces
was determined2022-11-10T00:00:00ZМоделювання роботи пошкодженої залізобетонної колони з використання пк «ЛІРА»Лисий, І.Лиса, А.Крамар, Галина МихайлівнаГудь, Михайло ІвановичLysyi, I.Lysa, A.Kramar, H.Hud, M.http://elartu.tntu.edu.ua/handle/lib/390952023-02-14T08:09:14Z2022-11-10T00:00:00ZНазва: Моделювання роботи пошкодженої залізобетонної колони з використання пк «ЛІРА»
Автори: Лисий, І.; Лиса, А.; Крамар, Галина Михайлівна; Гудь, Михайло Іванович; Lysyi, I.; Lysa, A.; Kramar, H.; Hud, M.
Короткий огляд (реферат): To develop a project for the reconstruction of an industrial building, an examination of reinforced concrete columns was carried out and it was determined that they need strengthening. The static calculation of the damaged and undamaged column was carried out using the "Lira-SAPR 2016" software complex by skin elements method. Ways tostrengthen damaged columns are proposed2022-11-10T00:00:00ZВизначення і підбір міцнісних характеристик залізобетонної плитиПлисюк, В.Ганущак, Т.Plysiuk, V.Hanushchak, T.http://elartu.tntu.edu.ua/handle/lib/390932022-12-05T15:55:55Z2022-11-10T00:00:00ZНазва: Визначення і підбір міцнісних характеристик залізобетонної плити
Автори: Плисюк, В.; Ганущак, Т.; Plysiuk, V.; Hanushchak, T.
Короткий огляд (реферат): Modern constructions and buildings require the creation and carrying out of a complex calculation in the design process, in particular the study of the impact of loads and the selection of the necessary materials for bearing elements. In this study, the calculation of the reinforced concrete floor slab of a typical floor as part of a nine-story residential building is performed. As a result of the study, the distribution of the theoretical slab reinforcement was obtained2022-11-10T00:00:00ZДослідження роботи великопролітного просторовго арочного каркасу будівлі громадського призначенняКурач, С.Вознюк, Д.Сидоренко, Е.Ковальчук, Ярослав ОлексійовичKurach, S.Vozniuk, D.Sydorenko, E.Kovalchuk, Ya.http://elartu.tntu.edu.ua/handle/lib/390892022-12-05T15:55:30Z2022-11-10T00:00:00ZНазва: Дослідження роботи великопролітного просторовго арочного каркасу будівлі громадського призначення
Автори: Курач, С.; Вознюк, Д.; Сидоренко, Е.; Ковальчук, Ярослав Олексійович; Kurach, S.; Vozniuk, D.; Sydorenko, E.; Kovalchuk, Ya.
Короткий огляд (реферат): The calculation of spatial arched structures was carried out according to two execution options. Calculations were carried out taking into account the limit states of the first and second groups under unfavorable combinations of loads or corresponding efforts. These combinations are established from the analysis of real variants of the simultaneous action of various loads for the analyzed stage of the structure or foundation2022-11-10T00:00:00ZДослідження роботи комбінованого каркасу із залізобетону та дерева багатоповерхової житлової будівлі при дії вітрового навантаженняДзьоба, В.Стасюк, О.Данильченко, Світлана МихайлівнаЧорномаз, Наталя ЮріївнаDzoba, V.Stasiuk, O.Danylchenko, S. M.Chornomaz, N.http://elartu.tntu.edu.ua/handle/lib/390912022-12-05T15:55:28Z2022-11-10T00:00:00ZНазва: Дослідження роботи комбінованого каркасу із залізобетону та дерева багатоповерхової житлової будівлі при дії вітрового навантаження
Автори: Дзьоба, В.; Стасюк, О.; Данильченко, Світлана Михайлівна; Чорномаз, Наталя Юріївна; Dzoba, V.; Stasiuk, O.; Danylchenko, S. M.; Chornomaz, N.
Короткий огляд (реферат): The construction of high-rise residential buildings and business centers from wood is a trend that is gaining more and more popularity in Europe and America. The technologies of wooden construction are constantly being improved, and it becomes obvious that building from wood is profitable, fast, reliable and safe. New records for the construction of multistory buildings using CLT wooden panels and LVL glued beams appear every year2022-11-10T00:00:00ZРозрахунок деформацій елементів роликового ланцюгаЛуців, Ігор ВолодимировичДубиняк, Тарас СтепановичМанзій, О.Андрейчук, С.Lutsiv, I.Dubyniak, T.Manziy, O.Andreichuk, S.http://elartu.tntu.edu.ua/handle/lib/390882022-12-05T15:55:24Z2022-11-10T00:00:00ZНазва: Розрахунок деформацій елементів роликового ланцюга
Автори: Луців, Ігор Володимирович; Дубиняк, Тарас Степанович; Манзій, О.; Андрейчук, С.; Lutsiv, I.; Dubyniak, T.; Manziy, O.; Andreichuk, S.
Короткий огляд (реферат): In order to evaluate the influence of the various factors on the performance of the roller chains, approach is presented to determine the deformations of the chain elements. The calculations are carried out at different levels of chain loading, taking into account the functional clearances between the intermediate plates. As a result the system total
deformations as well as the bending moment acting on the outer plate are determined2022-11-10T00:00:00ZПередмоваhttp://elartu.tntu.edu.ua/handle/lib/390902022-12-05T15:55:37Z2022-11-10T00:00:00ZНазва: Передмова2022-11-10T00:00:00ZОптимізація розміщення аутригерних поверхів у багатоповерхових будівляхСверблюк, В.Sverblyuk, V.http://elartu.tntu.edu.ua/handle/lib/390842022-12-05T15:55:22Z2022-11-10T00:00:00ZНазва: Оптимізація розміщення аутригерних поверхів у багатоповерхових будівлях
Автори: Сверблюк, В.; Sverblyuk, V.
Короткий огляд (реферат): For the optimal design of a multi-story building, a comparative analysis of two options for the placement of outrigger floors was carried out from the point of view of minimizing movements from constant, long-term and main loads, as well as saving steel frame material. Calculations were carried out using the SCAD 21 software complex. The option of placing outriggers on the 12th and 23rd floors of the building was chosen2022-11-10T00:00:00ZКомп’ютерне моделювання напружено-деформівного стану каркасу ангару для літаківТелемко, В.Telemko, V.http://elartu.tntu.edu.ua/handle/lib/390852022-12-05T15:55:25Z2022-11-10T00:00:00ZНазва: Комп’ютерне моделювання напружено-деформівного стану каркасу ангару для літаків
Автори: Телемко, В.; Telemko, V.
Короткий огляд (реферат): Three structural schemes of covering the hangar frame were analyzed and the optimal - frame beam covering was chosen. Modeling of the spatial scheme of the frame was carried out. On the basis of the calculation, which was carried out with using the "Scad 21.1" software complex, taking into account all the necessary factors, the stress-strain state of the load-bearing elements and nodes was investigated2022-11-10T00:00:00ZВизначення напружено-деформованого стану тіл із оболонковими неоднорідностями на основі поєднання сіткових та безсіткових методівКушнір, Р.Пастернак, Ярослав МихайловичСулим, Георгій ТеодоровичKushnir, R. M.Pasternak, Ya. M.Sulym, H. T.http://elartu.tntu.edu.ua/handle/lib/390862022-12-05T15:55:29Z2022-11-10T00:00:00ZНазва: Визначення напружено-деформованого стану тіл із оболонковими неоднорідностями на основі поєднання сіткових та безсіткових методів
Автори: Кушнір, Р.; Пастернак, Ярослав Михайлович; Сулим, Георгій Теодорович; Kushnir, R. M.; Pasternak, Ya. M.; Sulym, H. T.
Короткий огляд (реферат): This study considers numerical methods for analysis of stress/strain state of anisotropic solids containing 3D shell-like deformable inhomogeneities. Based on the coupling principle for continua of different dimension the problem is reduced to the analysis of a 3D solid containing the surface of field discontinuity and the shell with coupled boundary conditions set on the surface of the shell and field discontinuity surface. The problem for a solid with a field discontinuity surface is solved using the boundary element approach, and the problem for a shell is considered using the Petrov – Galerkin meshfree approach with moving least square approximation. Substantiation and validation of the proposed approach is presented2022-11-10T00:00:00ZПросторова задача теплопровідності для двошарової основи з неідеальним тепловим контактом між шарамиАнтоненко, Н.Ткаченко, І.Ткаченко, А.Antonenko, N.Tkachenko, I.Tkachenko, A.http://elartu.tntu.edu.ua/handle/lib/390872022-12-05T15:55:33Z2022-11-10T00:00:00ZНазва: Просторова задача теплопровідності для двошарової основи з неідеальним тепловим контактом між шарами
Автори: Антоненко, Н.; Ткаченко, І.; Ткаченко, А.; Antonenko, N.; Tkachenko, I.; Tkachenko, A.2022-11-10T00:00:00ZВидавнича сторінкаhttp://elartu.tntu.edu.ua/handle/lib/390802022-12-05T15:55:15Z2022-11-10T00:00:00ZНазва: Видавнича сторінка2022-11-10T00:00:00ZВплив залишкових напружень в зварних конструкціях на граничні напруження циклуДегтярев, В.Degtiarev, V. O.http://elartu.tntu.edu.ua/handle/lib/390812022-12-05T15:55:16Z2022-11-10T00:00:00ZНазва: Вплив залишкових напружень в зварних конструкціях на граничні напруження циклу
Автори: Дегтярев, В.; Degtiarev, V. O.
Короткий огляд (реферат): Author proposes a method of determination of the diagrams of ultimate stresses in a cycle for welded components structural elements with different level of steady-state residual stresses based on test results for small specimens2022-11-10T00:00:00ZНапружено-деформований стан за згину круглої пластини з тріщинами з урахуванням смугового контакту їхніх берегівСлободян, М.Кузь, І.Звізло, І.Slobodian, M. S.Kuz’, I. S.Zvizlo, I. S.http://elartu.tntu.edu.ua/handle/lib/390822022-12-05T15:55:17Z2022-11-10T00:00:00ZНазва: Напружено-деформований стан за згину круглої пластини з тріщинами з урахуванням смугового контакту їхніх берегів
Автори: Слободян, М.; Кузь, І.; Звізло, І.; Slobodian, M. S.; Kuz’, I. S.; Zvizlo, I. S.
Короткий огляд (реферат): The solution of the bending problem for a circular isotropic plate with a system of straight through cracks is constructed. Under the external loading the crack faces are in contact along the entire of their length in the area of constant width at the upper base of plate.
The obtained system of singular integral equations is solved by the mechanical quadratures method2022-11-10T00:00:00ZМоделювання роботи просторового каркасу висотної будівліПрищепко, С.Pryshchepko, S.http://elartu.tntu.edu.ua/handle/lib/390832022-12-05T15:55:17Z2022-11-10T00:00:00ZНазва: Моделювання роботи просторового каркасу висотної будівлі
Автори: Прищепко, С.; Pryshchepko, S.
Короткий огляд (реферат): Modeling of the stress-strain state of the spatial frame of a high-rise building office center was carried out. With the use of the Lira-SAPR 2016 software complex a study of the stress-strain state of the monolithic core and overlap taking into account the action of various types of loads was carried out2022-11-10T00:00:00ZЕкспериментальне дослідження напружено-деформованого стану хребтової балки напіввагона з наповнювачемВатуля, Г.Ловська, А.Рибін, А.Павлюченков, М.Петренко, Д.Vatulia, G.Lovska, A.Rybin, A.Pavliuchenkov, M.Petrenko, D.http://elartu.tntu.edu.ua/handle/lib/390792022-12-05T15:55:14Z2022-11-10T00:00:00ZНазва: Експериментальне дослідження напружено-деформованого стану хребтової балки напіввагона з наповнювачем
Автори: Ватуля, Г.; Ловська, А.; Рибін, А.; Павлюченков, М.; Петренко, Д.; Vatulia, G.; Lovska, A.; Rybin, A.; Pavliuchenkov, M.; Petrenko, D.
Короткий огляд (реферат): The loading on the bearing structures of wagons in operation can be reduced by applying closed profiles filled with energy-absorbing material in wagon frame components.
The results of the research demonstrated that with filler in the rod the stresses were reduced by 5% in comparison with stresses in the rod without filler. The difference between the experimental and theoretical strength calculations for the rods was about 3%. The results obtained can be used by those concerned about the development of innovative structures of wagons with better operational characteristics2022-11-10T00:00:00ZЗаголовні сторінкиhttp://elartu.tntu.edu.ua/handle/lib/390782022-12-05T15:55:23Z2022-11-10T00:00:00ZНазва: Заголовні сторінки2022-11-10T00:00:00Z