DSpace Зібрання: Вісник Тернопільського національного технічного університету імені Івана Пулюя, 2017 рік, № 4 (88)Вісник Тернопільського національного технічного університету імені Івана Пулюя, 2017 рік, № 4 (88)http://elartu.tntu.edu.ua/handle/lib/247322024-03-28T17:04:22Z2024-03-28T17:04:22ZExperimental research of the stress-strain state of the railway track metal corrugated structuresЛучко, Йосип ЙосиповичКовальчук, Віталій ВолодимировичКовальчук, Юрій ЄвгеновичLuchko, JosefKovalchuk, VitaliiKovalchuk, Yurihttp://elartu.tntu.edu.ua/handle/lib/247542019-12-27T10:28:03Z2018-01-31T00:00:00ZНазва: Experimental research of the stress-strain state of the railway track metal corrugated structures
Автори: Лучко, Йосип Йосипович; Ковальчук, Віталій Володимирович; Ковальчук, Юрій Євгенович; Luchko, Josef; Kovalchuk, Vitalii; Kovalchuk, Yuri
Короткий огляд (реферат): Розроблено наукові засади нового пристрою для вимірювання та оцінювання напружено-деформованого стану транспортних споруд при змінних температурах та навантаженнях. Технічна задача полягає у прийнятті за результатами моніторингу транспортних споруд науково-обгрунтованих рішень щодо потреби у відновлювальному ремонті того чи іншого елемента, контролю поступового зниження несучої спроможності цих елементів конструкції, встановленні їх фактичного технічного стану та залишкового ресурсу.
В основі нового пристрою лежить вимірювання деформацій за допомогою аналого-цифрового перетворювача (АЦП) та аналогового вимірювального моста – тензометра. Перевагою пропонованого пристрою є те, що точність вимірювань, виконаних за його допомогою, не залежить від довжини з’єднувальних провідників та напруги джерела живлення. За його допомогою можна оцінювати та
враховувати деформації, спричинені також і температурними впливами на транспортні споруди.
Проаналізовано проблеми адаптації закордонних нормативних документів щодо проектування металевих гофрованих конструкцій на залізничних та автомобільних дорогах України. Наведено результати експериментальних і теоретичних розрахунків несучої здатності металевих гофрованих
конструкцій.
При динамічних експериментальних випробуваннях встановлено, що максимальна вертикальна відносна деформація труби зафіксована при проходженні вантажного поїзда і становить 2,74 мм. При цьому залишкова деформація становила 0,21 мм; горизонтальна відносна деформація при проходженні
вантажного поїзда – 0,77 мм. При цьому залишкова деформація становила 0,038 мм. Максимальні фіброві напруження від дії динамічного навантаження у верхній частині труби у визначених точках становили 10,7 МПа.; In the paper the scientific principles of a new device for the measurement and evaluation of
the stress-strain state of transportation facilities under changing temperatures and loads have been developed.
The technical problem solved by this paper deals with the making evidence-based decisions on the need for renewal
of the element, control of the gradual reduction of the bearing capacity of the structural elements, determination
of their real technical condition and residual life according to the transport facilities monitoring.
In the heart of the new device is measuring of strain using analog-to-digital converter (ADC) and analog
measuring bridge - tenzometer. The advantage of the proposed device is that the accuracy of measurements made
by it does not depend on the length of the connecting conductors and supply voltage. The deformations caused by
the temperature effects on transport facilities can be estimated and taken into account too.
The problems of adapting of foreign regulations on the design of metal corrugated structures at the
Ukraine railways and motor roads were analyzed. The results of experimental and theoretical calculations of
bearing capacity of metal corrugated structures were presented.
During dynamic experimental testing it was found: maximum relative vertical deformation of the pipe
was registered for a freight train and equals 2.74 mm. In this case, residual deformation was 0.21 mm; relative
horizontal deformation for a freight train equals 0.77 mm, here residual deformation being 0.038 mm. The
maximum fibre stresses under the dynamic loading at the top of the pipe in specified points equal 10.7 MPa.2018-01-31T00:00:00ZEffect of ionic strength on electro corrosion in chloride and chloride-sulfate environmentsПобережний, Любомир ЯрославовичPoberezhny, Lyubomyrhttp://elartu.tntu.edu.ua/handle/lib/247522019-12-27T09:47:29Z2018-01-31T00:00:00ZНазва: Effect of ionic strength on electro corrosion in chloride and chloride-sulfate environments
Автори: Побережний, Любомир Ярославович; Poberezhny, Lyubomyr
Короткий огляд (реферат): Проведено корозійні випробовування у 12 модельних середовищах що імітують склад грунтових електролітів при різних рівнях густини струму. Для кращого порівняльного аналізу запровоновано в якості характеристичного показника використовувати йонну силу електроліту. Виявлено інверсію швидкості корозії при дії змінного струму, який виявляє інгібуючу дію у середовищах, що містять сульфат-іони. Показано, що із зменшенням рівня рН спостерігається інтенсифікація виділення водню та зростає небезпека водневого окрихчення сталі.; Corrosion tests in 12 model environments simulating the composition of soil electrolytes at different levels of current density has been made. For the best comparative analysis, the ionic strength of the electrolyte has been proposed to be used as the characteristic indicator. The inversion of the corrosion rate under the action of an alternating current is found, which exhibits an inhibitory effect in the environment containing sulfate ions. It is shown, that with the decrease of the pH level, the intensification of hydrogen release is observed
and the danger of hydrogen embrittlement of steel is increasing2018-01-31T00:00:00ZInfluence of the gas hydrates and concentration of corrosive components on the nature and rate of corrosion processes on pipelinesГрицанчук, Андрій ВалентиновичHrytsanchuk, Andriihttp://elartu.tntu.edu.ua/handle/lib/247532019-12-27T10:03:27Z2018-01-31T00:00:00ZНазва: Influence of the gas hydrates and concentration of corrosive components on the nature and rate of corrosion processes on pipelines
Автори: Грицанчук, Андрій Валентинович; Hrytsanchuk, Andrii
Короткий огляд (реферат): За результатами корозійно-механічних випробовувань вперше встановлено
закономірності спільної дії механічних напружень, концентрації хлоридів і гідратоутворення на швидкість та локалізацію корозійних процесів. Розраховано коефіцієнти впливу гідратоутворення для загальної та локальної корозії, які становлять 1,13 і 1,32 відповідно, що підтверджує гіпотезу про інтенсифікацію локальної корозії внаслідок гідратоутворення.; According to the results of corrosion-mechanical tests for the first time the regularities of mutual action of mechanical stresses, concentration of chlorides and hydrate formation on the rate and localization of corrosion processes were established. The coefficients of influence of hydration formation for general and local corrosion were calculated, which make up 1,13 and 1,32, respectively, which confirms the hypothesis about the intensification of local corrosion as a result of hydrate formation.2018-01-31T00:00:00ZInterrelation and kinetics of matersals fatigue damage under "soft" and "rigid" loading modesНовіков, Андрій ІгоровичЦибаньов, Георгій ВасильовичNovikov, AndriiTsyban’ov, Georgiyhttp://elartu.tntu.edu.ua/handle/lib/247512019-12-27T09:42:29Z2018-01-31T00:00:00ZНазва: Interrelation and kinetics of matersals fatigue damage under "soft" and "rigid" loading modes
Автори: Новіков, Андрій Ігорович; Цибаньов, Георгій Васильович; Novikov, Andrii; Tsyban’ov, Georgiy
Короткий огляд (реферат): Наведено розрахункове оцінювання кінетики втомного пошкодження та пружно-
пластичного напружено-деформованого стану (НДС) сталей за жорстких режимів циклічного
навантаження з використанням моделі граничного вичерпання циклічної пластичності (ГВЦП). Для цього використано розроблену раніше методику підсумовування втомних пошкоджень, яка дозволяє розраховувати кінетику втомних пошкоджень при нерегулярному циклічному навантаженні. Показано відмінність у накопиченні втомних пошкоджень та кінетики пружно-пластичного НДС для жорстких режимів по повній та непружній деформаціях на прикладі двох матеріалів: циклічно зміцнюваної сталі 45 та циклічно знеміцнюваної сталі 1Х2М. Розрахунки за допомогою ГВЦП моделі показують, що для
матеріалів, які при циклічному навантаженні мають нестабільність непружної деформації, коефіцієнт підсумовування втомного пошкодження значно відрізняється від оцінки за лінійною гіпотезою підсумовування. Наведені результати можуть бути використані для розрахункового оцінювання довговічності елементів конструкцій, які працюють у режимі жорсткого навантаження, з меншою похибкою у порівнянні з застосуванням стабілізованих значень непружних деформацій і відомих гіпотез
підсумовування втомних пошкоджень. Це пов’язано з тим, що запропонована розрахункова модель описує відмінність у накопиченні втомних пошкоджень за змінних амплітуд циклічного навантаження для матеріалів з різною кінетикою непружних деформацій. У свою чергу, це дає можливість теоретично обґрунтувати необхідність урахування особливостей кінетики непружних деформацій в умовах жорсткого режиму навантаження та описати відмінність і нелінійний характер накопичення втомних пошкоджень у цьому режимі для вказаних груп матеріалів.; In the article the calculating estimation of fatigue damage and plasto-elastic stress-strain state (SSS) kinetics of steels under the “rigid” cyclic loading modes using the ultimate exhaustion of cyclic plasticity (UECP) model is presented. To do this the previously developed method of fatigue damage summation, which
allows to calculate the kinetics of fatigue damage under irregular cyclic loading, was used. The difference in the accumulation of fatigue damage and the kinetics of elastic-plastic SSS for two “rigid” cyclic loading modes (total and inelastic strains control loadings) are shown on the example of two materials: cyclically hardening steel 45 and cyclically softening steel 1Х2М. Besides, calculations with help of the UECP model show, that for the materials with cyclic inelastic strain instability during cyclic loading fatigue damage summation rate is significantly different as compared with the same obtained by the linear summation hypothesis. The results
presented can be used for calculating lifetime estimation of structural elements operating under “rigid” loading modes with a higher accuracy as compared with the use of both stabilized values of inelastic strains and well-known fatigue damage summation hypotheses. This is due to the fact, that the proposed calculative UECP model describes the difference in fatigue damage accumulation under variable cyclic load amplitudes for the materials with different kinetics of inelastic strains. In its turn, it makes possible to substantiate theoretically the necessity of taking into account the inelastic strain kinetics peculiarities under the “rigid” loading modes and to describe the difference and nonlinear nature of fatigue damage accumulation under these loading modes for the specified groups of materials.2018-01-31T00:00:00ZThermomagnetoelectroelasticity of anisotropic solids with spatial non-flat thin inclusionsПастернак, Роман МихайловичПастернак, Ярослав МихайловичСулим, Георгій ТеодоровичPasternak, RomanPasternak, IaroslavSulym, Heorhiyhttp://elartu.tntu.edu.ua/handle/lib/247492019-12-27T09:38:36Z2018-01-31T00:00:00ZНазва: Thermomagnetoelectroelasticity of anisotropic solids with spatial non-flat thin inclusions
Автори: Пастернак, Роман Михайлович; Пастернак, Ярослав Михайлович; Сулим, Георгій Теодорович; Pasternak, Roman; Pasternak, Iaroslav; Sulym, Heorhiy
Короткий огляд (реферат): На основі застосування принципу спряження континуумів різної вимірності
запропоновано математичні моделі тонких деформівних включень у термомагнітоелектропружних тілах. Побудовано інтегральні рівняння відповідної задачі та метод граничних елементів для розв’язування. Ключовими особливостями останнього є використання розривних елементів, спеціальних функцій форми, нелінійних відображень для згладжування підінтегральних виразів на межах елементів та модифікованих квадратур Кутта для обчислення особливих інтегралів. Усе це дало можливість
створити високоефективний числовий підхід розв’язування сформульованого класу задач. Наведено числовий приклад із вивчення тонкої неоднорідності у формі параболоїда.; Based on the application of coupling principle for continua of different dimension the mathematical models of thin deformable inclusions for thermomagnetoelectroelastic solids are proposed.
Corresponding integral equations are derived and the boundary element method for their solution is developed.
The key features of the latter are the usage of discontinuous boundary elements, special shape functions, nonlinear mappings for smoothing the sub-integral at the element’s boundary and the modified Kutt’s quadrature for
numerical evaluation of singular integrals. All these made possible to develop efficient numerical approach for the solution of the stated problem class. Numerical example is considered, which studies thin inhomogeneity of paraboloidal shape.2018-01-31T00:00:00ZInfluence of the cutting direction of the Charpy specimens from the steel 10GN2MFA on the components of the fracture energy and the ductile-to-brittle transition temperatureКравчук, Андрій ВасильовичКондряков, Євгеній ОлександровичПанасенко, Олександр В’ячеславовичХарченко, Валерій ВолодимировичKravchuk, AndriyKondryakov, IevgenPanasenko, OleksandrKharchenko, Valeriyhttp://elartu.tntu.edu.ua/handle/lib/247502019-12-27T09:37:37Z2018-01-31T00:00:00ZНазва: Influence of the cutting direction of the Charpy specimens from the steel 10GN2MFA on the components of the fracture energy and the ductile-to-brittle transition temperature
Автори: Кравчук, Андрій Васильович; Кондряков, Євгеній Олександрович; Панасенко, Олександр В’ячеславович; Харченко, Валерій Володимирович; Kravchuk, Andriy; Kondryakov, Ievgen; Panasenko, Oleksandr; Kharchenko, Valeriy
Короткий огляд (реферат): Проведено ударні випробування стандартних зразків Шарпі зі сталі 10ГН2МФА,
вирізаних у двох напрямках – поздовжньому та поперечному, за різних температур на
інструментованому вертикальному копрі. За результатами випробувань побудовано температурні залежності повної енергії деформування, руйнування та її складових. За результатами фрактографічних досліджень отримано температурні залежності питомих енергій на різних ділянках поверхні зламу та проведено їх порівняння для двох груп зразків. Визначено критичні температури крихкості.; The Charpy specimens impact tests are one of more simple and inexpensive methods to determine the mechanical properties of materials. The results of these tests can be used to estimate the strength and durability of large-scale structures. A series of the Charpy specimens impact test from high-alloyed high-temperature resistant steel10GN2MFA were carried out in the temperature range of –130 ÷ +70ºС with control of cutting direction. The tests were conducted on instrumented vertical impact machine, which can record a full diagram of specimen’s deformation and fracture. The values of total energy of deformation and fracture and its
components: energy of crack initiation, energy of ductile crack growth, brittle cracks energy and ductile rupture energy were determined. It was found, that ductile-brittle transition temperature for specimens cut in longitudinal direction (group GK) is higher than for specimens cut in transversal direction (group GO). It is shown, that the cutting direction of Charpy specimens significantly influences the values of total energy of deformation and fracture and its components, and the values of the ductile-brittle transition temperature for 10GN2MFA steel.2018-01-31T00:00:00ZCalculation of constructive parameters of SMA damperЯсній, Петро ВолодимировичКолісник, Микола БогдановичКонончук, Олександр ПетровичЯсній, Володимир ПетровичYasniy, PetroKolisnyk, MykolaKononchuk, OleksandrIasnii, Volodymyrhttp://elartu.tntu.edu.ua/handle/lib/247482019-12-27T09:38:08Z2018-01-31T00:00:00ZНазва: Calculation of constructive parameters of SMA damper
Автори: Ясній, Петро Володимирович; Колісник, Микола Богданович; Конончук, Олександр Петрович; Ясній, Володимир Петрович; Yasniy, Petro; Kolisnyk, Mykola; Kononchuk, Oleksandr; Iasnii, Volodymyr
Короткий огляд (реферат): Запропоновано демпфуючий пристрій, заснований на використанні ефекту
псевдопружності сплавів із пам’яттю форми (СПФ). Пристрій складається із попередньо розтягнених дротів із сплаву з пам’яттю форми та двох стиснених пружин, які забезпечують розтяг дротів.
Попередньо розтягнені дроти зі сплаву з СПФ забезпечують надійність системи й добрі демпфуючі властивості, а попередньо стиснені пружини – відновлення пристрою до початкового положення після зняття зовнішнього навантаження. Запропоновано методику розрахунку міцнісних і конструктивних параметрів демпфуючого пристрою. Визначено зусилля та величину попереднього натягу дротів СПФ та максимальне граничне значення переміщення його пристрою під дією зовнішнього зусилля. Також
визначено гранично допустиме зусилля у дротах.; Shape memory alloy (SMA) based damper device is presented in this paper. The device is composed of pre-tensioned SMA wires and two pre-compressed springs which supply tension of the wires. Pre-tensioned SMA wires provide the system reliability and good damping properties. After removing the external load
pre-compressed springs provide recovery of the device to its original shape. The calculation method of strength and constructive parameters of the damping device is offered. The internal force, the maximal displacement value and the pre-tension magnitude of SMA wires are defined. The maximum allowable internal force of the wires is determined.2018-01-31T00:00:00ZPublish pagehttp://elartu.tntu.edu.ua/handle/lib/247472019-12-27T11:13:30Z2018-01-31T00:00:00ZНазва: Publish page2018-01-31T00:00:00ZFor noteshttp://elartu.tntu.edu.ua/handle/lib/247462019-12-27T11:13:07Z2018-01-31T00:00:00ZНазва: For notes2018-01-31T00:00:00ZMethod of segmentation of determined cyclic signals for the problems related to their processing and modelingЛитвиненко, Ярослав ВолодимировичLytvynenko, Iaroslavhttp://elartu.tntu.edu.ua/handle/lib/247452019-12-27T11:11:34Z2018-01-31T00:00:00ZНазва: Method of segmentation of determined cyclic signals for the problems related to their processing and modeling
Автори: Литвиненко, Ярослав Володимирович; Lytvynenko, Iaroslav
Короткий огляд (реферат): Розроблено метод адаптивної сегментації детермінованих циклічних сигналів.
Розв’язано задачу сегментації (розбиття, поділу сигналу на характерні сегменти) циклічного
детермінованого сигналу (циклічної числової функції та циклічної інтервальної функції) із сегментною
структурою. Наведено приклади сегментації змодельованих та реальних циклічних сигналів,оцінено
точності розробленого методу сегментації.; In this work the method of adaptive segmentation of determined cyclic signals has been
developed. The problem of segmentation (breakdown, division of the signal into distinctive segments) of the cyclic
determined signal (of the cyclic numeric function and the cyclic interval function) with a segment structure has
been solved. Examples of segmentation of simulated and real cyclic signals are provided; an assessment of the
accuracy of the developed method of segmentation has been made.2018-01-31T00:00:00ZProblems of intellectualizing in SHM systems: estimation, prediction, multi-class recognitionБурау, Надія ІванівнаЦибульник, Сергій ОлексійовичРупіч, Сергій СергійовичBouraou, NadiiaTsybulnik, SergiyRupich, Sergiyhttp://elartu.tntu.edu.ua/handle/lib/247422020-01-09T12:44:01Z2018-01-31T00:00:00ZНазва: Problems of intellectualizing in SHM systems: estimation, prediction, multi-class recognition
Автори: Бурау, Надія Іванівна; Цибульник, Сергій Олексійович; Рупіч, Сергій Сергійович; Bouraou, Nadiia; Tsybulnik, Sergiy; Rupich, Sergiy
Короткий огляд (реферат): Досліджено ефективність вирішення завдань інтелектуалізації багатоканальних
систем моніторингу технічного стану складних просторових об’єктів зі зварними з’єднаннями – резервуарів з екологічнонебезпечними речовинами. На основі моніторингових моделей об’єкта обґрунтовано та розроблено підсистему візуалізації для відображення та прогнозування характеристик напружено-деформованого стану, просторового положення та вібраційного стану. Для багатокласового розпізнавання технічного стану резервуару при появі та розвитку багатоосередкових пошкоджень
обґрунтовано використання класифікатора на основі ймовірнісної нейронної мережі. Сформовано навчальні й тестові множини вхідних багатовимірних векторів діагностичних ознак, виконано навчання класифікатора та багатокласове розпізнавання стану у випадку деградації конструкції. Встановлено залежності показника ефективності класифікатора від параметра впливу мережі для різних порядків значень діагностичних ознак.; The paper is devoted to the research of the efficiency of solving the intellectualization
problems of multi-channel systems for the structural health monitoring of complex spatial objects with welded
joints - tanks with ecologically hazardous substances. Based on the monitoring models of the object a visualization
subsystem is developed for the reflection and prediction of the stress-strain state characteristics, spatial position
and vibration state. The use of a classifier based on a probabilistic neural network has been developed for the
multi-class recognition of structural health of the tank with the multi-site damage. Learning and test sets of the
incoming multidimensional vectors of diagnostic features have been formed, classifier training and multi-class
recognition in the case of structural degradation have been performed. The dependencies of the efficiency of the
classifier on the parameter of the network influence for different values orders of diagnostic features have been
found.2018-01-31T00:00:00ZContenthttp://elartu.tntu.edu.ua/handle/lib/247442019-12-27T11:12:45Z2018-01-31T00:00:00ZНазва: Content2018-01-31T00:00:00ZMathematical modeling of processes of nonisothermal adsorption, desorption and heat transfer of hydrocarbons in nanoporous catalysts based on zeolite ZSM-5 of exhaust gas neutralization systemsПетрик, Михайло РомановичБойко, Ігор ВолодимировичМихалик, Дмитро МихайловичПетрик, Марія МихайлівнаЛуцик, Надія СтепанівнаКовбашин, Василь ІвановичPetryk, MykhayloBoyko, IgorMykhalyk, DmytroPetryk, MariaLutsyk, NadiiaKovbashyn, Vasylhttp://elartu.tntu.edu.ua/handle/lib/247432019-12-27T11:10:18Z2018-01-31T00:00:00ZНазва: Mathematical modeling of processes of nonisothermal adsorption, desorption and heat transfer of hydrocarbons in nanoporous catalysts based on zeolite ZSM-5 of exhaust gas neutralization systems
Автори: Петрик, Михайло Романович; Бойко, Ігор Володимирович; Михалик, Дмитро Михайлович; Петрик, Марія Михайлівна; Луцик, Надія Степанівна; Ковбашин, Василь Іванович; Petryk, Mykhaylo; Boyko, Igor; Mykhalyk, Dmytro; Petryk, Maria; Lutsyk, Nadiia; Kovbashyn, Vasyl
Короткий огляд (реферат): Описано експериментальне й теоретичне дослідження неізотермічної адсорбції та десорбції газу з використанням мікропористих каталізаторів для технології паливних двигунів. Аналітичні розв’язки проблеми неізотермічної адсорбції, десорбції й теплообміну побудовано на основі
операційного методу Хевісайда та інтегральних перетвореннях Лапласа. Представлено числове моделювання розподілів компонентів пропану та інших вуглеводнів на вході й виході цеолітного ложе для
кожної адсорбційно-десорбційної фази в часі.; An experimental and theoretical study of the non-isothermal adsorption and desorption of gas using microporous silica beds for motor fuel technology is described. Analytical solutions to the problem of non-isothermal adsorption and desorption and heat transfer are based on Heaviside’s operational method and
Laplace integral transformation. Modeling distributions of propane ant others hydrocarbon components at the inlet and outlet of the silica beds for each adsorption - desorption phase at different times are presented.2018-01-31T00:00:00ZImitation modeling for the investigation of the loaded lock of mobile versta - workКовалевський, Сергій ВадимовичКовалевська, Олена СергіївнаKovalevskyy, SergiiKovalevska, Olenahttp://elartu.tntu.edu.ua/handle/lib/247412019-12-27T11:06:04Z2018-01-31T00:00:00ZНазва: Imitation modeling for the investigation of the loaded lock of mobile versta - work
Автори: Ковалевський, Сергій Вадимович; Ковалевська, Олена Сергіївна; Kovalevskyy, Sergii; Kovalevska, Olena
Короткий огляд (реферат): Розглянуто питання динамічного аналізу виконавчої ланки верстатної системи.
Проаналізовано розрахункову схему, що складається з просторової системи, підвішеної в просторі на гнучких елементах. Отримано математичний опис гармонічного осцилятора, яким є виконавча ланка мобільного верстата. Створено імітаційну модель в комп'ютерному середовищі Simulink для дослідження особливостей динаміки навантаженої виконавчої ланки мобільного верстата. Отримано реакцію моделі на вимушені гармонійні коливання, що має квазівипадковий характер при синусоїдальному впливі. Отриманий результат дозволяє припустити, що у виконавчій ланці мобільного верстата
виникають коливання з широким частотним і амплітудним спектром, здатні викликати резонанс елементів технологічної системи в широкому діапазоні частот.; In this article the issues of dynamic analysis of the executive branch of the machine system
are considered. The analysis of the design scheme consisting of the spatial system, suspended in space on the
flexible elements, was carried out. The mathematical description of the harmonic oscillator, which is the executive
link of the mobile machine, is obtained. A simulation model was created in the Simulink computer environment to
study the dynamics of the loaded executive of the mobile machine. The reaction of the model to forced harmonic
oscillations, which has quasi-random character, with sinusoidal influence, is obtained. The obtained result
suggests that in the operating unit of the mobile machine there are oscillations with a wide frequency and
amplitude spectrum, which can cause resonance of elements of the technological system in a wide frequency range.2018-01-31T00:00:00ZDecrease of surfaces roughness for parts processed with edge tool by improvement of the lathe working components uniform feedСтепчин, Ярослав АнатолійовичОтаманський, Валентин ВладиславовичStepchyn, YaroslavOtamanskyi, Valentynhttp://elartu.tntu.edu.ua/handle/lib/247402019-12-27T11:04:51Z2018-01-31T00:00:00ZНазва: Decrease of surfaces roughness for parts processed with edge tool by improvement of the lathe working components uniform feed
Автори: Степчин, Ярослав Анатолійович; Отаманський, Валентин Владиславович; Stepchyn, Yaroslav; Otamanskyi, Valentyn
Короткий огляд (реферат): Виконано аналіз процесу утворення шорсткості поверхонь деталей, оброблених лезовим
інструментом під впливом вібраційного переміщення робочих органів металорізальних верстатів.
Розглянуто методи прогнозування геометричних параметрів якості поверхонь деталей. Визначено, що
інтенсивність нерівномірного переміщення супорту (столу) металорізального верстата залежить від
режиму роботи напрямних, тобто в яких умовах проходить тертя двох поверхонь при їх відносному
переміщенні. Змішане тертя найбільш негативно впливає на рівномірність руху робочих органів. Для
покращення рівномірності руху супорту (столу) металорізальних верстатів на малих (чистових) подачах
запропоновано переходити в сухий (граничний) режим тертя напрямних, проводячи обробку з додатковим
навантаженням робочого органу. Наведено результати проведених досліджень під навантаженням
робочого органу, пов'язаних із впливом нерівномірності подач супорта (столу) на шорсткість обробленої
поверхні. В ході досліджень встановлено, що стрибкоподібний рух на малих (чистових) подачах робочих
органів металорізальних верстатів менш інтенсивний, тому шорсткість поверхні оброблених деталей
покращується.; The relative motion smoothness of the tool and processing workpiece has an essential
influence on the quality of the edge tool processing. The analyses of the process of the surface roughness formation
on the parts processed with an edge tool under the influence of vibration movement of the metal-cutting lathes
working components is carried out in this paper. The methods of prediction of the geometric parameters of the
part surface quality are considered. It is determined here that the intensity of non-uniform metal-cutting lathe slide
movement depends on the guide operating mode, that is, the conditions under which the friction of two surfaces
occurs at their relative movement. Mixed friction influences the working components uniform motion the most
negatively. In order to improve the uniform metal-cutting lathe support movement at light (fine) feeds it is
suggested to go into guide dry (limiting) friction performing the processing with the additional loading of the
working component. The results of the researches carried out under the working component loading connected
with the influence of non-uniform support feed on the processed surface roughness are described. It was
determined during the investigations that the stick-slip motion at light feeds of metal-cutting lathes working
components is less intensive and the surface roughness of processed parts is improved2018-01-31T00:00:00ZRisk indicators and diagnostic models for sudden failuresБілодіденко, Сергій ВалентиновичГречаний, Олексій МиколайовичІбрагімов, Мехман Саядулла-оглиBelodedenko, SergeiGrechany, AlexeiIbragimov, Mehmanhttp://elartu.tntu.edu.ua/handle/lib/247392019-12-27T11:02:50Z2018-01-31T00:00:00ZНазва: Risk indicators and diagnostic models for sudden failures
Автори: Білодіденко, Сергій Валентинович; Гречаний, Олексій Миколайович; Ібрагімов, Мехман Саядулла-огли; Belodedenko, Sergei; Grechany, Alexei; Ibragimov, Mehman
Короткий огляд (реферат): Обґрунтовано метод ресурсного індексу безпеки. Він використовується для оцінювання надійності як поступових, так і раптових відмов. Розроблено модель періодичності викидів для механічних систем промислового виробництва.; The method of the resource safety index is substanciated. It is used to assess reliability, with both gradual and sudden failures. A model of the periodicity of emissions for mechanical systems of industrial production is developed.2018-01-31T00:00:00ZInvestigation of the influence of boundary conditions and degradation factor of the surface layer on the GTE structural elements stress-strain stateКравчук, Леонід ВасильовичЗадворний, Євгеній ОлександровичБуйських, Костянтин ПавловичФеофентов, Микола МиколайовичКиселевська, Світлана ГригорівнаKravchuk, LeonidZadvornyi, EvgeniiBuiskykh, KostiantynFeofentov, MykolaKyselevska, Svitlanahttp://elartu.tntu.edu.ua/handle/lib/247372019-12-27T10:56:16Z2018-01-31T00:00:00ZНазва: Investigation of the influence of boundary conditions and degradation factor of the surface layer on the GTE structural elements stress-strain state
Автори: Кравчук, Леонід Васильович; Задворний, Євгеній Олександрович; Буйських, Костянтин Павлович; Феофентов, Микола Миколайович; Киселевська, Світлана Григорівна; Kravchuk, Leonid; Zadvornyi, Evgenii; Buiskykh, Kostiantyn; Feofentov, Mykola; Kyselevska, Svitlana
Короткий огляд (реферат): Показано вплив граничних умов нестаціонарного термоциклічного навантаження та деградації поверхневих шарів матеріалу на напружено-деформований стан матеріалу клиновидних зразків, що моделюють кромку лопаток газотурбінних двигунів, з використанням методів фізичного і математичного моделювання за наявності дефектів типу тріщин. Вказано на необхідність дослідження процесів змін структури і властивостей матеріалу, теплового та напружено-деформованого стану
матеріалу для визначення можливості безпечного подовження встановленого ресурсу існуючого обладнання, забезпечення економічності та надійності нових енергетичних систем.; The influence of the boundary conditions of the nonstationary thermal cyclic loading and degradation of the material surface layers on the stress-strain state of the material of the wedge-shaped specimens, which model the gas-turbine engine blade edge, is shown using the methods of physical and mathematical
modeling with the presence of crack-type defects. The necessity of the investigation of structural changes and properties of the material, thermal and thermal-deformed state of the material is demonstrated to determine the possibilities of safe extension of the given lifetime of the equipment and assurance of efficiency as well as reliability of energy systems.2018-01-31T00:00:00ZDiagnosis of longitudinal welded joints of tubes by the method of magnetoelastic acoustic emissionПочапський, Євген ПетровичКлим, Богдан ПетровичРудак, Мар’ян ОлеговичВеликий, Петро ПилиповичPochapskyi, YevhenKlym, BohdanRudak, MarianVelykyi, Petrohttp://elartu.tntu.edu.ua/handle/lib/247382019-12-27T10:59:36Z2018-01-31T00:00:00ZНазва: Diagnosis of longitudinal welded joints of tubes by the method of magnetoelastic acoustic emission
Автори: Почапський, Євген Петрович; Клим, Богдан Петрович; Рудак, Мар’ян Олегович; Великий, Петро Пилипович; Pochapskyi, Yevhen; Klym, Bohdan; Rudak, Marian; Velykyi, Petro
Короткий огляд (реферат): Досліджено мікроструктуру сталі 19Г та 17Г1С труб після довготривалої
експлуатації. Встановлено залежність зміни параметрів сигналів магнетопружної акустичної емісії від структури різних зон зварного з'єднання. Досліджено вплив залишкових напружень після зварювання на зміну суми амплітуд сигналів магнетопружної акустичної емісії.; The microstructure of the steel 19H and 17H1S pipes after long-term operation is investigated. Dependence of the magnetoelastic acoustic emission signals characteristic change on the structure of different areas of the welded joint is determined. The effect of residual stresses after welding on the change of the signals amplitude sum of magnetoelastic acoustic emission has been investigated.2018-01-31T00:00:00ZBiaxial tension of the plate softened by the Griffiths crackПанько, Ігор МиколайовичШтаюра, Степан ТеодоровичПанько, Олег ІгоровичШтаюра, Наталія СтепанівнаPanko, IgorShtayura, StepanPanko, OlegShtayura, Nataliyahttp://elartu.tntu.edu.ua/handle/lib/247362019-12-27T10:48:47Z2018-01-31T00:00:00ZНазва: Biaxial tension of the plate softened by the Griffiths crack
Автори: Панько, Ігор Миколайович; Штаюра, Степан Теодорович; Панько, Олег Ігорович; Штаюра, Наталія Степанівна; Panko, Igor; Shtayura, Stepan; Panko, Oleg; Shtayura, Nataliya
Короткий огляд (реферат): В рамках пружної постановки розв’язано задачу про двовісне навантаження площини з еліпсоподібним дефектом. Використовуючи цей розв’язок та деформаційний підхід [1, 6], отримано розв’язок для площини, послабленої тріщиною за умов двовісного навантаження в пружно-пластичній постановці. На цій основі запропоновано деформаційний критерій критичного розкриття вершини тріщини. Показано, що наявність розтягуючих зусиль, паралельних більшій осі дефекта, призводить до збільшення розкриття вершини тріщини та зменшення переміщень берегів тріщини уздовж меншої осі.; According to the elastic approach the biaxial loading problem of the plane with an elliptical defect was solved. Using the obtained solution and the deformation approach [1, 3] the solution for the cracked plane under the biaxial load in the elastic-plastic statement has been obtained. Thereupon a deformation criterion
for the critical crack tip opening has been proposed. It was shown, that the tensile load applied parallely to the major defect axis results in the increase of the crack tip opening and the decrease of the crack shores displacement along the minor axis.2018-01-31T00:00:00ZThe influence of the rods angular profile height on rectangular welder truss deformationКовальчук, Ярослав ОлексійовичШингера, Наталія ЯрославівнаKovalchuk, YaroslavShynhera, Natalyahttp://elartu.tntu.edu.ua/handle/lib/247352019-12-27T10:43:31Z2018-01-31T00:00:00ZНазва: The influence of the rods angular profile height on rectangular welder truss deformation
Автори: Ковальчук, Ярослав Олексійович; Шингера, Наталія Ярославівна; Kovalchuk, Yaroslav; Shynhera, Natalya
Короткий огляд (реферат): Виконано дослідження деформівних властивостей п’яти зварних прямокутних ферм
18000 х 3600 мм при дії зовнішніх статичних навантажень. Дослідні зрази виготовлено зі стальних вальцьованих кутникових профілів з різною висотою полички. Вибрано схему навантажування, яка ідентифікує експлуатаційний режим для конструкції такого типу. За результатами виконання комп’ютерного моделюючого експерименту в середовищі ANSYS Workbench 14.5 отримано значення деформацій уздовж нижнього пояса для кожної з ферм, максимальні деформації ферм у межах пружних властивостей конструктивних елементів та залежність тримкості конструкції від її матеріаломісткості. Отримані результати становлять теоретичний і практичний інтерес як для проектування нових ферм, так і для перевірки тримкості ферм, які експлуатуються.; The paper is devoted to the study of deformation properties of five 18000 x 3600 mm welded rectangular trusses under the external static loads. Experimental specimens are made of the steel rolled angular profiles with different beam seat height. The scheme of loading specifying the operating mode of such a structure
type has been chosen. Computer simulation experiment in ANSYS Workbench 14.5 software was performed.
According to the results the values of deformation along the lower chord for each truss, maximum trusses deformations within the elastic properties of structural elements and dependence of bearing ability of the structure on its material consumption have been obtained . The results obtained are of theoretical and practical interest for both new trusses designing and testing of the bearing ability of trusses being in operation.2018-01-31T00:00:00ZEditorial pageshttp://elartu.tntu.edu.ua/handle/lib/247332019-12-27T11:12:24Z2018-01-31T00:00:00ZНазва: Editorial pages2018-01-31T00:00:00ZThe problem of reducing the stress concentration on the boundary of the cavities medium under the dynamic load actionМікуліч, Олена АркадіївнаШваб’юк, Василь ІвановичMikulich, OlenaShvabjuk, Vasyl’http://elartu.tntu.edu.ua/handle/lib/247342019-12-27T10:45:26Z2018-01-31T00:00:00ZНазва: The problem of reducing the stress concentration on the boundary of the cavities medium under the dynamic load action
Автори: Мікуліч, Олена Аркадіївна; Шваб’юк, Василь Іванович; Mikulich, Olena; Shvabjuk, Vasyl’
Короткий огляд (реферат): Досліджено ефективність використання додаткових перепон у вигляді тунельних
порожнин еліптичного перерізу, що розміщені на шляху хвилі, для зменшення динамічної концентрації
напружень. На основі методу, що поєднує використання перетворення Фур’є за часом, метод граничних
інтегральних рівнянь досліджено розподіл динамічних кільцевих напружень на границі порожнин та
радіальних напружень у тілі, побудовано часові зрізи полів напружень.; The effectiveness of the use of additional barriers in the form of tunnel cavities of the elliptic
section located on the wave propagation to reduce the dynamic concentration of stresses is investigated in this
paper. The distribution of dynamic hoop stresses on the boundary of cavities and radial stresses in a medium are
studied on the basis of the method combining the use of Fourier transformation in time and the method of boundary
integral equations. Fixed time snapshots of stress fields are developed.2018-01-31T00:00:00Z